0
Promotions & Deals
Contract Holder Contract # GS-03F-053AA
Need Help 1-800-944-4573 1-800-944-4573
Banner Bug Retractable Banner Stand - Silver (Single-Sided)
$135.00

Banner Bug Retractable Banner Stand - Silver (Single-Sided)

Banner Bug Retractable Banner Stand - Silver (Single-Sided) Image 1

Banner Bug Retractable Banner Stand - Silver (Single-Sided)

Brand: Drytac
1 Questions, 1 Answers
Starting At

Was: $175.00

Your Price: $135.00

You Save: 23%

Brand New Price Match Guarantee In Stock Ships Free Over $75
Choose Sizes Below

AdditionalOptions

ProductItem NumberPriceQty
Banner Bug 8.69" x 20" Desk Bug Retractable Banner Stand - Silver (Single-Sided)Item Number : DUD1022Price :

Was: $175.00

Your Price: $135.00

You Save: 23%

Qty :
Banner Bug 15.75" x 35.5" Mini Bug Retractable Banner Stand - Silver (Single-Sided)Item Number : DU1040Price :

Was: $230.13

Your Price: $177.53

You Save: 23%

Qty :
Banner Bug 22.81" x 59.81" Retractable Banner Stand - Silver (Single-Sided)Item Number : DU1058Price :

Was: $281.67

Your Price: $217.29

You Save: 23%

Qty :
Banner Bug 33.44" x 85.375" Retractable Banner Stand - Silver (Single-Sided)Item Number : DU1085Price :

Was: $308.33

Your Price: $237.86

You Save: 23%

Qty :
Banner Bug 39.375" x 85.375" Retractable Banner Stand - Silver (Single-Sided)Item Number : DU1100Price :

Was: $380.00

Your Price: $293.14

You Save: 23%

Qty :
Banner Bug 39.375" x 114" Giant Bug Retractable Banner Stand - Silver (Single-Sided)Item Number : DUG1100Price :

Was: $458.33

Your Price: $353.57

You Save: 23%

Qty :
Banner Bug 47.25" x 85.375" Retractable Banner Stand - Silver (Single-Sided)Item Number : DU1120Price :

Was: $415.00

Your Price: $320.14

You Save: 23%

Qty :
Banner Bug 59.06" x 85.375" Retractable Banner Stand - Silver (Single-Sided)Item Number : DU1150Price :

Was: $598.33

Your Price: $461.57

You Save: 23%

Qty :
Banner Bug 70.75" x 85.375" Retractable Banner Stand - Silver (Single-Sided with 2 Poles)Item Number : DU1183Price :

Was: $878.60

Your Price: $677.77

You Save: 23%

Qty :
Banner Bug 94.5" x 85.375" Retractable Banner Stand - Silver (Single-Sided with 3 Poles)Item Number : DU1244Price :

Was: $1,079.17

Your Price: $832.50

You Save: 23%

Qty :
Banner Bug 114" x 85.375" Retractable Banner Stand - Silver (Single-Sided with 3 Poles)Item Number : DU1305Price :

Was: $1,180.67

Your Price: $910.80

You Save: 23%

Qty :

ProductDescription

This Banner Bug Retractable Banner Stand is a stylish, sleek, modern pole retractable banner stand that is both compact and durable. Banner Bug Retractable Banner Stand is easy and fast to set-up, rolls up in seconds, and when the time comes for new graphics, they're quick and easy to change. This Banner Bug Retractable Banner Stand has a silver colored base with a black end cap, and comes with a nylon carrying bag. Get your business noticed with this Banner Bug Retractable Banner Stand.

Product Details

  • Color: Silver with Black End Caps
  • No of Poles: 1, 2 or 3 depending on size
  • Includes: Nylon Carrying Case (Black)
  • Top Bleed: 1.19" (30mm)
  • Bottom Bleed: 7.875" (200mm)
  • Recommended Applications: Trade shows, Public events, Retail applications, Point of Purchase (POP), Hospitality environments, Conventions, Meetings, Casinos, Sports Venues

