Product listing: Mactac Permacolor ColorTrans Optically Clear 61" x 150' Perm/Rem Mounting Film (CT2261L150) to Mactac Rebel RB228R 3mil Matte White Removable 54" x 150' Vinyl Print Media (RB228RW54L150)

Page
View by: Title (A-Z)  |  Title (Z-A)  |  Price (High-to-Low)  |  Price (Low-to-High)  |  Popularity  |  Best Sellers  |  Category  |  Product Number
  1. Mactac Permacolor ColorTrans Optically Clear 61" x 150' Perm/Rem Mounting Film (CT2261L150)

    • Physical Properties Property Typical Values Test Method Thickness in inches Carrier plus adhesive Total product 0.0037 (94) 0.0067 (170) ASTM D-645 Quick Tack lb. /in² (N/25mm) Stainless Steel Permanent Removable 2.8 (12.3) 2.5 (11) Mactac CTM-25 Peel Adhesion lb./in. (N/25 mm) Stainless Steel - 30 minutes Stainless Steel – 24 hours 4.0 (17.5) 1.2 (5.2) 5.2 (22.7) 1.6 (7.0) PSTC - 3 Shear, Hours to Fail Stainless Steel 100+ 24+ PSTC - 7 Temperature Ranges Application for best results: End Use: 50° to 120°F (10° - 49°C) -40° to 185°F (-40° to 85°C)
    • Shelf Life Two years when stored at 75°F (24°C) and 50% relative humidity or less. Note: Mactac recommends that rolls be stored on end or suspended from the core.
    • Removability This product has 6 month removability after application from glass, Plexiglas and acrylic sheeting. The removability of CT2500 may be affected by the following substrates: polystyrene, nitrocellulose painted surfaces and soft PVC. With such substrates an increase of adhesion over time may occur and adhesive residue on removal may be noticed.
    • Limitations 1) The user is responsible for determining the product’s suitability, including adhesion and if needed, removal characteristics when used in applications other than listed specifically in this Performance Guide. 2) If there are any questions about applications, please contact your Mactac sales representative to discuss your requirements for recommendations. 3) If this is a printed Performance Guide it is an uncontrolled document. Please check the Mactac website for the latest, most up-to-date version.
    • General Comments
    Part #: CT2261L150

    $573.51

  2. Mactac Permacolor Gemini XT 54" x 150' Clear Rubber Back Mounting Film (PP5654L150)

    • Features and Benefits:
    • High-tack, high peel adhesions and high cohesive strength for quick adhesion
    • Good for low energy surfaces such as Sintra, plastic and styrene
    • Typical Uses:
    • General purpose mounting of digital images
    Part #: PP5654L150

    $195.12

  3. Mactac Permacolor Gemini XT Clear Rubber Back Mounting Films (MACTAC-PP5600)

    • Features and Benefits:
    • High-tack, high peel adhesions and high cohesive strength for quick adhesion
    • Good for low energy surfaces such as Sintra, plastic and styrene
    • Typical Uses:
    • General purpose mounting of digital images
    Part #: MACTAC-PP5600

    $184.40

  4. Mactac Permacolor PermaFlex Lustex 5mil Clear 51" x 150' Rigid Overlaminate (IP6202W51L150)

    • Features and Benefits:
    • Textured lustex finish polycarbonate
    • Eliminates glare
    • Three year outdoor / Five year indoor durability
    • Protects from abrasion and moisture
    Part #: IP6202W51L150

    $581.63

  5. Mactac Permacolor PermaFlex Lustex IP6200 5mil Clear Rigid Overlaminates (MACTAC-IP6200)

    • Features and Benefits:
    • Textured lustex finish polycarbonate
    • Eliminates glare
    • Three year outdoor / Five year indoor durability
    • Protects from abrasion and moisture
    Part #: MACTAC-IP6200

    $581.63

  6. Mactac Permacolor PermaFlex PF6300 5mil 53.9" x 164' Clear PVC Textured Overlaminate (PF6315)

    • Features and Benefits:
    • Thin enough for retractable banners yet durable enough for floor graphics
    • Outdoor durability is three years in vertical applications and indoor durability is five years
    • Floors; use indoor only, durability is 1–3 years depending on traffic.
    • Lamination to either one or both sides of photographic prints, transparencies and digital images to impart protection
    Part #: PF6315

    $453.96

  7. Mactac Permacolor PermaFlex PF6300 5mil 54" x 100' Clear PVC Textured Overlaminate (PF6354L100)

    • Features and Benefits:
    • Thin enough for retractable banners yet durable enough for floor graphics
    • Outdoor durability is three years in vertical applications and indoor durability is five years
    • Floors; use indoor only, durability is 1–3 years depending on traffic.
    • Lamination to either one or both sides of photographic prints, transparencies and digital images to impart protection
    Part #: PF6354L100

