0
Promotions & Deals
Contract Holder Contract # GS-03F-053AA
Need Help 1-800-944-4573 1-800-944-4573
Cubify CubePro 3D Printer Cartridges - PLA
$99.00

Cubify CubePro 3D Printer Cartridges - PLA

Cubify CubePro 3D Printer Cartridges - PLA Colors

Cubify CubePro 3D Printer Cartridges - PLA

Brand: Cubify
0 Questions, Ask a Question
Starting At

Your Price: $99.00

Brand New Price Match Guarantee In Stock Ships Free Over $75
Choose Sizes Below

AdditionalOptions

ProductItem NumberPriceQty
Cubify CubePro 3D Printer Cartridge - PLA BlackItem Number : 3DS-401400-01Price :

Your Price: $99.00

Qty :
Cubify CubePro 3D Printer Cartridge - PLA BlueItem Number : 3DS-401399-01Price :

Your Price: $99.00

Qty :
Cubify CubePro 3D Printer Cartridge - PLA BronzeItem Number : 3DS-403062Price :

Your Price: $99.00

Qty :
Cubify CubePro 3D Printer Cartridge - PLA BrownItem Number : 3DS-401402-01Price :

Your Price: $99.00

Qty :
Cubify CubePro 3D Printer Cartridge - PLA CoralItem Number : 3DS-403045Price :

Your Price: $99.00

Qty :
Cubify CubePro 3D Printer Cartridge - PLA Dark GreyItem Number : 3DS-403047Price :

Your Price: $99.00

Qty :
Cubify CubePro 3D Printer Cartridge - PLA Forest GreenItem Number : 3DS-403043Price :

Your Price: $99.00

Qty :
Cubify CubePro 3D Printer Cartridge - PLA Glowing BlueItem Number : 3DS-401430-01Price :

Your Price: $99.00

Qty :
Cubify CubePro 3D Printer Cartridge - PLA Glowing GreenItem Number : 3DS-401429-01Price :

Your Price: $99.00

Qty :
Cubify CubePro 3D Printer Cartridge - PLA GoldItem Number : 3DS-403061Price :

Your Price: $99.00

Qty :
Cubify CubePro 3D Printer Cartridge - PLA GreenItem Number : 3DS-401398-01Price :

Your Price: $99.00

Qty :
Cubify CubePro 3D Printer Cartridge - PLA Industrial GreyItem Number : 3DS-401422-01Price :

Your Price: $99.00

Qty :
Cubify CubePro 3D Printer Cartridge - PLA MagentaItem Number : 3DS-401392-01Price :

Your Price: $99.00

Qty :
Cubify CubePro 3D Printer Cartridge - PLA NaturalItem Number : 3DS-401405-01Price :

Your Price: $99.00

Qty :
Cubify CubePro 3D Printer Cartridge - PLA Navy BlueItem Number : 3DS-403046Price :

Your Price: $99.00

Qty :
Cubify CubePro 3D Printer Cartridge - PLA Neon GreenItem Number : 3DS-401397-01Price :

Your Price: $99.00

Qty :
Cubify CubePro 3D Printer Cartridge - PLA Neon OrangeItem Number : 3DS-401394-01Price :

Your Price: $99.00

Qty :
Cubify CubePro 3D Printer Cartridge - PLA Pale YellowItem Number : 3DS-403044Price :

Your Price: $99.00

Qty :
Cubify CubePro 3D Printer Cartridge - PLA PurpleItem Number : 3DS-401403-01Price :

Your Price: $99.00

Qty :
Cubify CubePro 3D Printer Cartridge - PLA RedItem Number : 3DS-401393-01Price :

Your Price: $99.00

Qty :
Cubify CubePro 3D Printer Cartridge - PLA SilverItem Number : 3DS-401404-01Price :

Your Price: $99.00

Qty :
Cubify CubePro 3D Printer Cartridge - PLA TanItem Number : 3DS-401395-01Price :

Your Price: $99.00

Qty :
Cubify CubePro 3D Printer Cartridge - PLA TealItem Number : 3DS-401401-01Price :

Your Price: $99.00

Qty :
Cubify CubePro 3D Printer Cartridge - PLA WhiteItem Number : 3DS-401391-01Price :

Your Price: $99.00

Qty :
Cubify CubePro 3D Printer Cartridge - PLA YellowItem Number : 3DS-401396-01Price :

Your Price: $99.00

Qty :

ProductDescription

This Cubify CubePro 3D Printer Cartridges - PLA are designed to snap into the Cube for easy loading and switching. The smart cartridge provides information on material type, color and status. Moisture-lock construction protects your filament from water and environmental damage.

