Product listing: Challenge Handy-Jog Paper Jogger with Check Tray (CH-HANDYJOGCH) to Challenge Titan 200 20" Electric Programmable Cutter with Shield (CH-TITAN200)

Page
View by: Title (A-Z)  |  Title (Z-A)  |  Price (High-to-Low)  |  Price (Low-to-High)  |  Popularity  |  Best Sellers  |  Category  |  Product Number
  1. Challenge Handy-Jog Paper Jogger with Check Tray (CH-HANDYJOGCH)

    • Front Side Loading
    • Three Trays to Choose from - Standard (8.5" x 11"), Check Tray (9.5" x 12") and Large Tray (11" x 17")
    • Up to 11" x 17" stock tray
    • Powerful jogging action
    • Quiet operation
    Part #: CH-HANDYJOGCH

    $539.00

  2. Challenge Handy-Jog Paper Jogger with LargeTray (CH-HANDYJOGXL)

    • Front Side Loading
    • Three Trays to Choose from - Standard (8.5" x 11"), Check Tray (9.5" x 12") and Large Tray (11" x 17")
    • Up to 11" x 17" stock tray
    • Powerful jogging action
    • Quiet operation
    Part #: CH-HANDYJOGXL

    $524.00

  3. Challenge Handy-Jog Paper Jogger with Standard Tray (CH-HANDYJOGST)

    • Front Side Loading
    • Three Trays to Choose from - Standard (8.5" x 11"), Check Tray (9.5" x 12") and Large Tray (11" x 17")
    • Up to 11" x 17" stock tray
    • Powerful jogging action
    • Quiet operation
    Part #: CH-HANDYJOGST

    $494.00

  4. Challenge Hydraulic Single Cornering Machine (CH-RCH)

    • 6 sizes of cornering knives
    • Handles any size sheet
    • 4"/ 10 cm lift capacity
    • Hydraulic powered
    • Precise cutting action
    Part #: CH-RCH

    $5995.00

  5. Challenge iJog Paper Jogger with Air Assist (CH-IJOGAIR)

    • Robust, electro-mechanical jogging action
    • Front-side loading
    • Foot pedal control
    • Adjustable air flow - dial from zero to 112 CFM
    • Two jogging speeds
    Part #: CH-IJOGAIR

    $1849.00

  6. Challenge JF Single Spindle Paper Drill (CH-JFPAPERDRILL)

    • Convenient Foot Pedal Operation
    • 2" Drilling Capacity: Drills up to 2" lifts of stock in a single stroke.
    • 13 Hollow Drill Bit Sizes: Hole sizes range from 1/8" to 1/2" diameters.
    • Auto - Trip Side Guide: For muliple hole patterns, the versatile backguage offers up to four adjustable stop locations (additonal adjustable stops sold separately). The auto-trip feature automatically releases the paper guide to advance to the next stop setting upon the completion of each stroke cycle.
    • Adjustable Margins: Thumb screws easily lock the backgauge to the drill table. To adjust your margins simply loosen the screws and line up the gauge with the dual scales located on the drill table. Hole locations can be drilled up to a 4" margin from the edge of the paper.
    Part #: CH-JFPAPERDRILL

    $2450.00

  7. Challenge Manual Single Cornering Machine (CH-RCM)

    • 6 sizes of cornering knives
    • Handles any size sheet
    • 2"/ 5 cm lift capacity
    • Manual operation
    • Precise cutting action
    Part #: CH-RCM

    $2995.00

  8. Challenge Mini Padder Portable Padding Press (CH-MINIPADDER)

    • Portable, Compact & Economical
    • Load up to 5" high and up to 11" x 17" sized sheets
    • The Mini-Padder is just one in the line of Challenge products engineered to make your job easier.
    • Maximum Lift Height 5" / 12.7 cm
    • Maximum Lift Width: 17-1/2" / 44 cm
    Part #: CH-MINIPADDER

    $188.00

  9. Challenge MS-10 Multi-Spindle Paper Drill (CH-MS10)

    • High Production Multi-Hole Drilling.
    • Drills Up To 10 Holes in One Stroke.
    • Maximum Drill Bit Diameter 1/2".
    • 2-1/2" Drilling Capacity.
    • Powerful Hydraulic Operation.
    Part #: CH-MS10

