Rhin-O-Tuff Wire Hanger for HD8000
52.86
NewCondition
OutOfStock
We're sorry, but we no longer offer this item.
Call us at 1-800-944-4573 for personalized recommendations
or check out these similar items that may be a good fit:
-
Tamerica TW3100 3:1 Pitch Twin Loop Wire Binding Machine
$298.61
- Punching Speed: 5,000 Sheets/ hour
- Binding Speed: 250 Books/ hour
- Pitch: 3:1 (3 holes per inch)
- Max Punching / Binding Length: 14"
-
Tamerica TW2100 2:1 Pitch Twin Loop Wire Binding Machine
$298.61
- Bind Length: 14"
- Bind Capacity: 100 Sheets
- Punch Capacity: 20 Sheets
- Manual or Electric: Manual
-
Fellowes Quasar 130 Double Loop Wire Binding Machine - 5217401
$373.50
- Binding Type: Wire
- Punching Type: Manual
- Punching Capacity: Capacity of 15 Sheets
- Binding Capacity: 130
-
Akiles WBM532 Modular Wire Closer
$418.19
- Stand Alone Design: The WBM532 modular unit is designed to also work as a stand alone unit, thus no additional "holding device" is required.
- Open-ended Closing Channel: allows closing of wires in any length, including those wires longer than 14".
- Wire Closer Control: provides fast & accurate setup of the wire closer. Gradual adjustment guarantees a perfect wire closing result, regardless of the type of wire being used.
- Closing Mechanism: Vertical
Rhin-O-Tuff Wire Hanger for HD8000
SWIPE FOR MORE IMAGES
- 0
- 1
Product Description
Rhin-O-Tuff Wire Hanger is the perfect addition attachment to the HD8000 Wire Closer . The wire hanger will assist and help the process of inserting wire prior to setting into closer to crimp the wire. By having this feature, the operator will know the exact length to crimp for the picture-perfect finish. (HD8000 Wire Closer Sold Separately)
Product Details
- Product Type: Wire Hanger
- Designed for: HD8000 Wire Closer
- Quantity: 1
- Product Number:11290
Demonstration Video
Transcript:
Welcome to MyBinding video. What’s missing here? The Rhin-O-Tuff Wire Hanger for your HD-8000. Why this piece doesn’t come with the machine? We’re not sure. But here it is. If you don’t have a wire hanger somewhere else, you’re going to need it. Two screws put it right on the front. And as with all screw sets, put them in first and then tighten them down, good and tight. And make sure that fence is leaning out, not toward the machine. It’s now binding time. Place your wire over the fence, remember than the loops, the small loops face up and out and then carefully, gently, in small batches at a ...
Read More
Welcome to MyBinding video. What’s missing here? The Rhin-O-Tuff Wire Hanger for your HD-8000. Why this piece doesn’t come with the machine? We’re not sure. But here it is. If you don’t have a wire hanger somewhere else, you’re going to need it. Two screws put it right on the front. And as with all screw sets, put them in first and then tighten them down, good and tight. And make sure that fence is leaning out, not toward the machine. It’s now binding time. Place your wire over the fence, remember than the loops, the small loops face up and out and then carefully, gently, in small batches at a time, drape your project over the teeth of the wire. When you’re all threaded through, lift it up and off and you’re ready to close it, but you already know that. You have the HD-8000. And that my friends is the wire closer for the HD-8000. For more demos, reviews and how-to’s, check out MyBinding.com.
