Product listing: Keencut 124" Evolution 2 Bench (60953) to Keencut 36" HSGM Hot Cut System (61735)

Page
View by: Title (A-Z)  |  Title (Z-A)  |  Price (High-to-Low)  |  Price (Low-to-High)  |  Popularity  |  Best Sellers  |  Category  |  Product Number
  1. Keencut 124" Evolution 2 Bench (60953)

    • Aluminum base plate for easy alignment of the Evolution-E2 mounting brackets.
    • Unique leg to beam fixing brackets apply incredible strength to Evolution 2 Benches.
    • Adjustable feet allow the bench to be installed on uneven floors without compromising accuracy.
    • Once the Evolution-E2 is installed, only one 3/4" thick worktop is needed to bring the cutter base level to the worktop (worktop not included, 3/4" MDF or finished plywood recommended).
    • When not in use, the cutter bar’s swing-over capability allows it to be folded under the Evolution 2 Bench, resulting in an unobstructed workbench surface.
    Part #: 60953

    $1066.50

  2. Keencut 124" Simplex Sheet Material Cutter (60459)

    • Rear loading blade holder for swift replacement; blades will never pull out in heavy materials.
    • Fully equipped and ready to work with 100 medium duty blades included. Accepts standard utility blades.
    • The lightweight extrusion design makes the Simplex an ideal general purpose cutter.
    • Quick fit thread cap for easy accessory attachment.
    • Blade locking thumb screw adds safety and convenience.
    Part #: 60459

    $688.50

  3. Keencut 135cm Laser Trued Safety Straight Edge (60015)

    • Lightweight anodized aluminum frame.
    • Embedded steel edge for lasting accuracy.
    • Full-length metric & imperial scale.
    • Two full-length silicone grip cords protect and clamp your materials.
    • Laser-trued
    Part #: 60015

    $117.00

  4. Keencut 144" Evolution 2 Bench (60954)

    • Aluminum base plate for easy alignment of the Evolution-E2 mounting brackets.
    • Unique leg to beam fixing brackets apply incredible strength to Evolution 2 Benches.
    • Adjustable feet allow the bench to be installed on uneven floors without compromising accuracy.
    • Once the Evolution-E2 is installed, only one 3/4" thick worktop is needed to bring the cutter base level to the worktop (worktop not included, 3/4" MDF or finished plywood recommended).
    • When not in use, the cutter bar’s swing-over capability allows it to be folded under the Evolution 2 Bench, resulting in an unobstructed workbench surface.
    Part #: 60954

    $1296.00

  5. Keencut 150cm Laser Trued Safety Straight Edge (60016)

    • Lightweight anodized aluminum frame.
    • Embedded steel edge for lasting accuracy.
    • Full-length metric & imperial scale.
    • Two full-length silicone grip cords protect and clamp your materials.
    • Laser-trued
    Part #: 60016

    $126.00

  6. Keencut 18" Futura Safety Flexo Plate Cutter Series 2 (61906)

    • Designed specifically for cutting flexo printing plates.
    • Eliminates the onerous task of hand beveling, minimizes the risk of injury from remakes and bad cuts.
    • Perfectly designed for cutting and trimming floor graphics or other materials requiring seamless splices.
    • High performance self-aligning steel roller bearings operate on twin steel tracks.
    • Designed for a lifetime of straight, accurate, silent cutting. Can handle dense, hard-to-cut materials with no flex, side play or hooks.
    Part #: 61906

    $1255.50

  7. Keencut 18" Laser Trued Safety Straight Edge (60008)

    • Lightweight anodized aluminum frame.
    • Embedded steel edge for lasting accuracy.
    • Full-length metric & imperial scale.
    • Two full-length silicone grip cords protect and clamp your materials.
    • Laser-trued
    Part #: 60008

    $58.50

  8. Keencut 180cm Laser Trued Safety Straight Edge (60017)

    • Lightweight anodized aluminum frame.
    • Embedded steel edge for lasting accuracy.
    • Full-length metric & imperial scale.
    • Two full-length silicone grip cords protect and clamp your materials.
    • Laser-trued
    Part #: 60017

    $139.50

  9. Keencut 2' x 2' M-Bench Addition (22"L x 23.75"W x 35.5"H) (60996)

    • Add new modules to your existing bench quickly and simply
    • Easy assembly
    • Concealed internal fixings
    • High grade anodized surface for a clean look
    • Ideal workbench for general use and all Foster Keencut cutters and trimmers
    Part #: 60996

