Need Help 1-800-944-4573 1-800-944-4573
Xyron 2500 Two-Sided Thermal Sensitive High Gloss Laminating Roll Set - 300'
$208.99 NewCondition InStock
Xyron 2500 Two-Sided Thermal Sensitive High Gloss Laminating Roll Set - 300'

Xyron 2500 Two-Sided Thermal Sensitive High Gloss Laminating Roll Set - 300'

Part #: DL404-300
0 Questions, Ask a Question
Brand: Xyron

Your Price: $208.99

Retail: $286.82

You Save: 27%

Brand New Price Match Guarantee In Stock Free Shipping
Main Features:
  • Non-toxic, acid-free thermal print sensitive laminate
  • Length: 300'
  • No heat, no mess and no waiting.
  • Easily installed into machine - easy to switch applications

Related Products for Xyron 2500 Two-Sided Thermal Sensitive High Gloss Laminating Roll Set - 300' - Laminating Cartridges (DL404-300)

  1. Drytac MHL Gloss 3mil 25" x 500' Low Temp Thermal Laminating Film - Low Melt

    Part number: MGD25503

    • MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.

    List Price: $215.74

    Your Price: $151.02

    You Save: 29%

  2. Drytac MHL Gloss 3mil 38" x 500' Low Temp Thermal Laminating Film - Low Melt

    Part number: MGD38503

    • MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.

    List Price: $327.92

    Your Price: $229.54

    You Save: 30%

  3. Drytac MHL Gloss 3mil 43" x 500' Low Temp Thermal Laminating Film - Low Melt

    Part number: MGD43503

    • MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.

    List Price: $371.02

    Your Price: $259.71

    You Save: 30%

  4. Drytac MHL Gloss 3mil 51" x 500' Low Temp Thermal Laminating Film - Low Melt

    Part number: MGD51503

    • MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.

    List Price: $440.10

    Your Price: $308.07

    You Save: 30%

  5. Drytac MHL Gloss 5mil 25" x 250' Low Temp Thermal Laminating Film - Low Melt

    Part number: MGD25205

    • MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.

    List Price: $209.76

    Your Price: $146.83

    You Save: 30%

ProductXyron 2500 Two-Sided Thermal Sensitive High Gloss Laminating Roll Set - 300' - Laminating Cartridges (DL404-300)

This roll set is designed specifically for use with your Xyron 2500 Professional cold process laminator. The two-Sided Laminate ensures a premium high-gloss result with an elegant finish, and is suitable for use on thermal print sensitive items. A number of roll sets are available for the Xyron 2500 Pro laminator including roll sets for 2 sided lamination, permanent adhesive application, repositionable adhesive application and one sided lamination with adhesive backing. No heat, electricity or batteries are required. The wide variety of options available for the Xyron 2500 make it ideal for creating mock-ups, story boards, and posters. Plus, the fact that the Xyron 2500 doesn't require heat makes it one of the safest laminating options available on the market.

Product Details

  • Dual Roll Set is easily installed into machine - easy to switch applications
  • Suitable for use on thermal print-sensitive items
  • No heat, no mess and no waiting.
  • Cold lamination will allow for trimming right up to and even through documents without any peeling or lifting.
  • Non-toxic, acid-free thermal print sensitive laminate

ItemSpecifications

  • Roll Set Type: Thermal Sensitive Two Sided Lamination
  • Length: 300'
  • Width: 24.9"
  • Weight: 23 lbs
  • Part Number: DL404-300

ProductReviews

2 Review(s)
image alt text

Reviewed on 4/2/2018

5 star Review by James

easy to use. nice clear after laminate.

image alt text

Reviewed on 3/29/2018

4 Stars Review by John

Great price

2 Item(s)

per page

DemonstrationVideo

Transcript: Welcome to MyBinding Video. Let’s have a look at Xyron’s Acid-Free Two-Sided High Gloss Laminate Roll Set, built for your Xyron 2500. A strength of this machine is its flexibility. For this particular roll set, you can do double-sided, clear, high gloss lamination. Let’s watch it in action. Double-sided lamination keeps things protected. So for brochures or artwork or things you need to preserve for a long time, this is a great choice. And double-sided keeps things nice and protected and can stave off further damage better than anything. At 25 inches wide you can laminate large things li... Read More

Welcome to MyBinding Video. Let’s have a look at Xyron’s Acid-Free Two-Sided High Gloss Laminate Roll Set, built for your Xyron 2500. A strength of this machine is its flexibility. For this particular roll set, you can do double-sided, clear, high gloss lamination. Let’s watch it in action. Double-sided lamination keeps things protected. So for brochures or artwork or things you need to preserve for a long time, this is a great choice. And double-sided keeps things nice and protected and can stave off further damage better than anything. At 25 inches wide you can laminate large things like maps or large paintings or posters, anything that’s a keeper and because there is no heat involved, heat-sensitive documents like photos are no problem. And that is the double-sided lamination rolls by Xyron. For more demos, reviews, and How-To’s check out MyBinding.com.

Questions & Answers
No question have the been asked yet.
* Nickname:

* Your Answer:


Sign Up for Newsletter

Submit a New Question

Submit