0
Promotions & Deals
Contract Holder Contract # GS-03F-053AA
Need Help 1-800-944-4573 1-800-944-4573

Sorry, but Xyron Model 900 Creative Station Laminator - XRN900 is no longer available to buy.

We think you might like one of these instead:

Xyron 9" Creative Station Laminator with 5" Option - 624632

Xyron 9" Creative Station Laminator with 5" Option - 624632

Was: $89.99

Your Price: $80.99

You Save: 10%

   
Xyron Model 900 Creative Station Laminator - XRN900
$69.99NewConditionOutOfStock

Xyron Model 900 Creative Station Laminator - XRN900

Xyron Model 900 Creative Station Laminator - XRN900 Image 1

Xyron Model 900 Creative Station Laminator - XRN900

Part #: XRN900
Brand: Xyron
0 Questions, Ask a Question
X

ProductDescription

The Xyron 900 Creative Station Laminator creates stickers, magnets, labels and laminate out of many items. Simply feed the item in, turn the handle and trim. The Xyron 900 Laminator applies an even layer of adhesive to items up to 9" wide and instantly laminates items up to 8.5" wide. With the Xyron 900 Creative Station you can change applications quickly with easy load cartridges. Plus, the Xyron 900 includes a removeable cutter for additional trimming. Each Xyron 900 Laminator includes a 9" wide x 20' long acid-free permanent adhesive cartridge, inspiration sheet and manual.

Product Details

  • Multi-use: sticker maker, laminator, label maker, magnet maker
  • Lightweight and portable
  • Refillable
  • Easty to use
  • No heat, electricity or batteries required
  • Edge to edge application
  • 1 Year Manufacturer Warranty
  • Part Number: 624632

ProductReviews

There are No Reviews on this Product Yet

Be the first to review this product

  • 1 star
    1 star
    1 star
    1 star
    1 star

DemonstrationVideo

Transcript: Welcome to MyBinding video. Let's take a look at the Xyron Model 900, a creative station nine inch personal laminator. No heat, electricity, or mess, this cold laminator has plenty of crafting and office applications. You slide your materials face up on the table in the front, turn the handle clockwise, and out it comes in the back. There's a built-in razor blade for precise cutting. This adhesive-backed laminate allows you to peel off the front and the back and your project becomes a sticker. Place it anywhere you like for a wonderful and sharp affect. The Xyron 900 comes with a 20 foot long ... Read More
Welcome to MyBinding video. Let's take a look at the Xyron Model 900, a creative station nine inch personal laminator. No heat, electricity, or mess, this cold laminator has plenty of crafting and office applications. You slide your materials face up on the table in the front, turn the handle clockwise, and out it comes in the back. There's a built-in razor blade for precise cutting. This adhesive-backed laminate allows you to peel off the front and the back and your project becomes a sticker. Place it anywhere you like for a wonderful and sharp affect. The Xyron 900 comes with a 20 foot long cartridge of this material. Assembly is really simple, everything slides right in and snaps into place. Close the lid and you're on your way. That's the Creative 9-inch laminator by Xyron. For more demos, reviews, and how-tos on this product and many more, check out MyBinding.com."
Transcript: Welcome to MyBinding video. This video is designed to help you with making laminated magnets with the Xyron 900, the nine-inch Creative Station laminator. Place your project to be made into a magnet right on the top of the table facing up and roll it through with the handle on the right-hand side. It will slide right out the back and there is a built-in razor blade for precise cut. Use scissors or a paper trimmer to trim all the edges, magnet on one side, the picture on the other. To conserve materials, do multiple pictures at one time by placing them side by side, running them through until t... Read More

Welcome to MyBinding video. This video is designed to help you with making laminated magnets with the Xyron 900, the nine-inch Creative Station laminator. Place your project to be made into a magnet right on the top of the table facing up and roll it through with the handle on the right-hand side. It will slide right out the back and there is a built-in razor blade for precise cut. Use scissors or a paper trimmer to trim all the edges, magnet on one side, the picture on the other. To conserve materials, do multiple pictures at one time by placing them side by side, running them through until there's enough margin to place the next one in, and forward it on through. Slice the whole thing off at once and then do your trimming.

Creating personalized magnets has never been easier, cleaner, or faster. That is making laminated magnets with the Xyron 900. For more demos, reviews, and how-tos on this product and many more, check out MyBinding.com.

