Renz WBS 360 Modular Manual Wire Closer
445.71 NewCondition InStock
Renz WBS 360 Modular Manual Wire Closer (RZWBS360)
SWIPE FOR MORE IMAGES
The Renz WBS 360 Modular Manual Wire Closer is a wire binding module that can be used as a stand alone machine or attached to a Renz DTP 340 M to create a full wire binding system. Can close Renz ring wire elements from 3/16" to 1 1/2" independent of pitch, working width 360 mm.
- Manual Closing Machine for Wire Binding
- Closes wire elements from 3/16" to 1-1/2" in diameter
- Bind up to 250 sheets of paper with a 1-1/2" diameter wire
- Change diameters in seconds
- Use as a stand alone work station with the purchase of the Renz Modular Holder
- Forms a productive punch and binding system when mounted to the Renz DTP 340M
- Pitch: 4:1, 3:1 and 2:1
- Binding Thickness: 1 - 34 mm
- Binding Element Ø: 6.9 - 38 mm (1/4" - 1 1/2")
- Min. Binding Width: 10 mm
- Max. Binding Width: 360 mm
- Min. Unbound Edge: 65 mm
- Max. Unbound Edge: 600 mm
- Binding Operation: Manual
- No. of Books Output: 250 Sheets/hr
- No. of Calendars Output: 200 Sheets/hr
- Calendar Hangers: Loose
- Machine Dimensions L x W x H: 560 x 150 x 320 mm
- Machine Weight: 8.5 kg
- Machine Packing dimensions L x W x H: 630 x 360 x 210 mm
- Machine Weight with packing: 10.5 kg
- Warranty: 1 Year Manufacturer Warranty
- Part Number: RZWBS360
Write Your Own Review
Transcript: WBS 360. Place the wire onto the front of the machine. Load document onto wire. Position the wire into the back of the closing mechanism. Pull lever down. To adjust to a different size wire, half turn, slide, lock off. Renz.
WBS 360. Place the wire onto the front of the machine. Load document onto wire. Position the wire into the back of the closing mechanism. Pull lever down. To adjust to a different size wire, half turn, slide, lock off. Renz.
Can this machine close non-Renz branded twin wires? Also, what is the "Renz Modular Holder" that needs to be purchased to make this a stand alone station?
Asked by Melissa Oberle
The Renz WBS 360 Modular Manual Wire Closer will work with any brand of Twin Loop wires. The Renz Modular Holder is used if you want to use the Wire Closer as a stand alone device, or if you don't have a DTP punch then you will need this module holder to hold the module in place while you use it. This special metal stand is made of heavy duty metal and is sturdy enough to hold the piece of finishing equipment in place while you use it.
Answered by MyBinding
Asked by Melissa Oberle
This is a wire closer meant to bind standard books. It does not punch the holes but will close the wire. If you need assistance picking a wire machine, please feel free to contact us at 800-944-4573.
Answered by Mybinding.com