    $315.00

  10. Keencut 2'x 2' M-Bench Base (23.75"L x 23.75"W x 35.5"H) (60992)

    • Add new modules to your existing bench quickly and simply
    • Easy assembly
    • Concealed internal fixings
    • High grade anodized surface for a clean look
    • Ideal workbench for general use and all Foster Keencut cutters and trimmers
    Part #: 60992

    $360.00

  11. Keencut 24" Laser Trued Safety Straight Edge (60000)

    • Lightweight anodized aluminum frame.
    • Embedded steel edge for lasting accuracy.
    • Full-length metric & imperial scale.
    • Two full-length silicone grip cords protect and clamp your materials.
    • Laser-trued
    Part #: 60000

    $63.00

  12. Keencut 28mm Textile Blade Holder (1pk) (69140)

    • Work with: Simplex, Max ,Evolution, Sabre GPC, Javelin, Javelin Xtra and Practik
    • Quantity: 1 Per Pack
    • Part Number: 69140
    • Work with Simplex, Max ,Evolution, Sabre GPC, Javelin, Javelin Xtra and Practik
    • Comes in 1 Per Pack
    Part #: 69140

    $67.50

  13. Keencut 28mm Textile Cutting Wheels (10pk) (69141)

    • Work with: Simplex, Max ,Evolution, Sabre GPC, Javelin, Javelin Xtra and Practik
    • Quantity: 10 Per Pack
    • Part Number: 69141
    • Work with Simplex, Max ,Evolution, Sabre GPC, Javelin, Javelin Xtra and Practik
    • Comes in 10 Per Pack
    Part #: 69141

    $135.00

  14. Keencut 2X Base Extension Support Arm 24" Long (61216)

    • Work with: Ultimat Gold and Futura
    • Lenth: 24"
    • Warranty: 5 Years
    • Part Number: 61216
    • Work with Ultimat Gold and Futura Cutters
    Part #: 61216

    $139.50

  15. Keencut 30" Extended Margin Guide Kit (61218)

    • Work with: Flexo Futura, Ultimat Futura and Gold
    • Lenth: 30"
    • Warranty: 5 Years
    • Part Number: 61218
    • Work with Flexo Futura, Ultimat Futura and Gold Cutters
    Part #: 61218

    $238.50

  16. Keencut 30" Laser Trued Safety Straight Edge (60001)

    • Lightweight anodized aluminum frame.
    • Embedded steel edge for lasting accuracy.
    • Full-length metric & imperial scale.
    • Two full-length silicone grip cords protect and clamp your materials.
    • Laser-trued
    Part #: 60001

    $76.50

  17. Keencut 32" Futura Safety Flexo Plate Cutter Series 2 (61908)

    • Designed specifically for cutting flexo printing plates.
    • Eliminates the onerous task of hand beveling, minimizes the risk of injury from remakes and bad cuts.
    • Perfectly designed for cutting and trimming floor graphics or other materials requiring seamless splices.
    • High performance self-aligning steel roller bearings operate on twin steel tracks.
    • Designed for a lifetime of straight, accurate, silent cutting. Can handle dense, hard-to-cut materials with no flex, side play or hooks.
    Part #: 61908

    $1435.50

  18. Keencut 36" AZTC Hot Cut System (61725)

    • Hot Cut Size: 36"
    • Includes: Cutter bar, Heat Knife Carrier and Silicone tape
    • Optional: Stand Packages
    • Warranty:
    • 5-year parts warranty (excluding blades, clamp strips, site line strips and cutting wheels).
    Part #: 61725

    $922.50

  19. Keencut 36" Extended Measuring Arm for ARC Cutters (69208)

    • Work with: Advanced Rotary Cutter
    • Length: 36"
    • Warranty: 5 Years
    • Part Number: 69208
    • Work with Advanced Rotary Cutter
    Part #: 69208

    $166.50

  20. Keencut 36" Extended Measuring Arm for Sabre Series 2 (69210)

    • Work with: Sabre Series 2 All Purpose Cutter
    • Length: 36"
    • Warranty: 5 Years
    • Part Number: 69210
    • Work with Sabre Series 2 All Purpose Cutter
    Part #: 69210

