Need Help 1-800-944-4573 1-800-944-4573
Challenge Titan 200BC 20" Electric Paper Cutter with Tilt Shield
$11,245.00 NewCondition InStock
Challenge Titan 200BC 20" Electric Paper Cutter with Tilt Shield

Challenge Titan 200BC 20" Electric Paper Cutter with Tilt Shield

Part #: CH-TITAN200BC
0 Questions, Ask a Question
Brand: Challenge

Your Price: $11,245.00

Brand New Price Match Guarantee In Stock Oversize / Truck shipping 1 Year Warranty
Main Features:
  • 20" Cutting Width, 3-1/4" Clamp Opening
  • Hydraulic Clamping & Cutting
  • Adjustable Clamp Pressure
  • Line-Light Cut Position Indicator

Related Products for Challenge Titan 200BC 20" Electric Paper Cutter with Tilt Shield - Equipment (CH-TITAN200BC)

  1. Challenge Spartan 185A 18.5' Automatic Electric Paper Cutter - Equipment

    Part number: CH-SPARTAN185A

    • Electric Power Clamping: Generates over 3000 lbs (1,360 kg) of clamping force
    • Independent Clamping Function: Allows for a "clamp only" operation
    • Manual Backgauge Control: Hand Wheel Control
    • LED Digital Backgauge Position Indicator: With +/-0.01" (+/-0.1mm) backgauge accuracy - provides for easier operator interface, higher productivity, and easier repeatable accuracy than a hard to read indicator on a scale as is used with other brands.

    Your Price: $9,895.00

  2. Challenge Spartan 150SA 15.75" Semi Automatic Electric Paper Cutter - Equipment

    Part number: CH-SPARTAN150SA

    • Power Cutting: Electric power - 1/2HP Gear Drive Motor
    • Manual Clamping: Hand crank wheel system provides over 200% more clamping force than the lever clamping system. RESULT - a better cut.
    • Safety Guards: Safety covers over the front table (the cutting area) and rear table.
    • Safety Dual Cut Buttons: Requires the simultaneous use of both hands to operate.

    Your Price: $4,745.00

  3. Challenge Spartan 150A 15.75" Automatic Electric Paper Cutter w/ Power Clamp - Equipment

    Part number: CH-SPARTAN150A

    • Power Cutting: Electric power - 1/2HP Gear Drive Motor
    • Automatic Power Clamping: Automatic power clamping improves productivity and makes cutting simple. All you need to do is lower the safety shield and press the two cutting buttons..
    • Safety Guards: Safety covers over the front table (the cutting area) and rear table.
    • Safety Dual Cut Buttons: Requires the simultaneous use of both hands to operate.

    Your Price: $5,245.00

  4. MBM Triumph 4850 18.625" Electric Paper Cutter with Digital Display

    Part number: MBM-4850

    • Cutting Width: 18 7/8inch Cutting Height : 3inch Narrow Cut : 1 1/4 " Cutting Length Behind Blade: 17 11/16inch Table Length in Front of Blade: 13 5/8inch Motor: 2 hp Power Supply: 115 V, 60 Hz Dimensions: 38 1/4inchx29 3/4inchx48 1/2inch Shipping Weight: 556 lbs. Warranty: 1Year Manufacturer Warranty

    Your Price: $8,999.00

  5. Standard Semi Automatic 17.5" Electric Paper Cutter

    Part number: PC-450

    • Safety Sequence Circuitry & Safety Mechanism: The knife is actuated by two-hand throw in switches. So, if either one of the two switches is released in the middle of cutting, the machine instantaneously stops. Further, the knife automatically moves up to its home position even if the switches are released after the knife has reached its lower dead point.
    • Cutter & Illuminated Cut-Line: The cutting knife made of special steel ensures consistently high standard cutting quality for a prolonged period of time. Further, the built in illuminated cut-line indicator helps you find easily the cut-line without identifying the cut-line each time.
    • Precise Backgauge Travel: The precision-built backgauge lead-screw enables you to make a trim cut as fine as 0.5mm (0.019"). The backgauge is operated by the handcrank at the front-table and can be locked if necessary.
    • Simple Operation: There are no complicated switch controls except the two-hand knife switches. You need only three steps to complete the cutting job: setting up the cut size, clamping the stock, and depressing the two-hand knife switches. That's all.