Transcript: Welcome to MyBinding video. This is a look at the Lamination Magnet Cartridge refill by Xyron for the Creative Station nine-inch laminator by Xyron. First, remove the all-in-one unit from the box. Lift up on the tab and lift the lid. And then remove the other, or old, cartridge by pulling it straight up and out. With the edge tab facing toward the back of the machine, slide the new cartridge into the same slot. With your fingers, press down on that tab so that it goes underneath the roller. Close the lid all the way until it clicks, and let's begin. Place your project to be made into a magnet ... Read More

Welcome to MyBinding video. This is a look at the Lamination Magnet Cartridge refill by Xyron for the Creative Station nine-inch laminator by Xyron. First, remove the all-in-one unit from the box. Lift up on the tab and lift the lid. And then remove the other, or old, cartridge by pulling it straight up and out. With the edge tab facing toward the back of the machine, slide the new cartridge into the same slot. With your fingers, press down on that tab so that it goes underneath the roller. Close the lid all the way until it clicks, and let's begin. Place your project to be made into a magnet right on the top of the table facing up and roll it through with the handle on the right-hand side. It will slide right out the back and there is a built-in razor blade for precise cut. Use scissors or paper trimmer to trim all the edges, magnet on one side, the picture on the other. To conserve materials, do multiple pictures at one time by placing them side by side, running them through until there's enough margin to place the next one in, and forward it on through. Slice the whole thing off at once and then do your trimming. Creating personalized magnets has never been easier, cleaner, or faster. That is the Lamination Magnet Cartridge refill for the Xyron 900. For more demos, reviews, and how-tos on this product and many more, check out MyBinding.com.

StaffReview

Xyron 900 Creative Station Laminator Review

Xyron has made some of the most innovative crafting machines on the market, including their Create-A-Sticker machines and the Wishblade computerized cutting system. The Create-A-Sticker and Wishblade were cutting-edge gadgets that made crafting easier and, in the case of the Wishblade, brought it into the 21th century by enabling users to craft via computer. Now, with their Xyron 900 Creative Station, the company’s outdone itself and created a truly amazing machine. The Creative Station is a unit that can laminate, as well as create stickers, labels, magnets, and other crafts. It’s an absolute must-have for crafting fanatics and artistic types, but anyone who wants a cold laminator with some out-of-the-ordinary features will probably like it as well. Read on to find out what the Creative Station can do for you.

As with Xyron’s Create-A-Sticker machine, users can use both permanent and repositionable adhesive with the Creative Station. The adhesives are available on rolls (also known as cartridges), as are the materials needed to laminate and make magnets. The Creative-Station 900 can accommodate items up to 9 inches wide and the materials you can use with this machine are endless. Photos, fabric, cardstock, ribbon, and fancy paper can all be used with the Creative Station. And the operation of the machine couldn’t be simpler. All you need to do is feed your item into the machine, turn the crank, and then trim down your work.

Also, this laminator doesn’t require electricity (thus making it a cold laminator) nor does it need batteries, so it’d be a good machine to have in places where children are present. Although the Creative-Station seems like it would mainly be good for homes, schools, or daycare centers, businesses could find many uses for the machine as well, especially since the machine produces high-quality cold lamination for a reasonable price (under $120). Artists and graphic designers could also find uses for this machine. The Creative-Station 900 laminator has something to offer almost everyone.

There are a couple of drawbacks to the Creative Station Laminator. For instance, replacement cartridges of laminate, adhesive, etc. are a bit expensive, going for about $35 a pop. The Creative Station itself is already somewhat pricey, so perhaps the additional cost of the supplies will be off-putting for people who are on a budget. Also, some users may find it difficult or annoying to have to change the cartridges when they switch from laminating to making stickers to creating magnets. Finally, some people might get frustrated with the 9″ opening, which makes it impossible to laminate or otherwise create large projects. A laminator or crafting machine with a larger throat will be needed, if that’s the case.

Nevertheless, the Xyron 900 Creative Station’s benefits outweigh its limitations. This is a powerhouse machine that has a lot of offer and anyone with a creative streak will find something to love about it. The Creative Station will definitely appeal to scrapbookers and the like, but businesses will be able to find a use for it, too. How many machines can you say that about?

Questions & Answers
No question have the been asked yet.
* Nickname:

* Your Answer:


Sign Up for Newsletter

Submit a New Question

Submit