MHL Lustre UV 5mil 61" x 250' Low Temp Laminating Film

Our Price:

Availability:
Product Number:
Product Weight:
Manufacturer:

$487.69

In Stock
MLD61205
45 lbs
Drytac

QTY:

BUY MORE

SAVE MORE

Buy 2 or more Save 3%
Buy 5 or more Save 5%
Buy 10 or more Save 10%

Product
Details

MHL Lustre UV 5mil 61" x 250' Low Temperature Laminating Film

MHL Lustre UV is a low temperature, low gloss overlaminating film that is designed to reduce glare and reflection. MHL Lustre is recommended for images viewed under direct lighting conditions. Low sheen with minimal loss of contrast of sharpness makes MHL Lustre UV particularly desirable. Its many uses include POP displays, courtroom presentations, etc. This thicker version of MHL Lustre adds more rigidity to your prints while offering the same luster finish that reduces glare and reflection.

Technical Specifications

Film Width: 61"
Film Length: 250'
Film Thickness: 5.0mil
Core Size: 3"
Finish: Luster
Base Film: 2.0mil (50 micron) polyester
Adhesive: 3.0 mil (75 micron) co-extruded polyethylene copolymer
Initial Tack: None
Application Speed: 1' - 8' per minute
Application Temperature: 200 F - 230 F
Release Liner: None

MHL Thermal Overlaminating Film Tips and Details

MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are available in a variety of thicknesses and finishes from standard gloss and lustre finishes to scratch-resistant films suitable for outdoor applications. All MHL films are suitable for both single sided and double sided laminating (encapsulation) of photographic, electrostatic, inkjet-bond, xerographic and lithographic output, as well as many more applications. These films also incorporate UV absorbers for excellent protection from damaging UV rays.

Tips For Applying MHL UV Thermal Films:

Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down.
Use your idler bar to increase the area of contact between the heated rollers and the film.
To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results.
MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.