    List Price: $6,910.00

    Your Price: $6,219.00

    You Save: 10%

  6. Standard Electric 17" Desktop Paper Cutter

    Part number: PC-P430

    • Dual Push Buttons: The PC-P430 is activated only when the safety cover is closed and both cutting buttons are simultaneously pressed. The two buttons are sufficiently spaced to ensure operator safety.
    • Safety Covers: The cutter is equipped with front and rear safety covers. The front cover includes a safety switch to prevent unsafe operation.
    • Press Section: An automatic clamping press moves simultaneously with the cutting knife. A special cutout is provided to prevent book spines from crushing.
    • Cutting Line: Illuminated cut line conveniently identifies the cut position for easy sheet positioning

    List Price: $5,150.00

    Your Price: $4,635.00

    You Save: 10%

  7. Formax Cut-True 22S 17" Electric Paper Cutter

    Part number: FDCT22S

    • Guillotine cutter accurately cuts through paper stacks up to 1.75" high, up to 16.9" wide
    • Semi-automatic with electronically-controlled two-hand operation
    • LED Laser cut line for pinpoint accuracy
    • High-quality hardened steel blade

    List Price: $3,595.00

    Your Price: $3,146.25

    You Save: 12%

  8. MBM Triumph 4315 16.875" Semi-Automatic Tabletop Paper Cutter - Electric Paper Cutters

    Part number: CU0451

    • Cutting width: 16 7/8inch Cutting height: 1 1/2inch Narrow cut: 1 3/8inch Cutting length behind blade: 17inch Table length in front of blade: 9inch Motor: 3/5 hp Power supply: 115 V, 60 Hz Dimensions (D x W x H): 34 5/8inchx25 1/4inchx14 1/8inch (41 1/2inch H with stand, 42 1/2inch H with cabinet) Weight: 196 lbs. (222 lbs. with stand, 291 lbs. with cabinet)

    Your Price: $4,199.00

  9. Duplo Card Cutter - Electric Paper Cutters

    Part number: CC-330

    • Ideal for mid-volume digital print shops or in-plants
    • User-friendly, compact and affordable in price
    • Ideal for full-bleed business card applications with standard slitter cassette
    • Also great for postcard, greeting card, and photo applications with optional slitter cassettes

    Your Price: $9,800.00

  10. Duplo Cut Sheet Burster - Electric Paper Cutters

    Part number: V-417

    • Wide range of paper stock up to 110 lb. index
    • Form sizes up to 11" x 17"
    • Up to 140 sheets per minute
    • Speed control in 5 steps

    Your Price: $5,400.00

ProductChallenge Titan 200BC 20" Electric Paper Cutter with Tilt Shield - Equipment (CH-TITAN200BC)

The Challenge Titan 200BC Electric Paper Cutter with Tilt Shield is a heavy duty electric paper cutter with a manual adjustable backguage and an automatic hydraulic clamping mechanism. The Challenge Titan 200BC offers a twenty inch cutting length and a 3-1/4" clamp opening. The Titan 200BC is manufactured to the highest safety standards available and offers two handed cut operation, a convenient safety shield and a plexiglass rear shield cover. You can even add side tables to expand your work area when cutting. Check out the Challenge Titan 200BC Electric Paper Cutter with Tilt Shield for yourself today.

Product Details

  • 20" Cutting Width, 3-1/4" Clamp Opening.
  • Hydraulic Clamping & Cutting.
  • Has clear plexiglass shield that you have to flip down in order for the cutter to work
  • Adjustable Clamp Pressure.
  • Cutting Area Protection - Plexiglas Safety Shield.
  • Plexiglas Rear Table Safety Shield.
  • Two-Hand Cut Buttons.
  • Line-Light Cut Position Indicator.
  • Manually Controlled Backgauge With Lock.
  • Energy Efficient - Motor Runs Only When Cutting.
  • Heavy Duty Casters For Portability.
  • Rugged Steel & Cast Iron Construction .
  • 12" x 19" Side Tables (optional).