    $17995.00

  10. Challenge MS-5 Multi-Spindle Paper Drill (CH-MS5)

    • Side guide adjustment.
    • Backgauge adjustment.
    • Easy drill length adjustment.
    • 2"/ 5.1 cm hollow drill bits available in 13 sizes.
    • 2-1/2"/ 6.4 cm hollow drill bits available in 4 sizes.
    Part #: CH-MS5

    $12120.00

  11. Challenge Paddy Wagon Heavy Duty Padding Press (CH-PADDYWAGON)

    • High Capacity: Holds up to 31" of paper for production padding environments
    • Simple 1-2-3 Operation: Ease of operations turns padding service into a value-added profit center.
    • Tilt & Load: With the double doors locked, tilt the PADDY WAGON back. The 30 Degrees table slant allows gravity to do all the work of aligning stock and keeping it square. Load up to 15,000 8 1/2" x 11" sheets of 20# bond - even more with smaller sheets.
    • Clamp: After loading is complete, aligned stacks are clamped in just seconds. Place the clamping bar on top or your paper, slide the self-locking, quick-release clamps down to the bar and tighten the screws.
    • Tilt & Pad: Tilt the PADDY WAGON back to the upright position, lift the doors to unlock and swing them open for complete access to your padding surface.
    Part #: CH-PADDYWAGON

    $744.00

  12. Challenge Pak Rak Heavy Duty Paper Stock Truck (CH-PAK-RAK)

    • Holds 11" x 17"/28 x 43 cm Stock - Inward slant on each shelf keeps your stock tight to the corner for a square stack - even when moving between locations.
    • 12 shelf surface's to stack separate jobs. Another 4 shelves can be added.
    • 500 lb/227 kg Total Capacity
    • Portable - Four 5" hard rubber industrial casters and two side handles make these units easy to control and easy to roll from place to place.
    • Solid Construction - Shipped to you in one piece, the PAK-RAK is constructed of heavy gauge, welded steel.
    Part #: CH-PAK-RAK

    $994.00

  13. Challenge Pak Rak XL Heavy Duty Paper Stock Truck (CH-PAK-RAK-XL)

    • Holds 14" x 20" Stock - Inward slant on each shelf keeps your stock tight to the corner for a square stack - even when moving between locations.
    • 12 shelf surface's to stack separate jobs. Another 4 shelves can be added.
    • 500 lb/227 kg Total Capacity
    • Portable - Four 5" hard rubber industrial casters and two side handles make these units easy to control and easy to roll from place to place.
    • Solid Construction - Shipped to you in one piece, the PAK-RAK-XL is constructed of heavy gauge, welded steel.
    Part #: CH-PAK-RAK-XL

    $12950.00

  14. Challenge PowerLift I Stack Lifter (CH-POWERLIFT1)

    • Handles a pallet up to 21.75” x 22”.
    • Lifts and Lowers up to 2,500 pounds.
    • Lifts to meet cutter table heights up to 36-1/2”.
    • Hydraulic Lifting Power
    • Welded Steel Frame Construction.
    Part #: CH-POWERLIFT1

    $6964.29

  15. Challenge Refurbished Spartan 150SA Semi Automatic Electric Paper Cutter (MY150SA)

    • Power Cutting: Electric power - 1/2HP Gear Drive Motor
    • Manual Clamping: Hand crank wheel system provides over 200% more clamping force than the lever clamping system. RESULT - a better cut.
    • Safety Guards: Safety covers over the front table (the cutting area) and rear table.
    • Safety Dual Cut Buttons: Requires the simultaneous use of both hands to operate.
    • Construction: Heavy Duty Steel, Cast Iron, and Cast Aluminum Construction gives it "Challenge durability". Hardened steel components and bronze bearings on most wear surfaces increase the life of the machine.
    Part #: MY150SA

    $2995.00

  16. Challenge Spartan 150 HSS Replacement Blade (JH31460HSS)

    • Compatible Models: Challenge Spartan 150
    • Material: High Speed Steel
    • Holes: 6
    • Length: 18.25"
    • With: 1.625"
    Part #: JH31460HSS

