Product listing: Graphic Whizard Automatic Pile Feeder (PT-330PF) to Graphic Whizard Wizard PT335-B Multi Automatic Creaser (PT335B)

Page
View by: Title (A-Z)  |  Title (Z-A)  |  Price (High-to-Low)  |  Price (Low-to-High)  |  Popularity  |  Best Sellers  |  Category  |  Product Number
  1. Graphic Whizard Automatic Pile Feeder (PT-330PF)

    • Run in-line with offline finishing equipment to streamline the feeding process for handfed machines.
    • 4" vacuum pile feeder and conveyor outfeed.
    • Handle a wide variety of stock weight and sizes.
    • Can be adjusted to conform to a variety of feeding jobs.
    • Speed: 4,500 sph
    Part #: PT-330PF

    $6765.79

  2. Graphic Whizard Automatic Pile Feeder (PT-520PF)

    • Increase productivity by automating the feeding process.
    • Easily aligns with precise registration to feed a wide range of machines.
    • Variable speed, 500-10,000 sheets per hour.
    • Options: Conveyor outfeed with register, conveyor outfeed with drive belts, output tray, ultrasonic doubles detection, long sheet extension.
    • Increase productivity by automating the feeding process.
    Part #: PT-520PF

    $12781.07

  3. Graphic Whizard Corner Rounder (PT-CR607)

    • Protective safety covers, two handed operation or heavy duty foot pedal control.
    • Comes standard with 7 dies plus 7 replacement blades that are all preloaded into a rotary carousel (3mm, 4mm, 5mm, 6mm, 7mm, 8mm and 10mm radii).
    • Large work table.
    • Built-in scrap box.
    • Maximum Capacity: 2.36" (600 Sheets, 20lb bond)
    Part #: PT-CR607

    $4881.07

  4. Graphic Whizard Crease/Perf/Fold Machine (PT-335CKF)

    • Auto Sheet length measurement.
    • Automated, or Manual job set-up for custom jobs.
    • No limitations between creases/perfs.
    • Partial perforation capabilities in both directions.
    • 4" deep pile feeder.
    Part #: PT-335CKF

    $33174.36

  5. Graphic Whizard CreaseMaster PT-MCP Manual Scoring Machine (GW-MCP)

    • Channel crease die system to eliminate cracking.
    • Easy to use handle operation.
    • Simple switch from creasing to perfing.
    • Adjustable backstops for accuracy.
    • Built in ruler for accurate size adjustments.
    Part #: GW-MCP

    $860.54

  6. Graphic Whizard FinishMaster 100 Perforate Score and Slit Machine (GW-FM100)

    • Variable speed, up to 10,000 standard-size sheets per hour
    • Tabletop model; optional stand available
    • Perforating options: 2,4,6,8,12,16 TPI
    • MICROPERF options: 42 or 72 TPI
    • Scoring options: wide (standard), narrow or double
    Part #: GW-FM100

    $5225.00

  7. Graphic Whizard Finishmaster 150 Perforate Score and Slit Machine (FM150)

    • Variable speed, up to 20,000 standard-size sheets per hour.
    • 30 inch-long register board for easy set-up AND perfect register!
    • Floor model on castors; doesn’t need dedicated table or floor space.
    • Perforating options: 2,4,6,8,12,16 TPI.
    • Optional slitting blade available.
    Part #: FM150

    $8210.00

  8. Graphic Whizard Independent Knife Folder (PT-33IKF)

    • Fold speeds of over 7000 sheets per hour.
    • Fold paper from 150 to 350 GSM.
    • Place in line with PT 335A Plus for full automation with no creasing limitations.
    • Self adjusting automated smart delivery.
    • Three years parts electronics warranty.
    Part #: PT-33IKF

    $18615.79

  9. Graphic Whizard Motorized Transport System (GW-TRANSPORT-SYSTEM)

    • Stand alone, motorized conveyor system.
    • Connect any machine to another eliminating the need for additional handling.
    • Pneumatic cylinder allows for height adjustment from a low 32"(81.25cm) to a maximum of 38"(96.5cm) With up to 30° of incline and decline available.
    • Allows machines of different heights to be easily connected.
    • Variable speed control up to 20,000 sheets per hour.
    Part #: GW-TRANSPORT-SYSTEM

    $3170.00

  10. Graphic Whizard Numbering, Perforating, Scoring and Slitting Machine (GW-3000)

    • 3,000 sheets per hour.
    • 1 number per head per sheet.
    • 1 or 2 numbering heads.
    • Tabletop model with automatic feed.
    • Crash numbering up to 10 part carbonless.
    Part #: GW-3000

    $8050.00

  11. Graphic Whizard PT 330 Mini Handfed Tabletop Creaser (PT 330-Mini)

    • True die crease to eliminate toner cracking.
    • Tabletop machine for ease of storage.
    • Removable trays to save space.
    • Keypad programming for efficient set-up.
    • 1 year parts /electronics warranty.
    Part #: PT 330-Mini

