0
Promotions & Deals
Contract Holder Contract # GS-03F-053AA
Need Help 1-800-944-4573 1-800-944-4573
Keencut SteelTrak Vertical Substrate Cutters
$3,478.50

Keencut SteelTrak Vertical Substrate Cutters

Keencut SteelTrak Vertical Substrate Cutters

Keencut SteelTrak Vertical Substrate Cutters

Brand: Keencut
0 Questions, Ask a Question
Starting At

Was: $3,865.00

Your Price: $3,478.50

You Save: 10%

Brand New Price Match Guarantee In Stock Ships Free Over $75
Choose Sizes Below

AdditionalOptions

ProductItem NumberPriceQty
Keencut SteelTrak 65" Vertical Substrate Cutter - 60380Item Number : 60380Price :

Was: $3,865.00

Your Price: $3,478.50

You Save: 10%

Qty :
Keencut SteelTrak 82" Vertical Substrate Cutter - 60385Item Number : 60385Price :

Was: $4,435.00

Your Price: $3,991.50

You Save: 10%

Qty :
Keencut SteelTrak 98" Vertical Substrate Cutter - 60383Item Number : 60383Price :

Was: $4,795.00

Your Price: $4,315.50

You Save: 10%

Qty :

ProductDescription

Keencut SteelTrak Vertical Substrate Cutters are developed specifically for the tougher and thicker rigid and semi-rigid substrates used in today’s sign making market. With a cut length option of 65", 82" or 98", SteelTrak Cutters are the most accurate and easiest-to-use manual vertical cutters available today. Check out all of the features below and save on the Keencut SteelTrack vertical material cutter today with MyBinding.com.
This product is currently only available to our customers in the United States of America. If you are located internationally, you will need to contact a local dealer to purchase this particular product.

Product Details

  • Cut Length: 65" - 82"
  • Max Cutting Thickness: 13mm
  • Suitable for Cutting: Aluminum composite, PVC, Foam board, foam center board, corrugated plastics, glass, acrylic, and more.
  • 4 Turn & Lock ready mounted tools for instant cutting.
  • 4 cutting tools include: Utility Blade, Acrylic Scoring Blade, and Composite Twin Wheel Cutting Head (Glass Scoring Blade optional).
  • Pre lubricated ball bearings on steel slide tracks for precision, low friction, and years of trouble-free life without adjustment.
  • Automatic blade disengagement at the end of each cut.
  • Fully equipped and ready for work, including 100 blades.
  • Accepts standard utility blades.
  • Transparent cutline cursor for precise and perfect cuts every time.
  • Telescopic legs adjust for height to save you work and effort.
  • Precise screw adjusted perma-lock square for straight cuts.
  • Fitted counterbalance to keep the multi-tool sliding head stationary until you move it.
  • Full length extra-grip clamping system.
  • Extruded aluminum back beams offer stable support for all sizes of sheets.
  • Two flip stops to make cutting any size incredibly easy and user-friendly.
  • Precise Imperial and Metric vertical and horizontal scales.
  • Wall mount kit included for clean and easy usability.
  • 20 Year warranty on cutting wheel bearings.
  • 5 year general warranty on all parts (except blades, sight line strips, and cutting wheels).
  • Optional V-Groove Cutting Tool enables the folding of aluminum composite, PVC, and Corrugated Plastics.

ProductReviews

1 Review(s)
image alt text

Reviewed on 5/13/2016

Had we realized how easy it would be to cut rigid material with the Keencut SteelTrak we would have bought it months ago.

1 Item(s)

per page
  • 1 star
    1 star
    1 star
    1 star
    1 star

DemonstrationVideo

Transcript: Keencut SteelTrak

3 Position Rotating Turret For Quick & Easy Blade Selection
Left & Right Production Stops (Quick. Simple. Precise)
Unique Hinge-Out Slideway (Easy Cleaning and Maintenance)
Unique Counterweight System (Easy Loading of Large Sheets)


Cuts Aluminium Composite
Cuts PVC Foamboard
Cuts Foam Centred Boards
Cuts Corrugated Plastics

Inspired Design

 ...
Read More
Keencut SteelTrak
  • 3 Position Rotating Turret For Quick & Easy Blade Selection
  • Left & Right Production Stops (Quick. Simple. Precise)
  • Unique Hinge-Out Slideway (Easy Cleaning and Maintenance)
  • Unique Counterweight System (Easy Loading of Large Sheets)
  • Cuts Aluminium Composite
  • Cuts PVC Foamboard
  • Cuts Foam Centred Boards
  • Cuts Corrugated Plastics
Inspired Design  

