MediaTac 25.5" x 164' Pressure Sensitive Aqueous Adhesive
222.09 NewCondition OutOfStock

We're sorry, but we no longer offer this item.

Call us at 1-800-944-4573 for personalized recommendations

or check out these similar items that may be a good fit:

MediaTac 25.5" x 164' Pressure Sensitive Aqueous Adhesive

Part #: PSA26-25164
Brand: Drytac
1 Questions, 1 Answers
  • Film Finish: Clear Polyester
  • Core Size: 3"
  • Thickness: 0.5 mil
  • Hot or Cold: Hot
Additional Sizes Below
We're here for you!
Please call 1-800-944-4573 for help finding a comparable solution, or
Click to Chat

SWIPE FOR MORE IMAGES
  • 0
  • 1

Product Description

This 25.5" x 164' MediaTac consists of a smooth coating of Drytac's aqueous acrylic adhesive on both sides of a 0.5 mil polyester film carrier. The adhesive's new non-slip release liner allows boards pre-coated with MediaTac to stack safely without slippage. The 25.5" x 164' MediaTac adhesive is ideal for image decal and high volume mounting applications. This adhesive can be used for pre-coating mounting boards and for mounting prints to smooth porous substrates such as foam boards, cardstock, GatorFoam and tempered hardboard. All of this makes MediaTac an economical general purpose pressure-sensitive aqueous adhesive with a non-slip release liner. Product number PSA26-25164.

Product Details

  • Roll Width: 25.5"
  • Roll Length: 164'
  • Core Size: 3"
  • Laminate Type: MediaTac Adhesive
  • Filmic Carrier: 0.5 mil (13 micron) clear polyester
  • Adhesive Bond: Permanent
  • Adhesive Base: High
  • Application Speed: 1' - 8' per minute
  • Application Temp: Room Temperature - 120F (49 C)
  • Release Liner: Moisture Stable Paper (60 lbs) (100 gsm)

Technical Data

MediaTac is a 0.5 mil (12µ) clear PET film, coated on both sides with a pressure sensitive acrylic adhesive, one of which is protected by a bleached clay coated Kraft paper siliconized on both sides with a differential release. The adhesive is self-wound on the release liner.

Typical Applications
  • Developed for photo labs where a high grade of moisture stability within the mounting film is required.
  • Ideal for high-volume mounting, including pre-coating boards and image decal applications.
  • Recommended for mounting prints to smooth, porous substrates, such as white display board, foam boards, Gatorfoam, and tempered hardboard.

Product Structure

Adhesive Acrylic (Pressure Sensitive)
Film Clear PET
Adhesive Acrylic (Pressure Sensitive)
Release Liner 2 Side Clay Coated, 2 Side Siliconized Kraft


Physical Characteristics

Film Thickness 0.5 mil (12µ)
Adhesive Layer 1 mil (25µ) on each side
Film/Adhesive Ratio 1:0.5:1
UV Protection Factor Not Applicable
Outdoor Durability Not Applicable
Service Temperature Range -4°F to 248°F (-20°C to 120°C)
Shelf Life Use within 1 year after opening original box
Storage Conditions 59°F to 72°F (15°C to 22°C); 50 - 55% Relative Humidity


Process Settings

Equipment Type Temperature Dwell Time
Roller Laminator Room temperature to 104°F (40°C) 1 ft to 8 ft (0.3m to 2.5m) per minute
Press Not recommended

Downloadable Information

Questions & Answers

Thank you for your question. The adhesive can be attached to the item you want to mount, i.e. photo print and when ready to apply it to a substrate you’d peel off the liner that’s protecting the 2nd surface. You wouldn't need to attach it to something else. We have it in a size 25.5" x 15' roll, that is perfect to sample with your applications with laser/water cutter.

Answered by MyBinding
4 years and 10 months ago ago

Submit a New Question