Ghent 36"x24" 1Door Concealed Light Aluminum Indoor Cork Board

448.54 NewCondition OutOfStock

We're sorry, but we no longer offer this item.

We do not currently have any alternative products to offer. We apologize for the inconvenience.

1-1/2" Royal Blue Plastic Binding Combs - 100pk

^$46.⁹⁹
- Hole Pattern: 19 Hole
- Approximate Capacity: 320 Sheets
- Length: 11" (19 Rings)
- Shape: Oval
Learn More
1-3/4" Royal Blue Plastic Binding Combs - 50pk

^$27.⁴⁹
- Hole Pattern: 19 Hole
- Approximate Capacity: 375 Sheets
- Length: 11" (19 Rings)
- Shape: Oval
Learn More
3/16" Clear Plastic Binding Combs - 100pk

^$11.²⁹
- Hole Pattern: 19 Hole
- Approximate Capacity: 10 Sheets
- Length: 11" (19 Rings)
- Shape: Round
Learn More
9/16" Clear Plastic Binding Combs - 100pk

^$12.⁶⁹
- Hole Pattern: 19 Hole
- Approximate Capacity: 105 Sheets
- Length: 11" (19 Rings)
- Shape: Round
Learn More

Ghent 36"x24" 1Door Concealed Light Aluminum Indoor Cork Board

Skip to the end of the images gallery

Skip to the beginning of the images gallery

SWIPE FOR MORE IMAGES

Product Description

Put your posted material into the spotlight inside a concealed lighting enclosed bulletin board. The satin aluminum framed units come fully equipped with lockable hinged doors, shatter-resistant acrylic and mounting hardware. The natural cork posting surface is self-healing and will withstand years of usage. Interior case depth is 2-1/4" for all units.Overall unit depth measures 3-1/8" deep. The illuminated units feature concealed fluorescent lighting (complete with three wire electrical lead) centered over each door opening to further attract attention to your display. Illuminated units require electrical installation by a licensed Electrician. Consult your local electrical code to determine the correct method of installation. Lamps have been mounted in the unit, but have not been wired.

Product Details

Size:36" x 24"
Surface:Cork Bulletin Board
Frame Style:Satin Aluminum
Number of Doors:1
Interior Case Depth:2-1/4 in
Overall Unit Depth:3-1/8 in
Features:Concealed Fluorescent Lighting, Shatter Resistant Acrylic, Lockable Doors, Mounting Hardware
Special Installation Needs:Licensed Electrician
Part Number: CPA13624K
Warranty: 10-Year Manufacturer's Warranty

Demonstration Video

Transcript: Made in the USA
10 Year Warranty

Glass Enclosed
Materials & Tools
For the most secure mounting of the unit, install all mounting screws directly to wall studs. When wall studs cannot be used we recommend using hallow wall anchors.

The recommended mounting height of the unit is 78” from the floor to the top of the unit.

Important: Units with lighted headers require electrical installation by a licensed electrician. Consult you local electrical code to determine the correct method of installation.

-The lamps have been mounted in the unit, but have not been wired.
-Access to the ... Read More

Made in the USA 10 Year Warranty
Glass Enclosed Materials & Tools For the most secure mounting of the unit, install all mounting screws directly to wall studs. When wall studs cannot be used we recommend using hallow wall anchors.
The recommended mounting height of the unit is 78” from the floor to the top of the unit.
Important: Units with lighted headers require electrical installation by a licensed electrician. Consult you local electrical code to determine the correct method of installation.
-The lamps have been mounted in the unit, but have not been wired. -Access to the lamps can be made by removing the rear panel of the header section of the unit.
Provided L-Hangers (for units larger than 96”) Keys to Message Center
Additional Level Drill 1/8” drill bit #8 Sheet metal Screws Phillips Head Screw Drivers Stud-Finder Pencil Tape Measurer
When wall studs cannot be used, we recommend using an expandable wall anchor
Locate Studs if Available Mark at your desired location(s) (at least 76 7/1” from floor) Scribe a level line Drill using 1/8” drill bit at marked locations Allow screw to protrude ¼” from the wall Drill screws at marked locations for all 4 corners of message center Hang unit onto protruding screw heads using the sheet metal brackets on the rear of the Message Center
To mount a 96” long unit, use the “L”-hangers (provided) in addition to wall anchors (not provided) and follow the mounting instructions sent with the enclosed message center with the “L”-Hangers. Fasten to the wall with 2” #8 self-tapping screws. (Before drilling through the face of the board make sure to score the board surface so that it doesn’t get tangled in the screw.)
Unlock door with provided key and remove foam

Recommended for you