Foster Keencut SteelTraK Installation Video

Transcript: Installing the SteelTrak. Inside the box: eight support arms, replacement site line strip, installation CD, wall mount bracket with nuts and bolts (You will need bolts for free stand kit), bag of hardware and Allen keys, squaring arm. You will need two people to lift the cutter out of the box. Set the legs to a comfortable height (recommend between 10” to 12”). Important step: insert nuts into squaring arm. Hand tighten center bolts. Optional free stand kit. Wall mounted kit included. Free stand kit leg should be 5” shorter than the length of the cutter legs. Remove bolts from wall mount... Read More
Installing the SteelTrak. Inside the box: eight support arms, replacement site line strip, installation CD, wall mount bracket with nuts and bolts (You will need bolts for free stand kit), bag of hardware and Allen keys, squaring arm. You will need two people to lift the cutter out of the box. Set the legs to a comfortable height (recommend between 10” to 12”). Important step: insert nuts into squaring arm. Hand tighten center bolts. Optional free stand kit. Wall mounted kit included. Free stand kit leg should be 5” shorter than the length of the cutter legs. Remove bolts from wall mount kit. These are used with the free stand kit too. Two people needed to attach the stand. You will need a 13 mm wrench and 6 mm Allen key to tighten. If using a screw gun, do not over tighten. Make sure the support arm is flush to the vertical spine. Repeat for final arms. Slide flip stops on both sides. Squaring the cutter. Recommend testing with a 48” to 60” H piece of foam board or card board. Make a 2” cut at the top. Make a 2” cut at the bottom. Rotate board like a page in a book. Top stays on top, bottom stays on bottom. Line the blade into the bottom cut. Then clamp the material in place. Now, make a 2” cut again at the top. Top cuts didn’t line up, needs to be adjusted. Since the cuts didn’t line up, we will have to adjust the arm. Squaring the arm is done with the Squaring Adjustment Block. First, you must loosen the screw that attaches the squaring arm to each leg and the left side center bolt. You will need a wrench to loosen the left bolt. Do not loosen the right bolt. This is used as a pivot point when adjusting the squaring arm. Just a couple of turns of the squaring adjuster. The amount of the cuter is off shows double the error. Repeat square test until the cuts align. Blade cut into both bottom and top cut line. The cutter is now square. Tighten the two screws and bolt that were loosened. Calibrating the scales. Set flip stop to an easy number. We used 5”. Use a tape measure to measure the cut piece. If you are off, move the scale the amount it’s off, then retest. Test the scale again. We used 4” this cut. Repeat for second side. Now, your cutter is ready! SteelTrak size for technical reference. Serial number. Reference this number when contacting your dealer.

Foster Keencut SteelTraK Glass Cutting Kit Instructions Video

Transcript: Keencut – the world’s finest cutting machines. SteelTrak Glass Cutting Attachment fitting instructions. Glass cutting kit includes: break-off ramp, long wear-strip, short wear-strip. Slide the short steel strip into the squaring arm. Apply two drops of superglue to the squaring arm. Position the wear-strip. Slide the long steel strip into the squaring arm. Apply two drops of superglue to the squaring arm. Position the wear-strip. Clip the break-off ramp into the slideway groove. Cutting glass. Position glass. Engage clamp. Select glass cutter. Engage ratchet four clicks. Make a single scor... Read More
Keencut – the world’s finest cutting machines. SteelTrak Glass Cutting Attachment fitting instructions. Glass cutting kit includes: break-off ramp, long wear-strip, short wear-strip. Slide the short steel strip into the squaring arm. Apply two drops of superglue to the squaring arm. Position the wear-strip. Slide the long steel strip into the squaring arm. Apply two drops of superglue to the squaring arm. Position the wear-strip. Clip the break-off ramp into the slideway groove. Cutting glass. Position glass. Engage clamp. Select glass cutter. Engage ratchet four clicks. Make a single score. Press at the top to finish. When finished, remove and store ramp. www.keencut.com. Inspired design. Precision engineering.

Specification

Part NumberCutting Length
6038065"
6038582"
Questions & Answers
No question have the been asked yet.
* Nickname:

* Your Answer:


Sign Up for Newsletter

Submit a New Question

Submit