ItemSpecifications

Part NumberSizeGraphic Panel SizeVisible Graphic AreaNo of Poles
     
DU105822.81" x 59.81"22.81" x 68.875"22.81" x 59.81"1
     
DU108533.44" x 85.375"33.44” x 94.5”33.44” x 85.375”1
     
DU110039.375" x 85.375"39.375” x 94.5”39.375” x 85.375”1
     
DU112047.25" x 85.375"47.25” x 94.5”47.25” x 85.375”1
     
DU115059.06" x 85.375"59.06” x 94.5”59.06” x 85.375”1
     
DU118370.75" x 85.375"70.75” x 94.5”70.75” x 85.375”2
     
DU124494.5" x 85.375"94.5” x 94.5”94.5” x 85.375”3
     
DU1305114" x 85.375"114” x 94.5”114” x 85.375”3
     

ProductReviews

There are No Reviews on this Product Yet

Be the first to review this product

  • 1 star
    1 star
    1 star
    1 star
    1 star

DemonstrationVideo

Drytac Banner Bug Graphic Attachment Demo Video

Transcript: Drytac Banner Bug Graphic Attachment Demonstration

BannerBug Graphic Attachment
Remove yellow release tape from the grey plastic header strip
Place on back of panel at the very top
Fold panel back over
Take header rail and slide onto panel
Note the position of the panel - the black clip should be facing up
Fit end cap and repeat the other end
Turn the frame upside down so that the yellow tape on the lead sheet faces down onto the base of the panel
While holding the lead sheet remove the yellow release tape to mount the panel.
Press down firmly
Turn the frame over onto i...
Read More
Drytac Banner Bug Graphic Attachment Demonstration
  • BannerBug Graphic Attachment
  • Remove yellow release tape from the grey plastic header strip
  • Place on back of panel at the very top
  • Fold panel back over
  • Take header rail and slide onto panel
  • Note the position of the panel - the black clip should be facing up
  • Fit end cap and repeat the other end
  • Turn the frame upside down so that the yellow tape on the lead sheet faces down onto the base of the panel
  • While holding the lead sheet remove the yellow release tape to mount the panel.
  • Press down firmly
  • Turn the frame over onto its base
  • While holding the panel firmly, remove the spring locking pin
  • Slowly allow the panel to roll into the frame
  • Do not let go - guide it gently all the way in
  • The system is ready to use
  • Any difficulties please call your supplier

Drytac Banner Bug Graphics Stand Double Retensioning Demo Video

Transcript: Re-tensioning BannerBug Double

1. On the end with two half plates, remove right plate leaving left plate in position
2. Remove spring shaft from frame
3. Spin around and remove the full end plate and the second spring shaft
4. With that side open, replace the spring into the frame. Keep the flat bar of the shaft closest to you
5. Locate full end plate onto the flat bar and push shaft into frame
6. Locate round spring shaft into end plate at other end
7. Align hole in spring shaft with the hole in the end plate and place key into both holes to lock the spring mechanism
8. Return to th...
Read More

Re-tensioning BannerBug Double

1. On the end with two half plates, remove right plate leaving left plate in position 2. Remove spring shaft from frame 3. Spin around and remove the full end plate and the second spring shaft 4. With that side open, replace the spring into the frame. Keep the flat bar of the shaft closest to you 5. Locate full end plate onto the flat bar and push shaft into frame 6. Locate round spring shaft into end plate at other end 7. Align hole in spring shaft with the hole in the end plate and place key into both holes to lock the spring mechanism 8. Return to the tension end and using grips, lock the flat end of the spring shaft 9. Holding the grips turn clockwise to tension spring mechanism  
  • DeskBug              25turns
  • 580/22”                18turns
  • 850/33”                25turns
  • 1000/39”              28turns
  • 1200/47”              32 turns
  • 1500/59”              34 turns
  • 1800/72”              36 turns
  • Giant Bug            32 turns
  10. Replace all screws 11. Return to the end with one half plate in place 12. Place 2nd roller into the open side and locate spring shaft 13. On the underside remove the extension screw from the foamholder 14. Place into threaded shaft 15. Locate key into plate and roller top lock the spring shaft 16. Locate the remaining plate onto the shaft flat bar and using grips apply tension to the spring shaft 17. Replace remaining screws 18. Remove extension screw and return it to the foam holder

Drytac Banner Bug Single Retensioning Demo Video

Transcript: Here is a transcript of this video:

Retensioning BannerBug Single
1. Remove all the screw from right side of frame
2. Remove spring shaft from frame
3. Replace spring shaft with the lead sheet protruding from the front of the frame
4. Fit end plate onto the shaft
5. On the opposite side locate the end of the spring shaft in the round hole of the end plate
6. Align hole in the spring shaft with the hole in the end plate and place the Allen key into both hole to lock the spring mechanism
7. Return to the tensioning end and using grips or pliers, lock the flat end of the spring shaft
8...
Read More
Here is a transcript of this video:

Retensioning BannerBug Single

1. Remove all the screw from right side of frame 2. Remove spring shaft from frame 3. Replace spring shaft with the lead sheet protruding from the front of the frame 4. Fit end plate onto the shaft 5. On the opposite side locate the end of the spring shaft in the round hole of the end plate 6. Align hole in the spring shaft with the hole in the end plate and place the Allen key into both hole to lock the spring mechanism 7. Return to the tensioning end and using grips or pliers, lock the flat end of the spring shaft 8. Holding the grips, turn clockwise to tension the spring shaft
  • DeskBug              25turns
  • 580/22”                18turns
  • 850/33”                25turns
  • 1000/39”              28turns
  • 1200/47”              32 turns
  • 1500/59”              32 turns
  • 1800/72”              32 turns
  • Giant Bug            32 turns
9. When placing the screw the long screw must go in the bottom middle 10. Replace all screws
Questions & Answers
Q:
Do you print and sell the banner graphics for the Mini Bug Retractable? 15.75" x 35.5" If not where do I find them?
Asked by Terry Hull 3 months ago
A:
Thank you for your question. I contacted DryTac the manufacturer of the Banner Bug Retractable Banner Stand and unfortunately they do not make the banners that go with this stand. We do have relationships with a large variety of vendors that make a wide assortment of custom items. Please give our customer service department a call at 1-800-944-4573 with the specifics of what you are looking for and we can see what we can work out for you.

Answered by MyBinding 3 months ago
* Nickname:

* Your Answer:


Sign Up for Newsletter

Submit a New Question

Submit