0
Promotions & Deals
Contract Holder Contract # GS-03F-053AA
Need Help 1-800-944-4573 1-800-944-4573
Xyron 9" ezLaminator with 60' Laminate Cartridge - 624672
$80.99NewConditionInStock

Xyron 9" ezLaminator with 60' Laminate Cartridge - 624672

Xyron 9" ezLaminator with 60' Laminate Cartridge - 145612 Image 1

Xyron 9" ezLaminator with 60' Laminate Cartridge - 624672

Part #: XRN-624672
Brand: Xyron
0 Questions, Ask a Question

Was: $89.99

Your Price: $80.99

You Save: 10%

Brand New Price Match Guarantee In Stock Free Shipping

ProductDescription

This newly redesigned Xyron ezLaminator offers an easy to use lamination technology for workplace lamination projects. This portable cold laminator is always ready because it requires no electricity, batteries or warm up time. The cold laminate is photo safe, allowing you to work without the worries of heat or toxic fumes. This ezLaminator requires no pouches or pockets. Its easy drop-in cartridges allow for quick changes between projects and the high quality laminate is guaranteed not to peel. It is just easy to laminate with Xyron ezLaminator, simply slip your documents into the entry tray, crank the handle and trim with the onboard trimmer.

Product Details

  • Xyron ezLaminator offers easy to use lamination technology
  • Always ready – No heat. Not Odor. No Waiting.
  • Easy to Use – Place your item in machine and turn the handle.
  • Flexible – multiple refill options to suit your project needs.
  • Preloaded with a 60 ft. laminate cartridge
  • Use your existing ezLaminator Pro cartridges in this new model
  • Also look for our custom magnet cartridge

ItemSpecifications

  • Code: 624672
  • Color: Black
  • Dimensions (in): 13.17 x 7 x 6
  • Material Width: 9in. (22.9cm)
  • Material Length: 25ft (7.6m)
  • Weight (ibs): 4.9

ProductReviews

There are No Reviews on this Product Yet

Be the first to review this product

  • 1 star
    1 star
    1 star
    1 star
    1 star

DemonstrationVideo

Transcript: This is the Xyron 9” ezLaminator - model 145612!

It’s light weight and portable. Ready to be stored, and always ready to be used.

It’s as simple as inserting your project straight into the machine. With the 9 inch cartridge, place the project against the left edge.

Then slowly rotate the handle to laminate the project.

When it comes fully out the back, next push the trimmer down and slide it across the project, cutting it free.

On this project, my left and right side are already evenly spaced, but the top and bottom require a little trimming.

You can cut all the way to ...
Read More
This is the Xyron 9” ezLaminator - model 145612!

It’s light weight and portable. Ready to be stored, and always ready to be used.

It’s as simple as inserting your project straight into the machine. With the 9 inch cartridge, place the project against the left edge.

Then slowly rotate the handle to laminate the project.

When it comes fully out the back, next push the trimmer down and slide it across the project, cutting it free.

On this project, my left and right side are already evenly spaced, but the top and bottom require a little trimming.

You can cut all the way to the edge of the project, or even through the material and the lamination will still hold strong.

It can laminate projects that are 1/8” or less, it uses cold adhesive—which means no warm up time, and the laminate is photo safe!

There are also multiple cartridges, like the Magnet laminate, and your standard 60 foot roll of double sided lamination.

The changing of the cartridges is very simple.

Push on the orange button in the front and lift the lid up. Now wiggle the cartridge out. From here you can see a tab at the bottom. If you have a 5” cartridge, then flip this up first, then insert the cartridge on the right side.

Otherwise we’ll first make sure that the laminate is free to turn. I had to pull on the end to loosen it—this also gives you enough laminate to feed through the rollers.

Place the cartridge back in and before you close the top cover, feed the laminate through the black rollers, then close the lid.

Give the lever a few rotations to make sure there are no wrinkles and you’re ready for your project!
Questions & Answers
No question have the been asked yet.
* Nickname:

* Your Answer:


Sign Up for Newsletter

Submit a New Question

Submit