Renz Binding Machines

The Renz ECO S Manual 2:1 Pitch Heavy Duty Manual Binding machine can punch up to 25 sheets per lift and has 26 fully disengageable punching pins. The Renz ECO S is capable of closing wire spines from 1/4" to 1-1/4" and has adjustable depth of punch control.

On Sale Now for Only: $1020.00

The Renz ERW Heavy Duty Electric 3:1 Twin Loop Wire Binding Machine is designed for high volume users looking to do wire binding. The Renz ERW is capable of punching up to 25 sheets of paper, has 38 disengageable dies, adjustable punching pins and can bind documents from 1/4" up to 9/16" thick.

On Sale Now for Only: $4622.00

The Renz Combi Comfort Electric Comb Binding Machine includes a foot pedal controlled electric punch capable of punching up to 20 legal sized sheets per lift. The Renz Combi Comfort also includes fully disengageable dies, an adjustable depth of punch control and a heavy duty manual comb opener.

On Sale Now for Only: $2217.00

The Renz WBS 340 Comb Opener is designed to work in conjunction with the Renz DTP 340M modular binding system but can also be used as a stand alone unit. The WBS 340 Wire Closer has a built in wire hanger on the front and works with documents up 14" long and closes both 3:1 and 2:1 pitch wire. Please note that an optional module holding device must be purchased if the PBS 340 Comb opener is going to be used as a stand alone device.

On Sale Now for Only: $496.00

Renz DTP 340M Modular Punch Die Sets

MyBinding.com carries the full line of Renz 340A Modular Punch Die Sets. With 15 different punching patterns to choose from you can use your Renz Modular Punch to bind almost any type of document. Just insert the new dieset and you are ready to go.

Starting at Only: $945.00

The Renz SRW 360 is one of the newest additions to the Renz line of binding machines. This SRW 360 is a manual 3:1 pitch legal sized twin loop wire binding machine that can be upgraded to an electric machine with the simple addition of a modular electric punching motor. The SRW360 is the only machine of its kind that allows for this type of upgrade. This makes it possible for growing organziations to upgrade their existing machine without the need to buy a whole new system if their volume of document finishing increases.

On Sale Now for Only: $1193.00

This Renz SRW 360 modular motor and foot pedal combination are all you need in order to upgrade your Renz SRW 360 from a manual 3:1 pitch wire binding machine into an electric wire binding machine. You simply install this motor onto the back of your unit and your machine will be transformed. This give you the ability to begin with a manual binding machine and to upgrade as your volume increases. No other 3:1 pitch wire binding machine gives you this ability. Using this Modular Drive Motor you can quickly and easily turn your Renz SRW 360 into an SRW 360 Comfort. Imagine the possibilities.

On Sale Now for Only: $1781.00

The Renz SRW 360 Comfort is one of the newest additions to the Renz line of binding machines and is part of a new generation of binding machines from one of the highest quality binding equipment manufacturers on the planet. This SRW 360 Comfort is a electric 3:1 pitch legal sized twin loop wire binding machine with a heavy duty punching mechanism, a high quality wire closer and a convenient wire hanging system. The SRW360 Comfort allows you to increase your productivity allowing your employees to focus on other important tasks within your organization. The SRW-360 Comfort is designed to provide an efficient workflow and offers a compact design and durable construction.

On Sale Now for Only: $2771.00

The Renz ECO S 360 Wire Binding Machine is one of the newest additions to the Renz line of binding machines and is part of their new 360 line of binding equipment. This ECO-S 360 is a manual 2:1 pitch legal sized twin loop wire binding machine that can be upgraded to an electric machine with the simple addition of an electric modular drive motor. The ECO S360 is the only machine of its kind that allows for this type of upgrade. This makes it possible for growing organziations to upgrade their existing machine without the need to buy a whole new system if their volume of document finishing increases. The ECO-S 360 is designed to provide an efficient workflow and offers a compact design and durable construction. It includes a high quality fully adjustable manual wire closer and features fully disengageable punching pins to allow for binding any size of book up to fourteen inches in length.

On Sale Now for Only: $1193.00

This Renz ECO S 360 modular motor and foot pedal combination are all you need in order to upgrade your Renz ECO S 360 from a manual 3:1 pitch wire binding machine into an electric wire binding machine. You simply install this motor onto the back of your unit and your machine will be transformed. This give you the ability to begin with a manual binding machine and to upgrade as your volume increases. No other 3:1 pitch wire binding machine gives you this ability. Using this Modular Drive Motor you can quickly and easily turn your Renz ECO S 360 into an ECO S 360 Comfort. Imagine the possibilities.

On Sale Now for Only: $1781.00

The Renz ECO 360 Comfort Wire Binding Machine is one of the newest additions to the Renz line of binding machines and is part of a new generation of binding machines from one of the highest quality binding equipment manufacturers on the planet. This ECO 360 Comfort is a electric 2:1 pitch legal sized twin loop wire binding machine with a heavy duty punching mechanism, a high quality wire closer and a convenient wire hanging system. Plus this machine features the Renz One Pitch system which means that it is capable of binding both large and small books using 2:1 pitch wires that are between 1/4" and 1-1/2" in diameter. The ECO 360 Comfort allows you to increase your productivity allowing your employees to focus on other important tasks within your organization.