    $284.11

  8. Mactac Permacolor PermaFlex PF6300 5mil Clear PVC Textured Overlaminate (MACTAC-PF6300)

    • Features and Benefits:
    • Thin enough for retractable banners yet durable enough for floor graphics
    • Outdoor durability is three years in vertical applications and indoor durability is five years
    • Floors; use indoor only, durability is 1–3 years depending on traffic.
    • Lamination to either one or both sides of photographic prints, transparencies and digital images to impart protection
    Part #: MACTAC-PF6300

    $284.11

  9. Mactac Permacolor PermaFlex PF6400 3.75mil 54" x 150' Clear Poly Textured Floor Overlaminate (PF6454)

    • Features and Benefits:
    • Cost effective enough for short-term promotions
    • Does not finger print
    • Typical Uses:
    • Floor graphics in door only
    Part #: PF6454

    $236.27

  10. Mactac Permacolor PermaGard 1mil 54" x 150' Gloss Clear Dry-Erase Overlaminate (PGD6054L150)

    • Features and Benefits:
    • Gloss finish enhances appearance of the digital image
    • UV inhibitors protect image from color fade
    • Dry erase capabilities
    • Short-term applications
    Part #: PGD6054L150

    $329.66

  11. Mactac Permacolor PermaPrint IP5000 Series White Perm/Perm Back Mounting Films (MACTAC-IP5000)

    • Features and Benefits:
    • One paper release liner allows for fast lamination
    • Typical Uses:
    • Mounting of images to black gator, Sintra and other typical mounting substrates
    • Physical Properties Property Typical Values Test Method Thickness mils (mm) Adhesive Carrier and Adhesive 1/1 (0.028/0.028) 4.5 (0.114) ASTM D-645 Peel Adhesion, lb. /in. (N/25 mm) Stainless Steel - 30 min. - 24 hr. 3.5 (19) 4.0 (22) PSTC - 3 Quick Tack lb. /in² (N/25mm) Stainless Steel 4.4 (17.5) MACtac CTM-25 Shear, Hours to Fail Stainless Steel 150 PSTC - 7 Temperature Ranges Application for best results: End Use: 50° to 120°F (10° - 49°C) -20° to 200°F (-30° to 93°C) Adhesive pH Neutral TAPPI-529
    Part #: MACTAC-IP5000

    $204.43

  12. Mactac Permacolor PermaPrint White 37" x 150' Perm/Perm Back Mounting Film (IP5007)

    • Features and Benefits:
    • One paper release liner allows for fast lamination
    • Typical Uses:
    • Mounting of images to black gator, Sintra and other typical mounting substrates
    • Physical Properties Property Typical Values Test Method Thickness mils (mm) Adhesive Carrier and Adhesive 1/1 (0.028/0.028) 4.5 (0.114) ASTM D-645 Peel Adhesion, lb. /in. (N/25 mm) Stainless Steel - 30 min. - 24 hr. 3.5 (19) 4.0 (22) PSTC - 3 Quick Tack lb. /in² (N/25mm) Stainless Steel 4.4 (17.5) MACtac CTM-25 Shear, Hours to Fail Stainless Steel 150 PSTC - 7 Temperature Ranges Application for best results: End Use: 50° to 120°F (10° - 49°C) -20° to 200°F (-30° to 93°C) Adhesive pH Neutral TAPPI-529
    Part #: IP5007

    $301.13

  13. Mactac Permacolor PermaPrint White 38" x 150' Perm/Perm Back Mounting Film (IP5008)

    • Features and Benefits:
    • One paper release liner allows for fast lamination
    • Typical Uses:
    • Mounting of images to black gator, Sintra and other typical mounting substrates
    • Physical Properties Property Typical Values Test Method Thickness mils (mm) Adhesive Carrier and Adhesive 1/1 (0.028/0.028) 4.5 (0.114) ASTM D-645 Peel Adhesion, lb. /in. (N/25 mm) Stainless Steel - 30 min. - 24 hr. 3.5 (19) 4.0 (22) PSTC - 3 Quick Tack lb. /in² (N/25mm) Stainless Steel 4.4 (17.5) MACtac CTM-25 Shear, Hours to Fail Stainless Steel 150 PSTC - 7 Temperature Ranges Application for best results: End Use: 50° to 120°F (10° - 49°C) -20° to 200°F (-30° to 93°C) Adhesive pH Neutral TAPPI-529
    Part #: IP5008

