Centurion 4' x 16' Premium Magnetic Porcelain Aluminum Frame Whiteboard with Maprail
936.50 NewCondition OutOfStock

We're sorry, but we no longer offer this item.

We do not currently have any alternative products to offer. We apologize for the inconvenience.

Centurion 4' x 16' Premium Magnetic Porcelain Aluminum Frame Whiteboard with Maprail

Part #: A2M416-M
Brand: Ghent
  • Size: 4' x 16'
  • Surface Material: Porcelain Steel
  • Frame Material: Aluminum
  • Magnetic: Yes
Additional Sizes Below
We're here for you!
Please call 1-800-944-4573 for help finding a comparable solution, or
Click to Chat

SWIPE FOR MORE IMAGES
  • 0
  • 1
  • 2
  • 3
video

Product Description

Unsurpassed performance and durability with this Centurion 4' x 16' Premium Magnetic Porcelain Aluminum Frame Whiteboard with Maprail . Centurion porcelain-on-steel markerboards are the finest markerboards in the world. Specifically designed for everyday use. Its porcelain-on-steel surface is the hardest marker surface available and will resist scratching, denting or staining, Due to its steel substrate, Centurion markerboards accept magnetic accessories. Built to last, Centurion markerboards, with their 50-year guarantee, are the best value when measured over their years of dependable service. This Centurion 4' x 16' Premium Aluminum Magnetic Markerboard comes complete with a full length maker tray.
This item is oversized, ships by truck and is not returnable. If any freight damage occurs please note clearly on the bill of lading at the time of delivery.

Product Details

  • Size:4' x 16'
  • Surface:Porcelain-on-steel
  • Surface Color:White
  • Frame Style:Aluminum
  • Features :1" Maprail, Full Length Marker Tray, Magnetic, Scratching, Denting, Staining Resistant
  • Part Number: A2M416-M
  • Warranty: 50-Year Manufacturer's Warranty

Demonstration Video

M1 - M2 - M3 Whiteboard Installation

Transcript: M1 – M2 – M3 Installation video
Aluminum & Wood Framed Whiteboard with Accessory Tray
10-50 Year Warranty
Made in the USA

Materials & Tools
All L hangers provided must be used for proper installation

Board Size – Number of L-Hangers & Screws Provided
2’ x 3’ - 4
3’ x 4’ - 4
4’ x 4’ - 4
4’ x 5’ - 4
4’ x 6’ - 4
4’ x 8’ - 6
4’ x 10’ - 8
4’ x 12’ - 10
4’ x 16’ - 12

Provided
6 – 12 L-Hangers depending on board size
Markers & eraser
6-14 #8 ½” Screws depending on board size
Accessory tray

Additional Materials Requir ...
Read More
M1 – M2 – M3 Installation video Aluminum & Wood Framed Whiteboard with Accessory Tray 10-50 Year Warranty Made in the USA
Materials & Tools All L hangers provided must be used for proper installation
Board Size – Number of L-Hangers & Screws Provided 2’ x 3’ - 4 3’ x 4’ - 4 4’ x 4’ - 4 4’ x 5’ - 4 4’ x 6’ - 4 4’ x 8’ - 6 4’ x 10’ - 8 4’ x 12’ - 10 4’ x 16’ - 12
Provided 6 – 12 L-Hangers depending on board size Markers & eraser 6-14 #8 ½” Screws depending on board size Accessory tray
Additional Materials Required Pencil Level Stud-finder Drill 1/8” Drill Bit #8 1 ¼” pan head Self-Tapping screws Wall anchors/Mollies (no studs) Philips Screw Driver Tape measure
Your Ghent Whiteboard is designed for mounting on most wall surfaces.
For the most secure mounting, screws should be fastened directly into at least two wall studs. Ghent recommends using #8 x 1-1/4” pan head type self-tapping screws.
When wall studs cannot be used, we recommend using expandable wall anchors.
It is also recommended that at least two people hang this board.
Remove Accessory Tray From Board Determine Height and Location of Board Level Board and Scribe Line Drill Holes Through Tray Using #8 1x1/2” Pan Head Screws Level Tray & Mark Holes Drill pilot Holes Use Mount Screws to Attach to Wall Place Board on Tray Place board at least 8” from edge (2’x3’ trays at least 6.5” from edge) Scribe line on top two corners & remove board Trace L-Hangers along scribed line (Use studs, if no studs present, use mollies (not provided)) Drill 1/8” pilot holes & secure with mounting screws (not provided) Place Board on Accessory Tray Tap L-Hangers Secure to Board and Trace Drill 1/8” pilot holes Place board on accessory tray Secure with provided #8 mounting screws Place Markers & eraser Place endcaps on tray

Questions & Answers

Submit a New Question