ItemSpecifications

  • Maximum Cutting Width: 20" / 50.8cm
  • Minimum Cut:
    without false clamp plate: 1/2" / 13mm
    with false clamp plate: 1-7/8" / 48mm
  • Maximum Cut Depth: 20" / 50.8cm
  • Clamp Opening:
    without false clamp plate: 3-1/4" / 8cm
    with false clamp plate: 3" / 7.6cm
  • Clamping Method: Hydraulic Power
  • Backgauge Control: Manual
  • Table Space:
    in front of knife: 16" / 40.6cm
    behind knife: 20" / 50.8cm
  • Overall Height: 53" / 135cm
  • Overall Width: 36" / 91cm
  • Overall Length: 51" / 130cm
  • Warranty: 1-Year Parts Warranty (Supplies Excluded)
  • Net Weight (approximate): 755 lbs / 343 kg
  • Shipping Weight (approximate): 950 lbs / 432 kg
  • Electrical: 3/4 H.P. 1 Phase, 60 Hz, AC
    120 Volts, 12 Amps (service size 15 Amps)
    Requires receptacle type: NEMA 5-15R
    U.L. Listed

ProductReviews

There are No Reviews on this Product Yet

Be the first to review this product

DemonstrationVideo

Transcript: Challenge Titan 200 Programmable Guillotines - The Challenge Machinery Company, www.challengemachinery.com. The Titan 200 line of guillotine cutters bridges the gap for many digital and in-plant locations. Solid steel and aluminum construction serves as the foundation for consistent, accurate cutting. Floating backgauge fingers and a bright red LED cut indicator. Swift backgauge positioning and table slot closure device. Monitored knife safety latch inhibits blade drifting. The Titan 200 is available with either category 4 light-beam safety curtains or tilt-shield safety cover. The backgauge p... Read More
Challenge Titan 200 Programmable Guillotines - The Challenge Machinery Company, www.challengemachinery.com. The Titan 200 line of guillotine cutters bridges the gap for many digital and in-plant locations. Solid steel and aluminum construction serves as the foundation for consistent, accurate cutting. Floating backgauge fingers and a bright red LED cut indicator. Swift backgauge positioning and table slot closure device. Monitored knife safety latch inhibits blade drifting. The Titan 200 is available with either category 4 light-beam safety curtains or tilt-shield safety cover. The backgauge programmer for the Titan 200 is extremely powerful yet intuitive for novice operators. Engineered to provide years of dependable service, the Titan 200 is suited for the demands of today's digital or in-plant print providers. Speed, accuracy, and efficiency, the hydraulic cutter that gives you more. Over a century of providing assurance you made the right decision. Challenge Titan 200 Programmable Guillotines - The Challenge Machinery Company, www.challengemachinery.com.
Transcript: Notice: The videos in this collection are an enhancement to the service manual. Please refer to the manual for additional information, specifications and procedures.

We’re doing the blade change of the Titan 200. Your first step is to loosen your quarter 20 screws up above the blade. Just back those all the way out. Once those are out of your way, you loosen your first slotted screw and remove.

Your second slot and remove. This is where your knife handles will be inserted. That’s your first handle. Make sure they’re good and snug so your blade doesn’t slide. Keeps you safe. Once ...
Read More
Notice: The videos in this collection are an enhancement to the service manual. Please refer to the manual for additional information, specifications and procedures.

We’re doing the blade change of the Titan 200. Your first step is to loosen your quarter 20 screws up above the blade. Just back those all the way out. Once those are out of your way, you loosen your first slotted screw and remove.

Your second slot and remove. This is where your knife handles will be inserted. That’s your first handle. Make sure they’re good and snug so your blade doesn’t slide. Keeps you safe. Once they’re tight, take out the rest of your blade screws. To get your blade out or remove it, loosen your handles while still holding pressure up and then bring your knife down. Pull your knife out.

Now, you got your blade out. You loosen the two bolts on your scabbard, your knife carrier, and pull the screws. Dump the blade out. Try not to touch it. These blades are extremely sharp. Load in the dull blade. Put your handles back in the new blade that you’re gonna put in the machine. Move it back. Insert the tie bolts back into the knife carrier. Make sure that your screws are tight for shipping purposes. Then install your new knife.