    $243.79

  17. Challenge Spartan 150 Replacement Blade (JH31460)

    • Compatible Models: Challenge Spartan 150
    • Material: Standard Inlay
    • Holes: 6
    • Length: 18.25"
    • With: 1.625"
    Part #: JH31460

    $164.29

  18. Challenge Spartan 150A 15.75" Automatic Electric Paper Cutter w/ Power Clamp (CH-SPARTAN150A)

    • Power Cutting: Electric power - 1/2HP Gear Drive Motor
    • Automatic Power Clamping: Automatic power clamping improves productivity and makes cutting simple. All you need to do is lower the safety shield and press the two cutting buttons..
    • Safety Guards: Safety covers over the front table (the cutting area) and rear table.
    • Safety Dual Cut Buttons: Requires the simultaneous use of both hands to operate.
    • Construction: Heavy Duty Steel, Cast Iron, and Cast Aluminum Construction gives it "Challenge durability". Hardened steel components and bronze bearings on most wear surfaces increase the life of the machine.
    Part #: CH-SPARTAN150A

    $5245.00

  19. Challenge Spartan 150M 15.75" Manual Heavy-Duty Paper Cutter (CH-SPARTAN150M)

    • Cutting: Manual - Hand Lever Operation
    • Clamping: Manual - Hand-Crank. The hand-crank design for clamping creates a much higher clamping force than the lever design which results in a better quality cut.
    • LED Digital Backgauge Position Indicator with +/-0.01" (+/-0.1mm) Backgauge Accuracy - provides for easier operator interface, higher productivity, and easier repeatable accuracy than a hard to read indicator on a scale as is used in other brands.
    • Laser Red LED Cut Line Light - produces a very sharp, easy to see cut line without the replacement problems of incandescent bulbs.
    • Front Safety Shield interlocked with the cutting lever - provides protection for the operator during operation.
    Part #: CH-SPARTAN150M

    $2745.00

  20. Challenge Spartan 150SA 15.75" Semi Automatic Electric Paper Cutter (CH-SPARTAN150SA)

    • Power Cutting: Electric power - 1/2HP Gear Drive Motor
    • Manual Clamping: Hand crank wheel system provides over 200% more clamping force than the lever clamping system. RESULT - a better cut.
    • Safety Guards: Safety covers over the front table (the cutting area) and rear table.
    • Safety Dual Cut Buttons: Requires the simultaneous use of both hands to operate.
    • Construction: Heavy Duty Steel, Cast Iron, and Cast Aluminum Construction gives it "Challenge durability". Hardened steel components and bronze bearings on most wear surfaces increase the life of the machine.
    Part #: CH-SPARTAN150SA

    $4745.00

  21. Challenge Spartan 185A 18.5' Automatic Electric Paper Cutter (CH-SPARTAN185A)

    • Electric Power Clamping: Generates over 3000 lbs (1,360 kg) of clamping force
    • Independent Clamping Function: Allows for a "clamp only" operation
    • Manual Backgauge Control: Hand Wheel Control
    • LED Digital Backgauge Position Indicator: With +/-0.01" (+/-0.1mm) backgauge accuracy - provides for easier operator interface, higher productivity, and easier repeatable accuracy than a hard to read indicator on a scale as is used with other brands.
    • Laser Red LED Cut Line Light: produces a bright easy to see cut line.
    Part #: CH-SPARTAN185A

    $10395.00

  22. Challenge Spartan 185AEP 18.5' Electronic Programmable Cutter (CH-SPARTAN185AEP)

    • Electric Power Clamping: Generates over 3000 lbs (1,360 kg) of clamping force
    • Independent Clamping Function: Allows for a "clamp only" operation
    • Electric Powered Backgauge: Controlled by the electronic console with handwheel for micro adjustments
    • 3" Lighted LCD Display: Displays backguague location with +/-0.01" (+/-0.1mm) backgauge accuracy - provides for easier operator interface, higher productivity, and easier repeatable accuracy than a hard to read indicator on a scale as is used with other brands.
    • Programmable: Operator friendly software uses soft key menu prompts for easy programming. During a program the 3" LCD displays up to 5 consecutive cuts to aid the operator in navigating a job.
    Part #: CH-SPARTAN185AEP

