These high quality Akiles Brass Plated Eyelets are designed for use with the Akiles eyelet punch. Each eyelet measures 4.8mm x 4.6mm and can hold up to 30 sheets of 20lb bond. These eyelets are packaged with 250 per bag and offer an excellent, economical way for you to bind your documents, samples or other items. Check them out today.

On Sale Now for Only: $5.95

The GBC VeloBind Debinder tool is a special tool that is designed specifically to debind your documents bound with a hot knife Velobind or SureBind System. The VeloBind tool includes a special razor blade designed to cut open your strip bound books without risking your safety.

On Sale Now for Only: $19.95

These Premium Coil Crimpers / Hand Crimping Pliers are specially designed to crimp the ends of your spiral coil binding elements. They cut and crimp your coil in a single and simple motion giving your coil bound documents a professional look in just seconds.

On Sale Now for Only: $24.95

SlanTIS Coil Binding Sleeves will securely hold your documents in place while inserting coil, making your coil binding tasks hassle-free. Designed to save you time, SlanTIS Binding sleeves are extremely easy to use. With sizes ranging from 1/4 inch up to 2 inches, they are suitable for just about any coil binding job.

On Sale Now for Only: $29.95

Crimpers make the potentially difficult task of finishing coil binding easy and effective, and these Premium Spiral Coil Crimpers are GBC's most popular pliers for smaller coil sizes (6mm to 16mm). In one motion, they both cut and crimp coils preventing them from spinning off the book. The red dot on top makes sure you always cut and crimp correctly. If you're doing any sort of binding with smaller coils, these crimpers from GBC are essential.

On Sale Now for Only: $30.00

The Akiles half moon calendar punch is designed so that you can quickly and easily add a half moon punch to your documents for use in binding calendars. This type of punch is primarily used in conjunction with twin loop wire binding and pre-formed calendar hangers. The half moon punch is normally centered along the binding edge of you calendar. The pre-formed calendar hanger is bound into the document with wire binding spines on both the left and right. Most other half-moon punches cost at least twice as much as this unit. However, the Akiles Half Moon Calendar Punch will offer you all the quality you need to produce short run calendars for your organization or for your customers.

On Sale Now For Only: $38.46

These special oval hole spiral coil crimping pliers are designed specifically for use with an oval hole coil binding pattern like the one used with the GBC Digicoil automatic coil inserter. Like standard coil crimping pliers these crimpers both cut and crimp the ends of your spiral coil bound documents in a single step. However, these pliers are designed to leave a longer throw at the end of the coil (the part that is bent over) this is necessary for binding documents with oval holes and is extremely useful for use with 3:1 pitch coil and with 2.5 to 1 0.400 pitch coil. The longer throw helps to ensure that your coil will not spin back off the document during use.

On Sale Now for Only: $42.00

The Akiles hand held eyelet punch provides a fast, easy and economical way for you to add an eyelet to your documents, samples or other projects. This unit will both produce the hole for the eyelets but will also work to allow you to set the eyelet in place. This unit is designed for use with eyelets that are 4.8mm x 4.6mm in diameter. It even has an adjustable punching margin and a guide ruler. Check out the Akiles Hand Held Eyelet Punch and Setter today.

On Sale Now For Only: $49.95

The Rhin-O-Tuff wire hanger is designed to attach to the HD8000 Wire Closer. It provide and assit the process of inserting the wire prior to setting into the closer to crimp. This will help enhance the final finish product with equal measurement of the cut coil. Finish perfect and strong with the Rhin-O-Tuff wire hanger!

On Sale Now for Only: $525.00

The Renz WBS340 wire closer, CBS340 coil inserter and PBS340 comb opener are designed to conveniently hang on the front of your DTP modular binding punch. However, if you want to use these modules as a stand alone device or if you don't have a DTP punch then you will need a special module holder to hold the module in place while you use it. This special metal stand is made of heavy duty metal and is sturdy enough to hold the piece of finishing equipment in place while you use it.

On Sale Now for Only: $63.00

Finish your spiral binding project strong with these crimping pliers. The Rhin-O-Tuff crimping pliers are designed to professionally finish binding documents, providing a exceptional finish. The coils are cut in one smooth motion, providing a bend spiral to preserve the valuable document.

