Luxor Steel Magnetic Wall-Mounted Whiteboard

Today we’re going to learn how to install a WB series white board by Luxor. Insert the tray into the bottom grove on your white board, slide the tray to the center. Determine the general location that you’d like to install your white board, you’ll be snapping two horizontal chalk lines at the heights as indicated on the drawing. Please consult that your installation instructions for the proper height from the floor to each chalk line. The hardware provided is for installation on dry wall, if you’ll be attaching to another material such as concrete you’ll have to have your fasteners furnished by others. If attaching to dry wall, you’ll need to drill eight quarter inch diameter holes as specified under drawing, snap the chalk line between the two marks that have been made from the floor to the bottom, next snap a chalk line between the two markings at the top, place the plastic inserts into the holes that have been pre-drilled, use a soft nail or harmer to tap the plastic inserts into the hole. Attach the brackets at the bottom using the long screw that has been included in the hardware pack, make sure that the bracket is attached at its lowest position. After installing all the brackets at the bottom, install the brackets at the top, make sure to install the brackets at the top at their highest position. You will later tap these down using a harmer, place the white board on the lower brackets making sure to center it with the middle lower bracket, attach the bracket at the bottom to the wall board using the short screw that was provided in the hardware pack. Start with the middle lower bracket, tap the top brackets down so they are touching the top of the white board, and attach the brackets to the wall board using the short screws that have been provided in your hardware pack, carefully remove the plastic protective cover from the front surface of the white board, now you are ready to begin enjoying the use of your new white board from Luxor. For downloadable instruction sheets and more visit www.luxorfurn.com