WindowTac Pressure Sensitive Mounting Adhesive
33.33 542.43 5

Drytac WindowTac 51" x 164' Pressure Sensitive Mounting Adhesive (PWD51164)

Brand: Drytac
1 Questions, 1 Answers
  • Clear, double-sided mounting adhesive with an embossed release liner
  • Provides additional UV protection for graphics printed with dye-based or pigmented inks
  • Excellent clarity without bubbles or wrinkling
  • Micro-grooves in the removable adhesive allow for easy air evacuation with a squeegee
Starting At

$33.33

Choose Product Below

Product Description

This WindowTac is composed of a clear 2 mil PVC (vinyl), coated on one side with a removable and repositionable aqueous adhesive and a permanent solvent acrylic adhesive on the other side. This repositionable adhesive is protected by a semi-clear, embossed filmic liner with a blue grid pattern. The grid transfers an embossed pattern into the adhesive coating. The permanent adhesive side is protected by a white silicone coated paper liner. The Windowtac was specifically designed to make facemounting on glass easy. No bubbles, no wrinkles, and no need for a wet application using a "soapy" concoction. The micro grooves in the removable adhesive allow easy air evacuation which facilitates standard application using a squeegee or burnishing pad. WindowTac can also be used in "non-facemount" hand applications. Apply the smooth permanent adhesive side to the back/rear of the print and the textured side to the mounting surface.

Product Details

    Features:

  • Clear, double-sided mounting adhesive with an embossed release liner
  • Micro-grooves in the removable adhesive allow for easy air evacuation with a squeegee
  • Excellent clarity without bubbles or wrinkling
  • Provides additional UV protection for graphics printed with dye-based or pigmented inks


    Benefits:

  • Transforms any printed image into an easy-to-install window graphic or decal
  • Graphics can be dry installed, cleanly removed and easily repositioned during installation
  • Suitable for double-sided window graphics
  • Ideal for face mounting of temporary graphics to glass, acrylic and other non-porous surfaces
  • Ideal for short-term promotional window advertising and POP displays

Item Specifications

  • Roll Width: 25.5"-54"
  • Roll Length: 15' or 164'
  • Core Size: 3"
  • Laminate Type: WindowTac Adhesive
  • Filmic Carrier: 2.0mil (50 micron) clear PVC
  • Adhesive Bond: Permanent one side, Removable the other
  • Initial Tack: High / Moderate
  • Application Speed: 1' - 6' per minute for the permanent side using a roller laminator
  • Adhesive Base: Permanent Solvent Acrylic and Removable Aqueous Acrylic
  • Application Temp: Room Temperature - 120F (49 C)
  • Release Liner: Moisture-Stable paper (100 gsm) on permanent side. Filmic textured release liner with blue grid on removable side.

Product Reviews

Write Your Own Review
You're reviewing:WindowTac Pressure Sensitive Mounting Adhesive
Your Rating

Specifications

Part NumberRoll WidthRoll LengthFilm CarrierLaminate Type
PWD2516425.5"164'2 milWindowTac Adhesive
PWD4116441"164'2 milWindowTac Adhesive
PWD5116451"164'2 milWindowTac Adhesive

Technical Data

WindowTac is a 0.9 mil (23µ) visually clear PET film, coated on one side with a pressure sensitive, removable adhesive that is protected by a micro-grooved PE release liner that imparts an embossed pattern onto the adhesive coating. The other side is coated with a pressure sensitive, aggressive permanent adhesive that is protected by a bleached Kraft release paper coated on both sides with PE and siliconized on the release side. The film contains UV stabilizers, which protect against UV degradation, and the micro-grooves in its adhesive allow for easy air evacuation.

Typical Applications
  • Recommended for face mounting graphics onto glass, acrylic and other non-porous surfaces.
  • Can be used for backlit displays.
  • Can be re-positioned up to 10 times in the first 12 hours and cleanly removed within 12 months after application.
  • Can be used on media printed with all common print technologies, including (Eco) Solvent, Latex and UV.

Product Structure

Release Liner2 Side PE Coated, 1 Side Siliconized Kraft
AdhesivePermanent Acrylic (Pressure Sensitive)
FilmVisually Clear PET
Release LinerEmbossed HDPE


Physical Characteristics

Film Thickness0.9 mil (23µ)
Adhesive Layer1 mil (25µ) permanent 0.6 mil (14µ) removable
Film/Adhesive Ratio1:0.9:0.6
UV Protection FactorUV Stable
Outdoor DurabilityNot Applicable
Service Temperature Range-4°F to 248°F (-20°C to 120°C)
Peel Strength (20 min, FTM1)22 N/25mm (permanent - glass) 3 N/25mm (removable - glass)
Shelf LifeUse within 1 year after opening original box
Storage Conditions59°F to 72°F (15°C to 22°C); 50 - 55% Relative Humidity


Process Settings

Equipment TypeTemperatureDwell Time
Roller Laminator Room temperature to 104°F (40°C)1 ft to 8 ft (0.3m to 2.5m) per minute
PressNot recommended

Prior to application, clean the mounting substrate with soap and water. Rinse thoroughly with water and wipe dry with a lintfree cloth. Window cleaners are not recommended.

Questions & Answers

Thank you for your questions. Unfortunately the WindowTac Pressure Sensitive Mounting Adhesive is only available by the roll and we do not have anything similar in sheet form.

Answered by MyBinding
1 years and 9 months ago ago

Submit a New Question