When installing your new blade, start low on the right hand side, lift your left end up. Be very careful not to chip the edge of your blade. Then slide it into the carrier. Make sure you’re all the way to the top. Tighten your handles. Make sure they’re not gonna slip. And then insert your blade screws. Remove the two handles. Insert the last two remaining screws. Keep them snug, not overly tight, just snug. You do not want your blade to slide in this position. Now that your blade’s in, you’re gonna want to flip your cut stick or put a new cut stick in. Here, I flipped it to a clean side. All ready to go.
Transcript: Titan 200 Accuracy Adjustment

Notice: The videos in this collection are an enhancement to the service manual. Please refer to the manual for additional information, specifications and procedures.

When your actual cut sheet is longer or off from your display, an accuracy adjustment is needed. I use 11 x 17-inch piece of paper to cut over the whole area of a bad gauge. Set my machine to 2 inches. The machine will beep when it's there. Make your cut. Take out my strip. I get my measurement. Right now, my ruler says I'm at 1...
Read More
Titan 200 Accuracy Adjustment

Notice: The videos in this collection are an enhancement to the service manual. Please refer to the manual for additional information, specifications and procedures.

When your actual cut sheet is longer or off from your display, an accuracy adjustment is needed. I use 11 x 17-inch piece of paper to cut over the whole area of a bad gauge. Set my machine to 2 inches. The machine will beep when it's there. Make your cut. Take out my strip. I get my measurement. Right now, my ruler says I'm at 1

StaffReview

Challenge Titan 200M Electric Paper Cutter Review

Heavy-duty paper cutters are very handy when you need to cut a lot of paper quickly. One of the better ones available is the Challenge Titan 200M. Here's what it can offer you. Check it out....

  • The Titan 200BC is perfect for both large and small sheets of paper. This device can cut paper that's up to 20 inches wide, so you'll be able to process all the popular sizes of paper including letter, legal, and tabloid. The table is very roomy (there are 16" of space in front of the blade and 20" behind it) so you'll have a lot of workspace

  • This machine comes with a false clamp plate. When you use it, you'll be able to cut 3 inches' worth of paper which is about 500 sheets. If you choose not to use it, you can slice through a 3.25-inch stack. It just depends on how much pressure you want placed on the sheets. All clamping is hydraulic.

  • The Titan 200BC's backgauge is controlled manually. However, there is an LED display so you'll be able to see its position. There's also a light that will indicate where your paper will be cut so you can re-align it if necessary.

  • Safety is important when using any cutter. Luckily, the Titan 200BC comes with enough features to keep you safe including a plexiglass rear safety shield. You also need to use two hands when operating this machine so your hands will be far away from the blade.

  • This is one of the most energy efficient cutters available. The motor will run only when you're actually cutting so you'll be able to conserve power and lower your energy costs.

  • There are a number of options available for the Titan 200BC including side tables and a foot pedal for mechanical clamping. There's also a 1.5-horsepower motor available. (The device comes with a .75-HP motor.) Unfortunately, the options are sold separately and are pretty pricey so you'll need to consider if they're worth it or not.

  • The Titan 200BC is one of the largest electric paper cutters available. It measures 53" (height) x 36" (width) x 49.625" (length) so it looks pretty intimidating. (It's not, really.) This device weighs 755 pounds so it comes with casters to make moving it around less of a chore.

  • Finally, this trimmer is incredibly durable thanks to it being made out of steel and cast iron. However, Challenge has given this cutter a one-year warranty just in case the unexpected happens.

The Challenge Titan 200BC is a terrific paper cutter and it would be great for just about any workplace needing a heavy-duty device. This machine offers an impressive cutting capacity as well as the ability to slice through hundreds of sheets at a time. You'll find that using this trimmer is very easy and safe, thanks to features such as the manual backgauge and the plexiglass safety shield. It's disappointing that there are extras for this product that are sold separately. You may want to give the cutter a try before investing in them. Overall though, the 200M is great and worth the money, so take a look at it today.


Questions & Answers
No question have the been asked yet.
* Nickname:

* Your Answer:


Sign Up for Newsletter

Submit a New Question

Submit