James Burn EX610D Duplex Automatic Punch with Board Feedeer (04JBEX610D)

Product Details

• Duplex Receptions Include:
  • A standard high pile or conveyor reception for inner sheets and standard weight covers.
  • A straight high pile reception unit that is dedicated to card-board applications. As the board does not run through the turnover drums, this guarantees a perfect flatness without any curling. (Note: A board feeder will have to be added to this equipment.)
• The configuration changeover is very easy and both reception devices can be disconnected. The mechanical device is operated by a handle; the electrical device is driven by an on/off switch.
• Advantages:
  • Designed to punch both paper and cardboard, the EX610 with the Duplex Reception enhances the profitability of a print finishing workshop.
  • Improves productivity by 80% as the operations of board punching are currently made on manual machines.
  • The adjustments for board and paper punching are identical, which helps reduce the setting time as well as the requirements in operator training.
  • Perfect alignment of holes between cardboard covers and inner sheets facilitates wire insertion and speeds up binding operation by reducing possible downtime due to mis-alignment.
  • It saves floor space which can be used for other applications (e.g. for binding) and will provide print finishers with increased production capacity and improved material work flow resulting in a better profitability.

• Maximum Format (Binding Edge): 11" (297 mm)
• Minimum Format (Binding Edge): 5" (125 mm)
• Maximum Format (Sheet Length): 9.8" (250 mm)
• Minimum Format (Sheet Length): 4" (102 mm)
• Machine Cycle Speed: 80 cycles/minute
• Maximum Thickness: 2.5 mm
• Tool Change: 2 minutes
• Format Changeover Time: 10 - 20 minutes
• Power Required: 2.5 Kw
• Electric Current: 220/380 Volts - 3 phase
• Air Supply: 6 bar/410/mn
• Dimensions w/High Pile Reception: 9.2' x 3.4' x 4.6' (2.8 x 1.04 x 1.4 m)
• Weight w/High Pile Reception: 2650 lbs. (1200 kg)