Stanley Bostitch 3/8" Chisel Point Staples 1000pk - BOSSB3538-1M
14.99 NewCondition InStock

Stanley Bostitch 3/8" Chisel Point Staples 1000pk - BOSSB3538-1M

Part #: BOSSB3538-1M
  • Packaged Quantity: 1000 / Box
  • Staple Type: Heavy Duty
  • Leg Length: 0.38"
  • Crown Width: 0.50"
  • Price Match Guarantee
  • Ships Free Over $75

$14.99

FREE shipping for orders over $75*

SWIPE FOR MORE IMAGES
  • 0
  • 1
video

Product Description

Premium, heavy-duty staples were developed for optimum performance in Bostitch 00540, B310HDS, 03201 and other heavy-duty staplers. Made from superior quality, high carbon wire to reduce buckling and jamming, the finely honed chisel points deliver maximum penetration for maximum sheet capacity. Optimized 3/8" (19mm) leg length drives through a sizable 25 to 55 sheets to fasten them.

Product Details

  • Packaged Quantity: 1000 / Box
  • Product Type: Staples
  • Staple Type: Heavy Duty
  • Leg Length: 0.38"
  • Crown Width: 0.50"
  • Media Capacity: 55 Sheets
  • Features: Chisel Point
  • Material: High Carbon Steel
  • Part Number: BOSSB3538-1M

Demonstration Video

Transcript: This is an introduction to what staples you should buy. I’ll go over how to search for it, and other information you might not know about staples.

First off, many—if not most—staplers are labeled with what staple type it uses. This is often found inside, where the staples are loaded in.

If it’s not labeled, then check product page of the stapler and staples—staples especially are labeled with compatible staplers if they are custom. You can also check the box your stapler came in.

Most desktop staplers will use either premium or standard staples. Unless labeled otherwise, these are a ...
Read More

This is an introduction to what staples you should buy. I’ll go over how to search for it, and other information you might not know about staples.

First off, many—if not most—staplers are labeled with what staple type it uses. This is often found inside, where the staples are loaded in.

If it’s not labeled, then check product page of the stapler and staples—staples especially are labeled with compatible staplers if they are custom. You can also check the box your stapler came in.

Most desktop staplers will use either premium or standard staples. Unless labeled otherwise, these are a 1/4” length. And they come in different sized strips, most commonly with 210 staples.

You may also find staples labeled with a fraction. This number is wire gauge(or thickness), and the length length in millimeters.

For the gauge, the larger the number, the thinner the wire is. So if you see a 26/6 staple, this is a standard sized 1/4” staple. A 26/8 staple is a standard 5/16” staple.

Now, each staple supports a different amount of pages—do remember that your stapler will determine the limit because it will only support certain size of staples.

Some staples use custom staples, like cartridges. In this case, custom staples are usually well labeled with what stapler they are used in.

If, when you staple, two staples come out at the same time. This probably means you need heavy duty staples. The gauge on these are thicker than standard staples.

If your staples are only getting stuck, then you might need a thinner gauge of staple. Or more commonly, you might need to buy a new stapler.

Questions & Answers

Submit a New Question