    $294.53

  14. Mactac Permacolor PermaPrint White 51" x 150' Perm/Perm Back Mounting Film (IP5002)

    • Features and Benefits:
    • One paper release liner allows for fast lamination
    • Typical Uses:
    • Mounting of images to black gator, Sintra and other typical mounting substrates
    • Physical Properties Property Typical Values Test Method Thickness mils (mm) Adhesive Carrier and Adhesive 1/1 (0.028/0.028) 4.5 (0.114) ASTM D-645 Peel Adhesion, lb. /in. (N/25 mm) Stainless Steel - 30 min. - 24 hr. 3.5 (19) 4.0 (22) PSTC - 3 Quick Tack lb. /in² (N/25mm) Stainless Steel 4.4 (17.5) MACtac CTM-25 Shear, Hours to Fail Stainless Steel 150 PSTC - 7 Temperature Ranges Application for best results: End Use: 50° to 120°F (10° - 49°C) -20° to 200°F (-30° to 93°C) Adhesive pH Neutral TAPPI-529
    Part #: IP5002

    $400.04

  15. Mactac Permacolor PromoGard 3.5mil 51" x 150' Gloss Clear Digital PS Overlaminate (PG7051)

    • Features and Benefits:
    • Suitable for use over solvent, eco-solvent, UV and latex printed wide-format graphics
    • Up to four years outdoor durability
    • Typical Uses:
    • Protection of short-term indoor and outdoor graphics
    Part #: PG7051

    $183.27

  16. Mactac Permacolor PromoGard 3.5mil 54" x 150' Gloss Clear Digital PS Overlaminate (PG7054)

    • Features and Benefits:
    • Suitable for use over solvent, eco-solvent, UV and latex printed wide-format graphics
    • Up to four years outdoor durability
    • Typical Uses:
    • Protection of short-term indoor and outdoor graphics
    Part #: PG7054

    $194.04

  17. Mactac Permacolor PromoGard 3.5mil 54" x 150' Lustre Clear Digital PS Overlaminate (PG7354)

    • Features and Benefits:
    • Suitable for use over solvent, eco-solvent, UV and latex printed wide-format graphics
    • Up to four years outdoor durability
    • Typical Uses:
    • Protection of short-term indoor and outdoor graphics
    Part #: PG7354

    $194.04

  18. Mactac Permacolor PromoGard 3.5mil 54" x 150' Matte Clear Digital PS Overlaminate (PG7254)

    • Features and Benefits:
    • Suitable for use over solvent, eco-solvent, UV and latex printed wide-format graphics
    • Up to four years outdoor durability
    • Typical Uses:
    • Protection of short-term indoor and outdoor graphics
    Part #: PG7254

    $194.04

  19. Mactac Permacolor PromoGard PG7000 Series 3.5mil Gloss Clear Digital PS Overlaminates (MACTAC-PG70)

    • Features and Benefits:
    • Suitable for use over solvent, eco-solvent, UV and latex printed wide-format graphics
    • Up to four years outdoor durability
    • Typical Uses:
    • Protection of short-term indoor and outdoor graphics
    Part #: MACTAC-PG70

    $183.27

  20. Mactac Permacolor PromoGard PG7200 Series 3.5mil Matte Clear Digital PS Overlaminates (MACTAC-PG72)

    • Features and Benefits:
    • Suitable for use over solvent, eco-solvent, UV and latex printed wide-format graphics
    • Up to four years outdoor durability
    • Typical Uses:
    • Protection of short-term indoor and outdoor graphics
    Part #: MACTAC-PG72

    $183.27

  21. Mactac Permacolor PromoGard PG7300 Series 3.5mil Lustre Clear Digital PS Overlaminates (MACTAC-PG73)

    • Features and Benefits:
    • Suitable for use over solvent, eco-solvent, UV and latex printed wide-format graphics
    • Up to four years outdoor durability
    • Typical Uses:
    • Protection of short-term indoor and outdoor graphics
    Part #: MACTAC-PG73

    $194.04

  22. Mactac Permacolor RAYZor 1.5mil 54" x 150' Clear Matte Cast Vinyl Overlaminate (LF3638G)

    • Physical Properties Property Typical Values Test Method Thickness, inches (µm) Film plus adhesive Total product 0.0025 (64) 0.0039 (100) ASTM D-645 Peel Adhesion lb./in. (N/25mm) 180° on stainless steel -20 min - 24 hrs. 3.0 (13.1) 3.7 (16.5) PSTC-1 Quick Tack, lb./in² (N/25mm) Stainless Steel 2.5 (11) FTM - 9 Dimensional Stability, (%) 48 hours @ 158°F max 0.01 FTM - 14 10” x 10” Sample Bonded to aluminum Gloss (60°) 2 – 10 Temperature Ranges Minimum Application: End Use: 50°F (+10°C) -50°F to 225°F (-45°C to 107°C) Surface Burning Characteristics (Meets ANSI, NFPA, and IFC as class A) Flame Spread Smoke Density 0 30 ASTM E84-01 or ANSI/NFPA 255 or IFC 8-1 Adhesive pH Neutral TAPPI-529
    • Chemical Resistance Salt Water Spray .................... ASTM B 117-03
    • 100 hours @ 5% solution ........... no change Water Immersion
    • 100 hours immersed @ RT ........... no change Other immersion tests show:
    • Gasoline (30 min.) ........... No effect
    Part #: LF3638G

