Luxor 24" x 36" Reversible Mobile Steel Magnetic Whiteboard
114.67 NewCondition InStock
Luxor 24" x 36" Reversible Mobile Steel Magnetic Whiteboard (L270)
SWIPE FOR MORE IMAGES
|Product Name||Item Number||Price||Qty|
|Luxor 30" x 40" Reversible Mobile Steel Magnetic Whiteboard||MB3040WW|
This Luxor 24" x 36" Reversible Mobile Steel Magnetic Whiteboard doubles the writing space and provide the mobility needed in a fast paced and ever-changing environment. The steel frame's slender footpring is ideal for both a professional appearance and a conservative space. When your board is ready for use, locking brakes and side knobs steady the frame for writing or presenting. To display additional charts, photos, etc., allow the magnetic surfaces to operate as a bulletin board. The traditionally shaped boards is well-suited for any school or business with conference areas, classrooms, and shared spaces. Easily flip the reversible board for twice the writing area. Magnetic surfaces allow users to dispaly papers or posters. 1" aluminum frame gives professional and clean appearance. Take advantage of great mobility with four casters and two locking brakes. Full length marker/eraser tray provides ample room for board materials.
- Whiteboard on both sides.
- Aluminum frame around board.
- Chrome finish on frame.
- Both sides are magnetic.
- 4 Casters for easy mobility.
- 10 year warranty on whiteboard.
People Who Viewed Also Viewed
- Best-Rite Rubber Tak Bulletin Board with Aluminum Trim
Starting At: $37.79
- Quartet Natural Cork Bulletin Board
Starting At: $31.89
- Quartet Standard Black Classroom Chalkboard
Starting At: $250.19
- Quartet Infinity Glass Black Magnetic Frameless White Board
Starting At: $60.99
- Quartet Adjustable Single Pedestal Letter Board
Starting At: $196.39
- 42" x 24" White Dry Erase/Black Chalkboard Signage Easels
Starting At: $47.72
- Board Size: 24"W x 36"H
- Size with Frame: 27"W x 21"D x 59"H
- Surface Material: Magnetic
- Frame Material: Aluminum
- Frame Finish: Chrome
- Casters: Yes (4)
- Warranty: 10 years
Write Your Own Review
Luxor/H. Wilson - Mobile Whiteboard Assembly Video
Transcript: Today we're going to learn how to assemble a mobile whiteboard by Luxor. Here you see depicted the various hardware that will be used. Position one of the long vertical supports on a table, take the short horizontal support and line it up by placing the long bolt with washer through. After you sufficiently tighten the bolts by hand use the wrench that was included in the hardware pack to complete the assembly. Next, insert a small washer on the end of the caster stem take the caster with washer and thread it on to the bottom of the short support. Tighten the nut by hand, turning the nut clockw ... Read More
Today we're going to learn how to assemble a mobile whiteboard by Luxor. Here you see depicted the various hardware that will be used. Position one of the long vertical supports on a table, take the short horizontal support and line it up by placing the long bolt with washer through. After you sufficiently tighten the bolts by hand use the wrench that was included in the hardware pack to complete the assembly. Next, insert a small washer on the end of the caster stem take the caster with washer and thread it on to the bottom of the short support. Tighten the nut by hand, turning the nut clockwise while holding the caster still. Once you've sufficiently tightened the caster, again use the wrench included with your hardware pack. To secure the nut tightly against the bottom once you've finished assembling both sides take the lower bottom support and position it next to one of the fully assembled supports. Insert the bolt through the hole on the vertical support and line up the bottom support by passing the bolt through. Once we have the parts lined up, take one of the large washers and locking nut and secure it in place. When attaching the nut to the bulb, make sure to put the widest section the nut against the washer and the part with the rubber gasket away from the bolt head. Use the same approach to fasten the bolt to the hole at the bottom of the support as well. For ease of assembly, and to tighten the nuts it's recommended to use two wrenches. Use the same approach to fasten the bolts, washers, and nuts to the other side. Depending on the model purchased, you might have to pre-assembled the tray to the center section with the sheet metal screws provided according to the instruction sheet. Next, locate the center section that includes the tray in your spring release and locking ring, attach the locking ring to the hole that's been pre-drilled into the underside of the spring release. Take the center tray with the spring release that's been attached and line it up with the middle of the pre-built unit, line up the holes, and again use the short bolt, large washer and locking nut to begin assembling your component. It's recommended that you fasten the top section on one side and then the top section on the other, before assembling the bolts washers and nuts. Depending on the model you purchase, you might have to pre assemble the components of the knob according to the instruction sheet. Slide the knob through the hole on the top of the vertical support, line up the slip nut and small washer with the hole of the threaded insert that's been pre-attached to the side of the whiteboard. Once you've lined up the components turn the knob clockwise screwing it through the assembly into the side of the whiteboard. Carefully remove the plastic protective cover from the front surface of the whiteboard once the whiteboard has been assembled, you can test the spring release by pulling down on the ring. Your mobile whiteboard by Luxor is now ready for use. For downloadable instruction sheets and more visit luxorfurn.com.