MHL Scribe 3mil 51" x 500' Dry Erase Laminating Film
351.19 NewCondition InStock

Drytac Clear MHL Scribe 3mil 51" x 500' Dry Erase Laminating Film (MS51503)

Part #: MS51503
Brand: Drytac
  • Film Finish: Gloss
  • Core Size: 3"
  • Film Thickness: 3.0mil
  • Hot or Cold: Hot
Additional Sizes Below
  • Price Match Guarantee
  • Free Shipping
  • Brand New
In Stock


Buy Now - Pay Later

From $32.49 a month

with Credit Key

Qualifies for FREE Shipping!*
  • 0
  • 1
Product NameItem NumberPriceQty
MHL Scribe 3mil 38" x 500' Dry Erase Laminating FilmMS38503

Product Description

MHL Scribe 3mil 51" x 500' is an economical thermal overlaminating film with a dry-erase gloss finish. It can be written on with black dry-erase markers and wiped clean with a dry cloth or eraser. The most common applications for MHL Scribe include re-usable presentation boards, schedules, vacation planners, maps and courtroom displays. MHL Scribe can also be used in conjunction with Ferro to create dry-erase magnet-receptive calendars and coaches play boards. However, MHL Scribe is not recommended for coated inkjet output with high ink coverage or for use with colored dry-erase markers. Protac Scribe would be a superior choice for such applications. Get 51" x 500' of 3mil MHL Scribe Dry Erase film with every order. Product number MS51503.

Product Details

  • Film Width: 51"
  • Film Length: 500'
  • Film Thickness: 3.0mil
  • Core Size: 3"
  • Finish: Dry-erase Gloss
  • Base Film: 0.75mil (19 micron)
  • Adhesive: 2.25 mil (56 micron) polyethylene copolymer
  • Initial Tack: None
  • Application Speed: 2' - 10' per minute
  • Application Temperature: 210 F - 240 F
  • Release Liner: None

Item Specifications

  • Specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators
  • Co-extruded for a carefully balanced ratio of polyester film to adhesive.
  • Higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out).
  • Available in a variety of thicknesses and finishes from standard gloss and lustre finishes to scratch-resistant films suitable for outdoor applications
  • Suitable for both single sided and double sided laminating (encapsulation) of photographic, electrostatic, inkjet-bond, xerographic and lithographic output, as well as many more applications.
  • Incorporate UV absorbers for excellent protection from damaging UV rays.

Product Reviews

Write Your Own Review
You're reviewing:MHL Scribe 3mil Dry Erase Laminating Film
Your Rating

Tips and Technical Data

Tips For Applying MHL UV Thermal Films:

  • Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down.
  • Co-extruded for a carefully balanced ratio of polyester film to adhesive.
  • Use your idler bar to increase the area of contact between the heated rollers and the film.
  • To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results.
  • MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.

Technical Data

MHL Scribe is a 3 mil (75µ) high clarity, abrasion-resistant PP thermal laminating film with a gloss fi nish. The film is engineered with a specially formulated copolymer thermal adhesive for a low melt-point for single-sided lamination. With its dry erase characteristics, black dry erase markers can be wiped clean with a dry cloth.

Typical Applications
  • Ideal for laminating book jackets, report covers and other specialty applications.
  • Suitable for courtroom displays.
  • Can be used for short-term dry erase boards.

Physical Characteristics

Film Thickness3 mil (75µ)
Film/Adhesive Ratio0.5:2.5
Processing Temperature210°F to 230°F (99°C to 110°C)
Shelf LifeUse within 1 year after opening original box
Storage Conditions59°F to 72°F (15°C to 22°C);50 - 55% Relative Humidity

Questions & Answers

Submit a New Question