On Sale Now for Only: $2771.00

This modular motor for the Renz SPB 360 is designed to give you the ability to upgrade your SPB 360 spiral coil binding machine from a manual binding punch to an electric one. This high quality punching motor can easily be attached to the back of your machine allowing you to increase productivity and save both time and money. Smaller organizations can start with the manual SPB 360 and as their needs increase they can upgrade thier machine to an electric punch. Plus, the SPB 360 includes a high quality coil inserter and crimping tool that is built right into the machine. Check it out for yourself.

On Sale Now for Only: $1781.00

The Renz ECL 360 Electric Ring Wire closer is a heavy duty electric wire closing machine that is designed for finishing books up to fourteen inches in length. This wire closing machine is designed for use with all different pitches of ring wire, wire-o, twin loop and spiral-o binding spines. This wire closer is capable of handling all of the different diameters of wire that are available on the market. In fact, it can handle wires that are as small as 3/16" and as large as 1-1/2" in diameter. Using this machine is it is possible to dramatically increase your wire binding productivity when closing wire spines with or without calendar hangers. Check out the Renz ECL 360 today.

On Sale Now for Only: $4313.00

The Renz ECL 500 Electric Ring Wire closer is a heavy duty electric wire closing machine that is designed for finishing books up to nineteen inches in length. This wire closing machine is designed for use with all different pitches of ring wire, wire-o, twin loop and spiral-o binding spines. The Renz ECL 500 is capable of handling all of the different diameters of wire that are available on the market. In fact, it can handle wires that are as small as 3/16" and as large as 1 1/2" in diameter. Using this machine is it is possible to dramatically increase your wire binding productivity when closing wire spines with or without calendar hangers. Check out the Renz ECL500 today.

On Sale Now for Only: $5167.00

The Renz ECL 700 Electric Ring Wire closer is a heavy duty closing machine that is designed for finishing wire bound books up to 27.6 inches in length. This closing device is designed for use with all different pitches of ring wire, wire-o, wireo, twin loop, wirebind and spiral-o binding spines. The ECL 700 is capable of handling all of the different diameters of wire that are available on the market. In fact, the ECL-700 can handle spines that are as small as 3/16" and as large as 1 1/2" in diameter. Using this machine is it is possible to dramatically increase your wire binding productivity when closing wire spines with or without calendar hangers. Check out the Renz ECL700 today.

On Sale Now for Only: $6398.00

This Renz Wire Clamp for the ECL 360 is designed to magnetically attach to the ECL 360 to help you hold your wire elements for quick inserting before you close your wire bound documents. Also known as the "clampy" this special wire clamp is fourteen inches in width and is simple to use. Check out the Renz Wire Clamp for the ECL 360 today.

On Sale Now for Only: $165.00

This Renz Wire Clamp for the ECL 500 convenient wire clamp is designed to magnetically attach to the ECL 500 to help you hold your wire elements for quick inserting before you close your wire bound documents. Also known as the "clampy" this special wire clamp is fourteen inches in width and is simple to use. Check out the Renz Wire Clamp for the ECL 500 today.

On Sale Now for Only: $198.00

The Renz WBS340 wire closer, CBS340 coil inserter and PBS340 comb opener are designed to conveniently hang on the front of your DTP modular binding punch. However, if you want to use these modules as a stand alone device or if you don't have a DTP punch then you will need a special module holder to hold the module in place while you use it. This special metal stand is made of heavy duty metal and is sturdy enough to hold the piece of finishing equipment in place while you use it.

On Sale Now for Only: $60.00

Using the Renz WP300 electric ring wire dispenser you can automatically remove wire comb binding elements from Renz WirePack packaging. They are delivered directly into the wire holding mechanism for quick and easy loading of pre-punched documents into the wire. Using this machine it is possible to increase binding speeds by up to three times by eliminating awkward wire handling. The WP300 can be attached to the Renz ELC360 electric closing machine to produce a high performance binding center.

On Sale Now for Only: $4730.00

The Renz P500e is a heavy duty modular binding punch that is capable of using either 14" or 20" heavy duty punching dies. This makes this machine incredibly versatile for users who are looking to bind all different types of documents including calendars, music scores, blueprints, plans as well as standard presentations, proposals and reports. the Renz 500e offers fast die changeover with the ability to switch punching patterns in about two minutes. It provides the ability to use special two part punching dies that allow for binding documents using a thumb cut pattern.

On Sale Now for Only: $9666.00

The Renz logistic desk is specifically designed for use with the P 500e modular binding punch. It provides the support that is needed for the P500e and offers left and righ work platforms. Combining this logistics desk with your Renz 500e 20" modular binding punch will give you the added productivity that your organization needs to grow.

On Sale Now for Only: $2688.00

The Renz Floor Stand is designed for user who owns the Renz P 500E modular binding punch or are considering purchasing one, you probably know just how heavy that machine is. The 500e weighs in at over three hundred pounds and is thus too heavy for most standard tables or work benches. This high quality metal stand is specifically designed for use with the Renz P 500e. this floor stand provides the strength and stability that you need to protect your equipment and your users. Check it out for yourself today.

On Sale Now for Only: $637.00