Product Details

  • Colors: Black, Blue, Bronze, Brown, Coral, Dark Grey, Forest Green, Glowing Blue, Glowing Green, Gold, Green, Industrial Grey, Magenta, Natural, Navy Blue, Neon Green, Neon Orange, Pale Yellow, Purple, Red, Silver, Tan, Teal, White and Yellow
  • Material Type: PLA (Polylactic Acid)
  • Outside Diameter: 1.75"
  • Compatible With: CubePro, Duo, and Trio 3D Printers
  • Product Number: 3DS-40-PLA

ProductReviews

There are No Reviews on this Product Yet

Be the first to review this product

  • 1 star
    1 star
    1 star
    1 star
    1 star

DemonstrationVideo

Transcript: Hi! I?m JD with 3D Systems. And today we?re going to show you how to install or replace a material cartridge on the CubePro. We?ll get started by replacing a cartridge to bay 1. To install a cartridge, simply go to your setup menu and press Replace on the touch screen and select what cartridge you want to replace. Just as a reminder, the one all by itself is bay 1. And here?s 2 and 3. The print head will now move to the back waste container and heat up in preparation for new filament. Your CubePro will now tell you that it?s heating the print jet. Remove the thumb screw from the new c... Read More
Hi! I?m JD with 3D Systems. And today we?re going to show you how to install or replace a material cartridge on the CubePro. We?ll get started by replacing a cartridge to bay 1. To install a cartridge, simply go to your setup menu and press Replace on the touch screen and select what cartridge you want to replace. Just as a reminder, the one all by itself is bay 1. And here?s 2 and 3. The print head will now move to the back waste container and heat up in preparation for new filament. Your CubePro will now tell you that it?s heating the print jet. Remove the thumb screw from the new cartridge before using but hold on to it. We?ll use it for the previous cartridge. The screws keep the material locked down so it doesn?t unravel when stored. Pull about 11 inches of new material from the cartridge then cut off any parts that are chewed up, usually only 2 inches worth. Alright, time to pull out the old material. Make sure the tip of your filament isn?t kinked or too bendy. Thread the filament under the cartridge clamp bar and into the feed tube. Install the new cartridge from the front of the CubePro and into the cartridge bay. Push the filament between the front of the cartridge and the eyelet. Here?s why you don?t want it to be too bendy. You need to carefully thread the filament all the way up through the tube inside the plastic centipede thing here and where it curves into the print jet. If it gets stuck, don?t worry. You have plenty of time. Sometimes it needs a little coaxing or back and forth motion. Keep moving the filament forward until you see it come out through the print jet. You can just see it through the frosted waste container. By now the grippers will have taken hold of the material which will move out on its own until you?re satisfied. Seriously, this will keep going unless you stop it so don?t go out for coffee just yet. Hit the check box. Next, you?ll be asked to put the cartridge firmly into the bay. Once you hit that checkmark, the printer will complete the cartridge installation and then cool off the print jets. Once that?s complete, you?ll be able to load another cartridge using the same process. Be careful not to thread or push the film at more than an inch or two into the cartridge. Anything further than that, the filament could unspool in the cartridge causing it to tangle. Well hope that helps. This is JD with 3D Systems signing off. Now you can have some coffee.
Transcript: Greetings from 3D Systems. In this tutorial, we’ll show you how to replace a cartridge in the cube. To start, navigate to the settings menu and select Change Cartridge. You’ll be prompted to select which cartridge you want to change by pressing on the touch screen. Before you remove the cartridge, the nozzle will then heat up to ensure it’s clear of material. When everything is ready to go, you will be prompted on screen to rotate and remove the print dongle and then remove the cartridge from its holder onto the side of the printer. After removing the cartridge, insert the print do... Read More
Greetings from 3D Systems. In this tutorial, we’ll show you how to replace a cartridge in the cube. To start, navigate to the settings menu and select Change Cartridge. You’ll be prompted to select which cartridge you want to change by pressing on the touch screen. Before you remove the cartridge, the nozzle will then heat up to ensure it’s clear of material. When everything is ready to go, you will be prompted on screen to rotate and remove the print dongle and then remove the cartridge from its holder onto the side of the printer. After removing the cartridge, insert the print dongle into the hole in the cartridge to safely secure it for storage. Next we’ll replace the cartridge. Just follow the directions and motions on screen to see exactly how to remove the dongle. You can then insert the new cartridge on the side. Next, insert the dongle and rotate it into its locked position. The printer will heat the new nozzle back up, purge some material to make sure it’s flowing, and wipe off any excess. Once the process is complete, the nozzle will cool back down and you’re all set. Thanks for watching and have fun printing.
Questions & Answers
No question have the been asked yet.
* Nickname:

* Your Answer:


Sign Up for Newsletter

Submit a New Question

Submit