SealerSales HL-M810II Vertical Dry Ink Coding Continuous Band Sealer
1355.36 NewCondition InStock
SealerSales Vertical Dry Ink Coding Continuous Band Sealer (HL-M810II)
SWIPE FOR MORE IMAGES
This SealerSales HL-M810II Vertical Dry Ink Coding Continuous Band Sealer is the same great unit as the HL-M810I band sealer except this unit provides a wider seal width (15mm vs the standard seal width of 8mm). The HL-M810II is also similar to CBS-880 except the feeding is on the left side and this unit is equipped with a hot ink coding imprinter to print numbers or letters on the seal line. It is suitable for sealing any thermoplastic materials and bags. This sealer can seal 20-30 pcs of 6" wide poly bags in one minute. Can be used in a variety of fields such as the food, medical, and cosmetic industries.
- Durable stainless steel construction.
- Easy to operate - minimal operator training.
- Fast warm up time.
- Solid state temperature controller to maintain seal bars at proper temperature for consistent seal quality.
- Fully adjustable conveyor (the conveyor height and depth in relation to seal bars can be adjusted).
- Motorized rubber conveyor for speed control.
- Knurled pressure rolls with variable pressure adjustment.
- Sealing method - constant/direct heat accompanied with a pair each of cooling and heating blocks.
- Dry ink coding allows for printing on the seal line.
- Unit feeds Left to Right.
- Special 15mm Seal Width (standard is 8mm).
- Spare Kit includes: PC Board, PTFE belt, wheel belt, fuse, motor brush, heating element, silica gel ring, silicone pin, tweezers, and type set.
- Minimum and maximum bag heights when the bag is filled: Min: 7.8" / Max: 12.0".
- Stainless steel stand for horizontal models.
- Dry ink coding – Font size - 10.5PT.
- Shipping: via freight only.
- Power: 110V/60Hz
- Motor Power: 50W
- Sealing Speed: 0-472 Inches/Minute
- Seal Width: 15mm
- Temperature Range: 0-300°C
- Sealing Power: 300 x 2
- Conveyor Size: 37" x 6"
- Max Conveyor Load: 6.6 lbs.
- Bag Size (Filled) - Vertical Unit: Minimum - 7 7.8" / Maximum - 12"
- Character Size: Two Types Available (R-Type: 18PT - 2 Lines; Option: 10.5PT - 3 Lines)
- Printing Heating Power: 40 x 2
- Printing Options: 20 Character/Line
- Dimensions: 37" x 16" x 17"
Write Your Own Review
Asked by Bob
This machine would be a special order, and would take about 10-12 weeks to produce once ordered. Please give us a call at 800-944-4573 if you would like a quote.
Answered by myBinding.com
Unfortunately, there is not a machine that punches the hole as well.
Answered by MyBinding.com