Protac Rigid UPVC 16mil 51" x 164' Pressure Sensitive White Backing
Protac Rigid (UPVC) White Backing is an opaque white rigid vinyl film coated with an aggressive cross-linking, pressure sensitive, solvent acrylic adhesive that deters tunneling. Protac Rigid White Backing is ideal for backing all types of prints but is ideally suited for application to the back of reverse print polycarbonate inkjet media. The combination of these two products will produce a rigid, yet rollable display that can stand up to the most demanding display conditions.
Technical Specifications |
- Film Width: 51"
- Film Length: 164'
- Film Thickness: 16.0mil
- Core Size: 3"
- Finish: Opaque White
- Base Film: 14.0mil (350 micron) rigid vinyl (UPVC)
- Adhesive: 2.0mil (50 micron) solvent acrylic
- Initial Tack: High
- Application Speed: 1' - 6' per minute
- Application Temperature: Room Temperature - 120 F
- % of Light Transmission: 0.10% (1/10%)
- Release Liner: Polyester
|
Backing films & Materials Overview and Tips |
A quality image deserve the very best "support". With this in mind, there are a number of backing films and materials available on the market to help give your documents, prints, maps and signs the support and rigidity that they need and deserve. Choose from pressure sensitive Protac backing films, thermal MHL films and heatset MediaShield backing films. We carry everything from heavy-duty materials for extra rigidity to specialty linen cloth backers. When choosing a backing material, consider the following criteria: -
Thickness: Determine the maximum total graphic thickness the display hardware or graphic holder can accept. -
Rigidity: this attribute is determined not only by the thickness but also the type of base material. For example, a 10.0 mil polycarbonate will be more rigid than a 10.0 mil PVC (vinyl). This is especially important when graphics will be rolled for transport -
Weight: This factor is related to the first two criteria, but is not the same. Some materials may be the correct thickness and stiffness, yet are not suitable because they are too heavy. Excess weight especially affects performance and stability of graphics on banner stands or pop-up booths. -
Color: A backing material is usually visible only from the back of the graphic. However, black or white borders can be created by encapsulating an image with a specialized backing material and trimming it accordingly. -
Adhesive: It is important to consider the type of adhesive component when choosing a backing material. For example: HeatSet (heat-activated) adhesives cure very quickly, enabling you to roll images immediately, while pressure sensitive adhesive have a longer curing time during which graphics should be stored flat. Also, some aqueous based adhesives may not be suitable for outdoor use. -
Opacity: For graphics installed against a metal frame (pop up booth) choose higher opacity backing materials to eliminate show through. |
1800 NE 25th Avenue - Suite 15