    $166.50

  21. Keencut 36" High Stand For 100" Sabre Series 2 GPC and ARC (62367)

    • For use with: 100" Sabre Series 2 GPC and Advanced Rotary Cutter
    • Height: 36"
    • Stand Color: Black finished
    • Part Number: 62367
    • For use with: 100" Sabre Series 2 GPC and Advanced Rotary Cutter
    Part #: 62367

    $751.50

  22. Keencut 36" High Stand For 120" Sabre Series 2 GPC and ARC (62368)

    • For use with: 120" Sabre Series 2 GPC and Advanced Rotary Cutter
    • Height: 36"
    • Stand Color: Black finished
    • Part Number: 62368
    • For use with: 120" Sabre Series 2 GPC and Advanced Rotary Cutter
    Part #: 62368

    $792.00

  23. Keencut 36" High Stand For 40" Sabre Series 2 GPC (62361)

    • For use with: Sabre Series 2 GPC 40"
    • Height: 36"
    • Stand Color: Black finished
    • Part Number: 62361
    • For use with: Sabre Series 2 GPC 40"
    Part #: 62361

    $522.00

  24. Keencut 36" High Stand For 42" ARC (62362)

    • For use with: 42" Advanced Rotary Cutter
    • Height: 36"
    • Stand Color: Black finished
    • Part Number: 62362
    • For use with: For 42" Advanced Rotary Cutter
    Part #: 62362

    $544.50

  25. Keencut 36" High Stand For 60" ARC (62365)

    • For use with: 60" Advanced Rotary Cutterli>
    • Height: 36"
    • Stand Color: Black finished
    • Part Number: 62365
    • For use with: For 60" Advanced Rotary Cutter
    Part #: 62365

    $652.50

  26. Keencut 36" High Stand For 60" Sabre Series 2 GPC (62364)

    • For use with: Sabre Series 2 GPC 60"
    • Height: 36"
    • Stand Color: Black finished
    • Part Number: 62364
    • For use with: Sabre Series 2 GPC 60"
    Part #: 62364

    $562.50

  27. Keencut 36" High Stand For 80" Sabre Series 2 GPC and ARC (62366)

    • For use with: 80" Sabre Series 2 GPC and Advanced Rotary Cutter
    • Height: 36"
    • Stand Color: Black finished
    • Part Number: 62366
    • For use with: 80" Sabre Series 2 GPC and Advanced Rotary Cutter
    Part #: 62366

    $657.00

  28. Keencut 36" Hot Cut System with HSGM Heat Knife - 61745 - Open Box (MYR-18-263-9)

    • Type R Blade. This general-use blade (1.14 inches of heated surface) cuts straight lines easily on glass surfaces and is designed for synthetic fabrics, webbing and ropes of up to 17mm diameter.
    • HSO-N Blade. This precision-based pointed blade with 9 mm of heated cutting area is designed for fine fabrics and is useful in projects requiring curved cuts.
    • 1-year limited warranty for manufacturer defects on HSGM heat knives.
    • Cut Size: 36"
    • Warrany: 1 Year limited
    Part #: MYR-18-263-9

    $1073.25

  29. Keencut 36" Hot Cut System with HSGM Heat Knife (61745)

    • Type R Blade. This general-use blade (1.14 inches of heated surface) cuts straight lines easily on glass surfaces and is designed for synthetic fabrics, webbing and ropes of up to 17mm diameter.
    • HSO-N Blade. This precision-based pointed blade with 9 mm of heated cutting area is designed for fine fabrics and is useful in projects requiring curved cuts.
    • 1-year limited warranty for manufacturer defects on HSGM heat knives.
    • Cut Size: 36"
    • Warrany: 1 Year limited
    Part #: 61745

    $1377.00

  30. Keencut 36" HSGM Hot Cut System (61735)

    • Hot Cut Size: 36"
    • Includes: Cutter bar, Heat Knife Carrier and Silicone tape
    • Optional: Stand Packages
    • Warranty:
    • 5-year parts warranty (excluding blades, clamp strips, site line strips and cutting wheels).
    Part #: 61735

    $922.50

Items 1-15 of 22

Display Type List Grid
Page:   1   100   110   120   130   140   150   160   170   180   187   188   189   190   191   192   193   194   195   196   197   198   199   200   201   202   203   204   205   206   207   208   209   210   211   212   213   214   215   216   220   230   240   250   260   270   280   290   300   400   500   524