On Sale Now for Only: $63.00

The GBC TL2900 Replacement Hook Kit includes the replacement hooks for the GBC TL2900 electric twin loop wire closer. Over time the hooks on the TL2900 can become bent causing the wire spines to not close correctly. If you are having this problem then chances are you need to replace the hooks on your machine. Changing the hooks really isn't that hard and helps to ensure that your electric twin loop wire closer provides you with a consistent high quality finished product every time.

On Sale Now for Only: $95.00
With Free Shipping

These premium spiral coil binding pliers are made by Renz and are designed specifically for use with your Renz spiral coil binding system. These pliers are designed to cut and crip the ends of your spiral coil elements to prevent the coils from spinning back off the edge of your book after your documents are bound. These SC Cutting and Bending pliers are made of high quality steel and have cushioned handles to help ensure that they fit comfortably in your hand while you are using them. Check out the Renz SC Cutting and Bending Pliers today.

On Sale Now for Only: $111.00
With Free Shipping

For the ultimate Rhin-O-Tuff assembly, trust the Rhin-O-Tuff Mounting Kit for HD Punches for the premium transformation. The mounting kit is designed for the HD7000 and HD7700 Ultima, creating a stable attachment. For the most efficient and productive 2-in-1 system, Rhin-O-Tuff is the brand to trust!

On Sale Now for Only: $115.00
With Free Shipping

Watch your Onyx OD4012 transform to the premium punch and finish machine with the Rhin-O-Tuff Mounting Kit for OD Punches. By mounting the modules on top of the punch machines, it will provide a much more convenient work environment by creating a one stop machine. All your work can be done in one station, allowing for less time going back and forth. Stop wasting your precise time and renovate your office into the picture-perfect work station.

On Sale Now for Only: $125.00
With Free Shipping

Limited space but still want to be productive? The Rhin-O-Tuff Palm Switch can enhance and convert your workstation into the most effective environment it possibly can. Design to bolt securely onto the front of the punch machine, the palm switch can be easily adapt and become an efficient part of your everyday life. The palm switch is simple to use and the perfect accessory for your commanding work load.

On Sale Now for Only: $135.00
With Free Shipping

The Renz TC20 Manual Thumb Cut Calendar Punch is designed to punch the cut out for binding calendars with calendar hangers. The TC20 punches a half moon hole that is 20mm in diameter.

On Sale Now for Only: $128.68
With Free Shipping

The OD-3500 combo binding station allows you to do three types of binding on one small footprint: plastic coil, double loop wire or plastic comb. Essentially, it allows the use of 3 binding machines in one small footprint. All HD and OD modules will mount on your OD series punch. The OD-3500 can be used along with the HD4270, OD4300, HD4470 and HD8370 or simply as a stand).

On Sale Now For Only: $195.00
With Free Shipping

GBC's die set cabinet is designed to protect and store your interchangeable die sets while not in use in your GBC punch. Protect your valuable investments from damage and part loss with this attractive punching accessory. Each cabinet holds (3) dies and can be conveniently stacked to save space and hold multiple dies. The GBC Interchangeable Die Set Cabinet is specifically designed to work with dies for both the GBC Magnapunch / Ibico 660ID and the GBC MP2500ix / Ibico 640ID.

On Sale Now for Only: $207.00
With Free Shipping

This Rhin-O-Tuff Attachable Die Rack for the HD6500 or HD7000 is designed to help you conveniently store your diesets where they are readily accessible. The Die rack attaches directly onto the Rhino HD6500 or HD7000 and holds up to four dies.

On Sale Now For Only: $275.00
With Free Shipping

These specially designed die racks are designed to hold the Rhino Dies for your punches. The 4 space die rack holds dies from both HD and OD systems. The 8 space die rack holds dies from HD systems only.

On Sale Now For Only: $295.00
With Free Shipping

The Rhin-O-Tuff Pal-M Piks-A-Lift Manual Paper Picker is designed to help improve productivity by helping you to consistenly grab the right amount of paper every time. The Pal-M can be used with paper as small as 5.5" x 5.5" or as large as legal size. It can even be used with sheets that have index tabs. This machine is designed to be placed on top of your Rhin-O-Tuff punch (it fits on any vertical OD or HD series punch).

On Sale Now for Only: $855.00
With Free Shipping

Rhin-O-Tuff Onyx Pal-M is designed to create an easier process of work flow. This module is capable to work with 5.5" x 5.5" to 8.5" x 14" documents, providing a more efficient office environment without having the trouble of switching machines. The Onyx Pal-M can be combined with the APES machines, making the premium productive work station.

