0
Promotions & Deals
Contract Holder Contract # GS-03F-053AA
1-800-944-4573
9/32" Replacement Punch Head for Swingline LightTouch and EasyView High Capacity Punch
$8.70NewConditionInStock

Swingline 9/32 Inch Replacement Punch Head - 74865 Image 1

9/32" Replacement Punch Head for Swingline LightTouch and EasyView High Capacity Punch

Part #: SWI-74865
Brand: Swingline
0 Questions, Ask a Question

Was: $15.35

Your Price: $8.70

You Save: 43%

Brand New Price Match Guarantee In Stock Ships Free Over $75

ProductDescription

This Swingline 9/32" Replacement Punch Head is recommended to be installed regularly to maintain maximum productivity. This replacement punch head is compatible with Swingline LightTouch and EasyView LightTouch High Capacity Punch (A7074034, A7074030 & A7074031)ONLY. Replacing the punch head on your hole punch will help you ensure the highest quality punch every time by reducing the force needed to punch through your paper. This will help decrease the risk of stress related injuries and prolong the life of your equipment. For these reasons, Swingline recommends that you consider changing the punch heads on your unit on an annual basis.

Product Details

  • Replacement punch heads
  • Compatible with Swingline LightTouch and EasyView LightTouch High Capacity Punch (A7074034, A7074030 & A7074031)ONLY
  • 9/32" punch hole diameter
  • 20 sheet capacity
  • Swingline Part Number: A7074865
  • Primary UPC: 050505748655

ProductReviews

There are No Reviews on this Product Yet

Be the first to review this product

  • 1 star
    1 star
    1 star
    1 star
    1 star

DemonstrationVideo

Transcript: Welcome to MyBinding how-to videos. This video shows you how to replace the punch head on a Swingline Heavy Duty Punch. Here at MyBinding, we sell all kinds of punch heads and punch head replacements. This one is a pretty simple one to replace. On the left side of the lever shaft is a small round ring. Pop it open with a screwdriver. Careful, that ring will shoot across the room. The lever shaft is then free to slide out through all the punch heads. You could replace one or all of them at this point. Remove the chop tray cover on the bottom and with the screwdriver and your fingers, si... Read More
Welcome to MyBinding how-to videos. This video shows you how to replace the punch head on a Swingline Heavy Duty Punch. Here at MyBinding, we sell all kinds of punch heads and punch head replacements. This one is a pretty simple one to replace. On the left side of the lever shaft is a small round ring. Pop it open with a screwdriver. Careful, that ring will shoot across the room. The lever shaft is then free to slide out through all the punch heads. You could replace one or all of them at this point. Remove the chop tray cover on the bottom and with the screwdriver and your fingers, simply twist off the nut head. To turn it back top side, simply remove the old punch and replace it with the new punch. Put the lever bar back into place, screw everything back on from the bottom, tighten with the screwdrivers, and you're on your way. There it is. It's that simple. For more demos, reviews, and how-to's, check out MyBinding.com.
Questions & Answers
No question have the been asked yet.
* Nickname:

* Your Answer:


Sign Up for Newsletter

Submit a New Question

Submit