    $11495.00

  23. Challenge Spartan 185SA 18.5" Semi Automatic Electric Paper Cutter (CH-SPARTAN185SA)

    • Cutting: Powered by a 1-1/2 HP gear drive motor
    • Manual Clamping: The hand wheel design provides a strong clamping force resulting in high quality cuts.
    • Manual Backgauge Control: Hand Wheel Control
    • LED Digital Backgauge Position Indicator: With +/-0.01" (+/-0.1mm) backgauge accuracy - provides for easier operator interface, higher productivity, and easier repeatable accuracy than a hard to read indicator on a scale as is used with other brands.
    • Laser Red LED Cut Line Light: produces a bright easy to see cut line.
    Part #: CH-SPARTAN185SA

    $8995.00

  24. Challenge Spartan 185SA Replacement Blade - 63017 (JH-31660)

    • Compatible With: Challenge Spartan 185SA Paper Cutter
    • Type of Blade: Standard Inlay
    • Dimensions (L x W x T): 22.500" x 2.630" x .375"
    • Holes/Slots: 6H
    • Hole Size: 5/16"-8
    Part #: JH-31660

    $190.79

  25. Challenge TC Three-Knife Book Trimmer (CMT-330)

    • Capability to trim landscape formatted books up to 12.1" (307 mm) x 12.9" (328 mm).
    • Full high-speed digital control for fast and accurate set-ups in under 6 seconds.
    • Bar code system for fully automated set-up.
    • Simultaneous in-line and near-line book feeding option to maximize utilization.
    • Automatic size detection of untrimmed book blocks.
    Part #: CMT-330

    $73995.00

  26. Challenge Three Knife Trimmer Top Front Replacement Blade (JH-31401)

    • Compatible Models: Challenge Three Knife Trimmer
    • Material: Standard Inlay
    • Holes: 4
    • Length: 13"
    • With: 5"
    Part #: JH-31401

    $196.09

  27. Challenge Three Knife Trimmer Top Left Replacement Blade (JH-31301)

    • Compatible Models: Challenge Three Knife Trimmer
    • Material: Standard Inlay
    • Holes: 4
    • Length: 12"
    • With: 5"
    Part #: JH-31301

    $169.59

  28. Challenge Three Knife Trimmer Top Right Replacement Blade (JH-31201)

    • Compatible Models: Challenge Three Knife Trimmer
    • Material: Standard Inlay
    • Holes: 4
    • Length: 12"
    • With: 5"
    Part #: JH-31201

    $169.59

  29. Challenge Titan 200 20" Electric Programmable Cutter with Light Beams (CH-TITAN200L)

    • Maximum Cutting Width: 20" / 50.8cm
    • Minimum Cut: without false clamp plate: 1/2" / 13mm
    • Minimum Cut: with false clamp plate: 1-7/8" / 48mm
    • Maximum Cut Depth: 20" / 50.8cm
    • Clamp Opening: without false clamp plate: 3-1/4" / 8cm
    Part #: CH-TITAN200L

    $16695.00

  30. Challenge Titan 200 20" Electric Programmable Cutter with Shield (CH-TITAN200)

    • Maximum Cutting Width: 20" / 50.8cm
    • Minimum Cut: without false clamp plate: 1/2" / 13mm
    • Minimum Cut: with false clamp plate: 1-7/8" / 48mm
    • Maximum Cut Depth: 20" / 50.8cm
    • Clamp Opening: without false clamp plate: 3-1/4" / 8cm
    Part #: CH-TITAN200

    $14995.00

Items 1-15 of 22

Display Type List Grid
Page:   1   30   40   50   60   70   80   90   100   110   115   116   117   118   119   120   121   122   123   124   125   126   127   128   129   130   131   132   133   134   135   136   137   138   139   140   141   142   143   144   150   160   170   180   190   200   210   220   300   400   500   600   700   800   900   1,000   1,100   1,102