On Sale Now for Only: $855.00
With Free Shipping

This Renz SRW 360 modular motor and foot pedal combination are all you need in order to upgrade your Renz SRW 360 from a manual 3:1 pitch wire binding machine into an electric wire binding machine. You simply install this motor onto the back of your unit and your machine will be transformed. This give you the ability to begin with a manual binding machine and to upgrade as your volume increases. No other 3:1 pitch wire binding machine gives you this ability. Using this Modular Drive Motor you can quickly and easily turn your Renz SRW 360 into an SRW 360 Comfort. Imagine the possibilities.

On Sale Now for Only: $1666.95
With Free Shipping

This Renz ECO S 360 modular motor and foot pedal combination are all you need in order to upgrade your Renz ECO S 360 from a manual 3:1 pitch wire binding machine into an electric wire binding machine. You simply install this motor onto the back of your unit and your machine will be transformed. This give you the ability to begin with a manual binding machine and to upgrade as your volume increases. No other 3:1 pitch wire binding machine gives you this ability. Using this Modular Drive Motor you can quickly and easily turn your Renz ECO S 360 into an ECO S 360 Comfort. Imagine the possibilities.

On Sale Now for Only: $1666.95
With Free Shipping

This modular motor for the Renz SPB 360 is designed to give you the ability to upgrade your SPB 360 spiral coil binding machine from a manual binding punch to an electric one. This high quality punching motor can easily be attached to the back of your machine allowing you to increase productivity and save both time and money. Smaller organizations can start with the manual SPB 360 and as their needs increase they can upgrade thier machine to an electric punch. Plus, the SPB 360 includes a high quality coil inserter and crimping tool that is built right into the machine. Check it out for yourself.

On Sale Now for Only: $1781.00
With Free Shipping

Just add it to your existing Rhin-O-Tuff punching system. Exciting! Revolutionary! Innovative! Terms that are once again being used to describe a new Rhin-O-Tuff product. Attachable to any OD Series or HD Series Rhin-O-Tuff punch, the Piks-A-Lift will forever change the way your customers look at our competitors automatic punching systems.

On Sale Now for Only: $2295.00
With Free Shipping

Sick and tired going to machine to machine? No worries, the Rhin-O-Tuff Onyx PAL-14 is an electric paper separator that can handle documents from 8.5" x 5.5" to 8.5" - 14". It features a flexible paper lift thickness creating a more consistent pattern, providing a more efficient process. The PAL-14 is designed to handle index tabs, clear covers, over-sided covers and all basic documents.

On Sale Now for Only: $2295.00
With Free Shipping

Make your Rhin-O-Tuff HD Punch twice as productive by getting the new Rhin-O-Tuff APES-14. APES stands for Automatic Paper Ejector & Stacker module. It punches, ejects and stacks in one continuous operation. The Rhin-O-Tuff APES-14 easily attaches to your HD 6500 or HD 7000 and handles paper sizes from 5½" X 5½" up to 14" X 14" (140 X 140mm to 356 X 356mm).

On Sale Now for Only: $3225.00
With Free Shipping

Looking for the upgrade that will elevate your office efficiency to the full potential? Look no further than the Rhin-O-Tuff Onyx APES-14, automatic paper ejector and stack by Rhin-O-Tuff. Design for the HD7000 punch machine, it is capable to handle documents as small as 5.5" x 5.5" to 14" x 14". By combining and using the APES-14, productivity can be increase up to 50% and also extend the functionality life span of your existing HD7000 machines.

On Sale Now for Only: $3225.00
With Free Shipping

Make your Rhin-O-Tuff HD Punch twice as productive by getting the new APES-14-77. APES stands for Automatic Paper Ejector & Stacker module. It punches, ejects and stacks in one continuous operation. The Rhin-O-Tuff APES-14-77 easily attaches to your HD 7700 and handles paper sizes from 5½" X 5½" up to 14" X 14" (140 X 140mm to 356 X 356mm).

On Sale Now for Only: $3225.00
With Free Shipping

Maximize your Rhin-O-Tuff Onyx HD7700 punch machine with the Onyx Rhin-O-Tuff Onyx APES-14-77 automatic paper ejector and stacker. It is capable to work with a wide range of document sizes, from 5.5" x 5.5" to 14" x 14". Cover stock? No problem, it can also process tabs without any issues. The APES-14-77 can provide 50% more productivity and also extend the life span of your existing HD7700.

On Sale Now for Only: $3225.00
With Free Shipping