    $642.09

  23. Mactac Permacolor RAYZor 1.5mil 54" x 75' Clear Gloss Cast Vinyl Overlaminate (LF3648GL75)

    • Features and Benefits:
    • Built-in UV protection
    • Optically clear gloss and gloss finishes
    • Part of the B•free® application warranty
    • Five to seven years outdoor durability
    Part #: LF3648GL75

    $298.20

  24. Mactac Permacolor RAYZor 1.5mil 54" x 75' Clear Matte Cast Vinyl Overlaminate (LF3638GL75)

    • Physical Properties Property Typical Values Test Method Thickness, inches (µm) Film plus adhesive Total product 0.0025 (64) 0.0039 (100) ASTM D-645 Peel Adhesion lb./in. (N/25mm) 180° on stainless steel -20 min - 24 hrs. 3.0 (13.1) 3.7 (16.5) PSTC-1 Quick Tack, lb./in² (N/25mm) Stainless Steel 2.5 (11) FTM - 9 Dimensional Stability, (%) 48 hours @ 158°F max 0.01 FTM - 14 10” x 10” Sample Bonded to aluminum Gloss (60°) 2 – 10 Temperature Ranges Minimum Application: End Use: 50°F (+10°C) -50°F to 225°F (-45°C to 107°C) Surface Burning Characteristics (Meets ANSI, NFPA, and IFC as class A) Flame Spread Smoke Density 0 30 ASTM E84-01 or ANSI/NFPA 255 or IFC 8-1 Adhesive pH Neutral TAPPI-529
    • Chemical Resistance Salt Water Spray .................... ASTM B 117-03
    • 100 hours @ 5% solution ........... no change Water Immersion
    • 100 hours immersed @ RT ........... no change Other immersion tests show:
    • Gasoline (30 min.) ........... No effect
    Part #: LF3638GL75

    $321.77

  25. Mactac Permacolor RAYZor 1.5mil Clear Gloss Cast Vinyl Overlaminate (MACTAC-LF364G)

    • Features and Benefits:
    • Built-in UV protection
    • Optically clear gloss and gloss finishes
    • Part of the B•free® application warranty
    • Five to seven years outdoor durability
    Part #: MACTAC-LF364G

    $298.20

  26. Mactac Permacolor RAYZor 1.5mil Clear Matte Cast Vinyl Overlaminates (MACTAC-LF363G)

    • Features and Benefits:
    • Built-in UV protection
    • Part of the B•free application warranty
    • Typical Uses:
    • Highly conformable for vehicle graphics, fleet, marine and rough wall graphics
    Part #: MACTAC-LF363G

    $321.77

  27. Mactac Permacolor Thermacolor 5mil 38" x 250' Gloss Clear Thermal Overlaminate (TL2055)

    • Features and Benefits:
    • Enhances image to provide more vibrant colors
    • UV inhibitors protect image from color fade
    • Protects from moisture
    • Thicker products provide maximum protection
    Part #: TL2055

    $226.13

  28. Mactac Permacolor Thermacolor 5mil 51" x 250' Gloss Clear Thermal Overlaminate (TL2051)

    • Features and Benefits:
    • Enhances image to provide more vibrant colors
    • UV inhibitors protect image from color fade
    • Protects from moisture
    • Thicker products provide maximum protection
    Part #: TL2051

    $284.41

  29. Mactac Permacolor Thermacolor Gloss Clear Thermal Overlaminates (MACTAC-TL2)

    • Features and Benefits:
    • Enhances image to provide more vibrant colors
    • UV inhibitors protect image from color fade
    • Protects from moisture
    • Thicker products provide maximum protection
    Part #: MACTAC-TL2

    $197.76

  30. Mactac Rebel RB228R 3mil Matte White Removable 54" x 150' Vinyl Print Media (RB228RW54L150)

    • Features and Benefits:
    • Wide-format and screen printable.
    • Two year durability.
    • Six months to one year removability.
    • Matte face.
    Part #: RB228RW54L150

    $155.93

Items 1-15 of 22

Display Type List Grid
Page:   1   30   40   50   60   70   80   90   100   110   121   122   123   124   125   126   127   128   129   130   131   132   133   134   135   136   137   138   139   140   141   142   143   144   145   146   147   148   149   150   160   170   180   190   200   210   220   230   300   314