- Capable to bind up to 2 inches (51mm) thick and 14 inches (356mm) wide
- Adjustable ring opener control for repeatable comb opening positions
- Lightweight and Portable
- All Metal Construction
- Made in the USA with more than 98% recyclable materials
- Model: HD4470 ONYX
- Capacity Size: 14"
- Weight: 21.75 lbs
- Machine Dimensions: 12" x 19" x 14" (H x W x D)
- Warranty: Three Year Manufacturer Warranty
The Onyx HD4470 can open comb elements from a quarter-inch to two-inches in diameter. And its wide base can accommodate up to 14-inches in length. The Onyx HD4470 is a standalone unit but will also mount on any Rhin-O-Tuff vertical OD or HD punch with the optional mounting kit. Thread your project and close the comb. As with the whole Onyx line, it's built Rhino-tough and has a full three-year warranty. That's the Rhin-O-Tuff Onyx HD4470. For more demos,reviews, and how-tos, check out MyBinding.com.
Now you're all set up, turn the whole machine on, do all your punching fo... Read More
Welcome to MyBinding video. Let's take a look at the Rhin-O-Tuff Onyx HD4470 plastic comb opener as it works in tandem with the Onyx OD4012 punch. There are two small brackets that you attach to the back end of the punch machine. Be sure the bolts are down good and tight and on both sides. It's now time to place the 4470 on top of your punch. Do so so the holes line up on both brackets. There's little hand screws; tighten it down so that both the bracket and the frame of the comb opener are nice and tight on both sides.
Now you're all set up, turn the whole machine on, do all your punching for your project, and place the plastic comb on the comb opener. Make sure the teeth always faces up and the project faces down so the book does not fall apart during use. Drape the punched holes of your book over the teeth of the comb and close it up. And you're all done.
And there it is. That's the HD4470 on top of the OD4012. For more demos, reviews, and how-tos, check out MyBinding.com.
Using the Onyx HD7000 punch below, you can punch up to 40 sheets of 20lb paper per lift. Punch through your entire project and organize it. Now it's time to bind. The HD4470 p... Read More
Welcome to MyBinding video. Let's take a look at the Rhin-O-Tuff Onyx 4470 in conjunction with the HD7000 punch. This heavy duty plastic comb opener is solid. It fits right here on top of the HD7000 punch and bolts right in so it doesn't move. It works just fine as a standalone unit for two operators or a different system but saving space is always nice. And here's a demonstration of these two machines working together.
Using the Onyx HD7000 punch below, you can punch up to 40 sheets of 20lb paper per lift. Punch through your entire project and organize it. Now it's time to bind. The HD4470 plastic comb opener module can handle up to two-inch round plastic combs. With comb binding, make sure the teeth of the comb face up and the project faces down, that way it doesn't come apart during use. Drape the project over the teeth of the comb, assuring they all go through, close the comb and you're all set. There it is, that's the Onyx HD4470. For more demos, reviews, and how-tos, check out MyBinding.com.