MediaTac 25.5" x 15' Pressure Sensitive Aqueous Adhesive
35.7143 NewCondition InStock

Drytac MediaTac 25.5" x 15' Pressure Sensitive Aqueous Adhesive (PSA26-25015)

Part #: PSA26-25015
Brand: Drytac
1 Questions, 1 Answers
  • Film Finish: Clear Polyester
  • Core Size: 3"
  • Thickness: 0.5 mil
  • Hot or Cold: Hot
Additional Sizes Below
  • Price Match Guarantee
  • Ships Free Over $75
  • Brand New
In Stock

$35.71

FREE shipping for orders over $75*
SWIPE FOR MORE IMAGES
  • 0
  • 1

Product Description

This 25.5" x 15' MediaTac consists of a smooth coating of Drytac's aqueous acrylic adhesive on both sides of a 0.5 mil polyester film carrier. The adhesive's new non-slip release liner allows boards pre-coated with MediaTac to stack safely without slippage. The 25.5" x 15' MediaTac adhesive is ideal for image decal and high volume mounting applications. This adhesive can be used for pre-coating mounting boards and for mounting prints to smooth porous substrates such as foam boards, cardstock, GatorFoam and tempered hardboard. All of this makes MediaTac an economical general purpose pressure-sensitive aqueous adhesive with a non-slip release liner. Product number PSA26-25015.

Product Details

  • Roll Width: 25.5"
  • Roll Length: 15'
  • Core Size: 3"
  • Laminate Type: MediaTac Adhesive
  • Filmic Carrier: 0.5 mil (13 micron) clear polyester
  • Adhesive Bond: Permanent
  • Adhesive Base: High
  • Application Speed: 1' - 8' per minute
  • Application Temp: Room Temperature - 120F (49 C)
  • Release Liner: Moisture Stable Paper (60 lbs) (100 gsm)

Product Reviews

Write Your Own Review
You're reviewing:MediaTac Pressure Sensitive Aqueous Adhesive
Your Rating

Technical Data

MediaTac is a 0.5 mil (12µ) clear PET film, coated on both sides with a pressure sensitive acrylic adhesive, one of which is protected by a bleached clay coated Kraft paper siliconized on both sides with a differential release. The adhesive is self-wound on the release liner.

Typical Applications
  • Developed for photo labs where a high grade of moisture stability within the mounting film is required.
  • Ideal for high-volume mounting, including pre-coating boards and image decal applications.
  • Recommended for mounting prints to smooth, porous substrates, such as white display board, foam boards, Gatorfoam, and tempered hardboard.

Product Structure

AdhesiveAcrylic (Pressure Sensitive)
FilmClear PET
AdhesiveAcrylic (Pressure Sensitive)
Release Liner2 Side Clay Coated, 2 Side Siliconized Kraft


Physical Characteristics

Film Thickness0.5 mil (12µ)
Adhesive Layer1 mil (25µ) on each side
Film/Adhesive Ratio1:0.5:1
UV Protection FactorNot Applicable
Outdoor DurabilityNot Applicable
Service Temperature Range-4°F to 248°F (-20°C to 120°C)
Shelf LifeUse within 1 year after opening original box
Storage Conditions59°F to 72°F (15°C to 22°C); 50 - 55% Relative Humidity


Process Settings

Equipment TypeTemperatureDwell Time
Roller LaminatorRoom temperature to 104°F (40°C)1 ft to 8 ft (0.3m to 2.5m) per minute
PressNot recommended

Downloadable Information

Questions & Answers

Submit a New Question