9/32" Replacement Punch Head for Swingline LightTouch Heavy Duty Punch - 74873
14.03
NewCondition
InStock
9/32" Replacement Punch Head for Swingline LightTouch Heavy Duty Punch - 74873
SWIPE FOR MORE IMAGES
- 0
- 1
- 2
- 3
- 4
- 5
Product Description
This Swingline 9/32" Replacement Punch Head is recommended to be installed regularly to maintain maximum productivity. This replacement punch head kit is compatible with Compatible with Swingline LightTouch Heavy Duty Punch (A7074357) only. Replacing the punch head on your hole punch will help you ensure the highest quality punch every time by reducing the force needed to punch through your paper. This will help decrease the risk of stress related injuries and prolong the life of your equipment. For these reasons, Swingline recommends that you consider changing the punch heads on your unit on an annual basis.
Product Details
- Replacement punch heads
- Compatible with Swingline® LightTouch® Heavy Duty Punch only
- 9/32" punch hole diameter
- 40 sheet capacity
Item Specifications
- UPC: 050505748730
- Punch Hole Size: 9/32"
- Sheet Capacity (20 lb paper): 40
- Actual Machine Dimensions: 3.75"x3.7"x1.2"
- Actual Machine Weight: 4.2lbs
- Shipping Length: 8.2"
- Shipping Width: 4.8"
- Shipping Height: 7.8"
- Shipping Weight: 4.2lbs
Demonstration Video
Swingline 9-32" Replacement Punch Head for LightTouch Heavy Duty Punch
Transcript:
Welcome to MyBinding Video. This is the Punch Head Replacement Guide for the LightTouch Heavy Duty Punch from Swingline. Start by removing the paper guide and the chip tray. Turn the unit over to access and remove the two screws holding the top cover on, then remove the cover. Back underneath, find the screw holding the punch you want to replace, and remove it. Then remove the screw securing the punch to the arm mechanism. The punch should come free, and you can drop your new one down in its place. Close the latch around the arm mechanism, and replace the screw. Line up the bottom mounting hol ...
Read More
Welcome to MyBinding Video. This is the Punch Head Replacement Guide for the LightTouch Heavy Duty Punch from Swingline. Start by removing the paper guide and the chip tray. Turn the unit over to access and remove the two screws holding the top cover on, then remove the cover. Back underneath, find the screw holding the punch you want to replace, and remove it. Then remove the screw securing the punch to the arm mechanism. The punch should come free, and you can drop your new one down in its place. Close the latch around the arm mechanism, and replace the screw. Line up the bottom mounting hole and replace the screw underneath. Just replace the cover, chip tray and paper guide, and your punch should be in working order again. For more videos and all your binding needs, visit MyBinding.com.
