Spinnit Manual Lift Three Spindle Paper Drill (FMM-3)
- The lowest priced 3 spindle drill on the market
- 2" drilling capacity
- Easy to adjust moveable head design
- Rugged mechanical lift table which smoothly traverses in either direction
- Built for ease in operation and maximum production performance
- Table size: 15" x 32"
- Base footprint: 15" x 15"
- Table height: 35-1/2"
- Overall height: 52"
- Overall width: 32"
- Overall depth: 26"
- Max drilling capacity: 2"
- Motor: 3/4 HP, 115 Volts
- Shipping dimensions: 48" x 40" x 60"
- Ships via: LTL Truck
- Warranty: 1 year parts and labor excluding consumables
Caring For And Adjusting FM-2 - Lassco Spinnit FM-2 Manual L
Lassco Wizer Spinnit FMM-3 Manual Lift Three Spindle Paper Drill Review
If you're in the market for a three spindle paper drill, one device that will probably fit your needs is the Lassco Wizer Spinnit FMM-3. This is a first-rate machine that can help you process a lot of paper quickly and it's packed with great features. Let's take a look at its strengths and weaknesses to see if it's right for you.
Most paper drills tend to have the terrific ability to drill through 2 inches of material and the FMM-3 is no exception. A typical ream of paper contains 500 sheets and is about 2 inches tall, so you're going to be able to drill hundreds of sheets in just a few seconds. Imagine how much time that will save you.
This is a three spindle drill so you'll be able to drill three holes at once to produce the three-ring pattern needed for most binders. If you were using a single spindle device, you'd have to drill each hole separately which can be a pain.
The FMM-3 has a roomy 15" x 32" table so you'll be able to punch both letter- and legal-sized paper with ease. The table can traverse in both directions for your convenience.
Each one of the drilling heads is moveable so you can adjust them to your preference.
The FMM-3 is a manual device which helps keep it more affordable that a hydraulic or pneumatic machine. This machine is operated by a foot pedal and when you press on it, the drill bits will come down. Since this device is manual, you'll also have more control over the entire process so you'll be able to get the results you need.
This is one of the most affordable three spindle paper drills currently on the market. Plus, it comes with a one-year warranty so you're protected in case something goes wrong with the machine.
The FMM-3 isn't really a good choice for smaller workplaces because of its size. Its dimensions are 52" x 32" x 26" so you're going to need a good amount of floor and wall space for it. Also, this machine is blue and it might be a bit of an eyesore for some people.
As you probably expected, this machine is heavy, tipping the scale at 275 pounds. Due to its weight, it needs to be shipped on a truck, so you might find the shipping costs a bit high.
The Lassco Wizer Spinnit FMM-3 is a great three spindle paper drill and it's a fantastic choice if you need a device such as this for your workplace. This machine has the ability to process hundreds of sheets at a time and because it has three spindles, all three holes will be drilled simultaneously. You can use this machine to process both letter- and legal-sized paper and you can even adjust the position of the drilling heads. Although this device is very large and heavy, you shouldn't let that dissuade you from purchasing it. So check out the FMM-3 today so you can see what it can do for you.