Artshield Emerytex Pebble Textured UV 5mil 51" x 50' Overlaminating Film
153.41 NewCondition InStock
Drytac Artshield Emerytex Pebble Textured UV 5mil 51" x 50' Overlaminating Film (ET51050PP)
SWIPE FOR MORE IMAGES
This Artshield Emerytex UV 51" x 50' Overlaminating Film is a 5mil Heatset PVC (vinyl) scuff-resistant, pebble textured matte laminating film that provides excellent UV protection. This 51" x 50' Artshield Emerytex UV is perfect for images that will be displayed in high traffic areas and/or subject to extensive handling, such as mouse pads, place mats, trade show displays, and more.
- Finish: Pebbled Textured Matte
- Film Length: 51"
- Film Width: 50'
- Film Thickness: 5mil
- Base Film: 4.0 mil (100 micron) PVC (vinyl)
- Adhesive: 1.0 mil (25 micron) acrylic
- Release Liner: Moisture stable paper
- Initial Tack: Low
- IApplication Temperature: 185Â°F-210Â°F (85Â°C-99Â°C)
- Dwell Time: 4-10 minutes
- Application: Fine Art Prints, Picture Framing/Photography
- Part Number: ET51050PP
People Who Viewed Also Viewed
Write Your Own Review
Artshield Emerytex is a 4 mil (100Âµ) embossed, UV stabilized, pre-perforated clear PVC laminating film with a matte pebble textured finish, coated on one side with a heat activated solvent acrylic adhesive that is protected by a moisture stable bleached Kraft gridded release paper coated on one side with siliconized PE.
- Ideal for images that will be displayed in high traffic areas or are subject to extensive handling, such as mouse pads, placemats or tradeshow displays.
|Film||Matte Pebble Textured Perforated PVC|
|Adhesive||Solvent Acrylic (Heat Activated)|
|Release Liner||1 Side PE Coated Bleached Kraft Grid Paper (Moisture Stable)|
|Film Thickness||4 mil (100Âµ)|
|Adhesive Layer||1 mil (25Âµ)|
|UV Protection Factor||Film contains UV stabilizers, which prevent film degradation and provide UV protection to the underlying image|
|Outdoor Durability||Not Applicable|
|Service Temperature Range||-4Â°F to 203Â°F (-20Â°C to 95Â°C)|
|Peel Strength (20 min, FTM1)||18 N/25mm|
|Shelf Life||Use within 1 year after opening original box|
|Storage Conditions||59Â°F to 72Â°F (15Â°C to 22Â°C); 50 - 55% Relative Humidity|
|Equipment Type||Temperature||Dwell Time|
|Roller Laminator||Not recommended|
|Press||185Â°F to 210Â°F (85Â°C to 99Â°C)||4-10 minutes|