Titan Wire 2:1 Heavy Duty Wire Binding Machine

Our Price:

Availability:
Product Number:
Product Weight:
Manufacturer:

$559.00

In Stock
DFGTitanWireL
30 lbs
DFG

QTY:

Product
Details

Product Review

Titan Wire L 2:1 Pitch Heavy Duty Wire Binding Machine

DFG’s TitanWire is a wire binding machine for 2:1 pitch wire binding, normally used for book thickness up to 1-1/4”. DFG’s TitanWire machine can manually punch 1-25 sheets (20#). All TitanWire punch pins are heat-treated and precision ground to tight tolerance. The TitanWire also features a fully enclosed, high efficiency lubricated punch tool design. Result is the ultra long punch tool life and great punch capacity. DFG’s TitanWire has the best wire closer design on the market. It features two tapered steel closing blocks with CloseAssist ™ finish, made in a precision-controlled environment. This design assures long-lasting quality of wire closing, especially compared to competing machines' sandpaper or fabric covered sheet metal closer. Two adjustment knobs are standard, to assure even and accurate closing. This is VITAL to consistent closure of elements, no matter whose wire you use.

Buy the Titan Wire Binding Machine and get $50 in free supplies!!! Don't be fooled by our competitors who claim you get $30 in supplies with this machine but then make you pay freight on the supplies. With us you get to pick the supplies that you want and need. Plus, you get free shipping on the supplies and the machine. You can pick your supplies when you order the machine or we can send you a coupon to use on a future order. You pick.

Titan Wire Binding Machine Specifications

Model: TitanWire
Description: Heavy Duty Wire Manual Punch and Manual Binding Machine
Structure: Solid all metal construction
Hole Pattern: 2:1 pitch. Rectangular holes
Punching Capacity:1-25 (20#) sheets per punch. Fully enclosed, lubricated punch tool system for ultra long punch tool life and good punching capacity
Disengageable Pins: Full for completely clean punching with any paper
Wire Closing Capacity: 3/16" to 1 1/4". Two tapered steel blocks with CloseAssist ™ finish with dual closure adjustment for long lasting accurate binding
Punch Length: Any with full disengagement-pin, open throat design, and easy punch support
Side Margin Control: Center holes quickly and easily
Wire Size Selector: Built-in indicator shows suggested wire size
Adjustable Punching Margin: Helps to improve all book’s strength and design
Warranty: One year
Safety: America safety agency ETL listed

If you have any questions about the TitanWire L, any of the Coil Binding Machines, Wire Binding Machines, Comb Binding Machines, Binding Supplies or Binding Covers that we carry please feel free to call us toll free at 1-800-944-4573 or email us at sales@mybinding.com

Product Review

DFG TitanWire-L 2:1 Pitch Double Loop Wire Binding Machine Product Review

Overview:

The TitanWire-L is a high quality, heavy duty 2:1 pitch wire binding system produced by the Document Finishing Group (DFG). Although the Document Finishing Group is a relatively new player in the binding industry, they have managed to produce a line of equipment that is both durable and versatile.
This machine is no exception. It boasts heavy duty metal components, and an excellent set of features and a great design. All things that are essential for meeting the needs of small and medium sized organizations that are looking for a twin loop wire binding machine.

Features/ Strengths:

One of the most impressive things about the DFG TitanWire-L is its punching capacity. This machine can punch up to twenty five sheets per lift. For a manual punch, that is actually quite incredible. Most other similar punches on the market are only capable of punching up to about twenty sheets at a time. This means that the TitanWire-L offers as much as a 25% better punching capacity than its competition.
The TitanWireL is designed to punch a 2:1 pitch hole pattern. This means that it punches two holes per inch. Generally, a 2:1 pitch wire binding machine would be used for binding documents between 5/8” and 1-1/4” thick. However, this machine is also compatible with special small sized 2:1 pitch wire elements. This means that you can use it to bind documents from 1/4" up to 1-1/4” in diameter. Small sized 2:1 pitch spines cost a little bit more than standard 3:1 pitch spines. However, it is really nice to have the flexibility to bind both large and small documents.
The TitanWire-L is constructed almost completely of metal. The punching mechanism, punching pins, document table, the handles and the wire closer are all made of heavy duty steel or other metal alloys. All of these components have been tested extensively and are designed for years of daily usage without the need for repair or maintenance.
The wire closing device included on the Titan-Wire L is both durable and solid. It has uses two large adjustment knobs that allow you to set the closer to close your spines with precision. This is the same type of adjustment mechanism that is used on high end manual stand alone wire closers from GBC and Rhin-O-Tuff. Plus, the closer also uses two high quality steel closing blocks that won’t shift, bend, warp or become less accurate over time.
The Titan-Wire L also includes a number of other excellent features such as: fully disengageable punching pins, a depth of punch margin control, a continuous punching guide, a spine measuring device and an extra large chip tray.

Limitations/Weaknesses:

It is hard to believe that in the design of this machine that DFG forgot to include a wire holder or a wire hanger. When binding documents, a wire holder or hanger is designed to keep the wire spine in place while you add your pages onto the loops. The fact that the TitanWireL doesn’t include a wire hanger means that users will need to hold the wire with one hand while they try to add the pages with another. That takes a lot of co-ordination and will really cut into the productivity of this machine.
Another thing that is important to note about this machine is that it only has an eleven inch punching throat and an eleven inch wire closer. This makes it ideal for binding letter sized and smaller documents. However, companies that ocassionally need to bind A4 or legal sized documents will struggle with this machine. These organizations may want to consider one of the Akiles Wiremac binding machines as an alternative to this system.
Another potential weakness that should be noted is the placement of the wire closer on the TitanWire series of binding machines. The closer is located on top of the machine which requires users to lift their document with the wire up and place it into the closer. It can often be difficult to do this without the loop of wire coming out of the holes on the document. As a general rule, the shorter the distance you need to move the wire the easier it will be.

Recommendation:

The TItanWire-L is one of the best built 2:1 pitch twin loop wire binding machines that I have seen. The construction is excellent, it uses heavy duty metal components and has an excellent punching capacity.
However, the fact that it does not include a wire hanger or holder and only offers an eleven inch punching throat is less than ideal.
Organizations that need to bind legal sized documents or who are looking for a high productivity machine will most likely need to look to the Akiles line of wire binding equipment.