    $2251.50

  12. Graphic Whizard PT 4x4 Storage Cart (GW-PT4X4)

    • 16 Heavy Duty shelves standard.
    • Optional shelf extension allows for paper sizes up to 14" x 25" to be stored.
    • Heavy Duty Casters.
    • Side handles for ease of movement.
    • Capacity: Up to 13" x 19" (and Beyond)
    Part #: GW-PT4X4

    $1777.50

  13. Graphic Whizard PT Air Digital Jogger (PT-Jogger)

    • Electrical: 110 V, 50/60Hz, 10A
    • Maximum Stock Size: 13.75” x 19.5” x 2” (34.92cm x 49.53cm x 5.08cm)
    • Feeder: Manual
    • Tabletop/Floor: Tabletop (Optional stand available)
    • Warranty: 3 Years Mechanical Parts and Electronics
    Part #: PT-Jogger

    $2149.93

  14. Graphic Whizard PT-331SCC Air Slitter/Cutter/Creaser/Perforator (PT-331SCC-AIR)

    • Slit, cut, crease or perf in a single pass.
    • 150-350 gsm (100 lb text - 16 pt).
    • Interchangeable crease or perf dies.
    • Full or partial cross perf.
    • Up to 32 crease/perfs in one pass.
    Part #: PT-331SCC-AIR

    $21437.21

  15. Graphic Whizard PT320 CC Business Card Cutter (PT320-CC)

    • Productive and profitable machine to produce 24up business cards.
    • Produce 250 business cards in less than 2 monutes.
    • Uses lead edge cut mark registration to compensate for image shift.
    • Able to process coated, non-coated and laminated stock.
    • Easy to use LCD panel with 6 job program memory.
    Part #: PT320-CC

    $5981.43

  16. Graphic Whizard PT330S Semi-Automatic Creaser (GW-PT330S)

    • Electrical: 110-130V, 50/60Hz, 10A
    • Speed: 2800 sph (based on 8.5” x 11” run landscape, 1 crease)
    • Maximum Stock Size: 13” x 25.6” (33.02cm x 65.02cm)
    • Minimum Stock Size: 1.97” x 3.94” (5cm x 10.01cm)
    • Stock Weight: 26# bond – 16 pt
    Part #: GW-PT330S

    $4226.25

  17. Graphic Whizard PT335 A+ Automatic Creaser (PT335-A-Plus)

    • Processes up to a maximum sheet size of 12.95" x 25.5" / 36.8 cm x 64.75 cm (39"/99.1 cm handfed).
    • Perform up to 16 creases per sheet!
    • Easy to replace front loading interchangeable crease/perf dies.
    • Up to 50 jobs can be stored into long-term memory.
    • Rotary perforation optional.
    Part #: PT335-A-Plus

    $16161.14

  18. Graphic Whizard PT375 CKF Automatic Creaser/Folder (PT375CKF)

    • Auto sheet measure.
    • Auto setup.
    • Air fed suction feeder.
    • Interchangeable crease/cross-perf dies.
    • Linear rotary and cross perf Impact in a single pass.
    Part #: PT375CKF

    $25695.00

  19. Graphic Whizard Slitter/Cutter/Creaser/Perforator (PT-331SCC)

    • Slit, cut, crease or perf in a single pass.
    • 150-350 gsm.
    • Interchangeable crease/ perf dies.
    • Full or partial cross perf.
    • Up to 32 creases/ perfs in one pass.
    Part #: PT-331SCC

    $9875.00

  20. Graphic Whizard Wizard CreaseMaster Platinum Pneumatic Creaser (CreaseMasterPLTNM)

    • Impact creasing significantly reduces cracking of digitally-printed substrates during the finishing process.
    • Inverted and regular impact creasing in the same pass!
    • Up to 10 impact creases per sheet.
    • Up to 20 jobs can be stored into memory.
    • Easy-to-use programming. Set up in minutes!
    Part #: CreaseMasterPLTNM

    $24775.00

  21. Graphic Whizard Wizard CreaseMaster PLUS+ Pneumatic Creaser (CreaseMasterPLUS+)

    • Impact creasing significantly reduces cracking of digitally-printed substrates during the finishing process.
    • Inverted and regular impact creasing in the same pass!
    • Up to 10 impact creases per sheet.
    • Up to 20 jobs can be stored into memory.
    • Easy-to-use programming. Set up in minutes!
    Part #: CreaseMasterPLUS+

    $15965.00

  22. Graphic Whizard Wizard CreaseMaster Pro Friction Feed Creaser (CreaseMasterProFF)

    • Impact creasing significantly reduces cracking of digitally-printed substrates during the finishing process.
    • Floor model impact creasing machine for low to mid volume users.
    • Pneumatic model (requires compressed air).
    • Inverted and regular impact creasing in the same pass!
    • Menu driven touch screen controls allow for unequalled ease of use.
    Part #: CreaseMasterProFF

    $11190.00

  23. Graphic Whizard Wizard CreaseMaster Pro Hand Feed Creaser (CreaseMasterProHF)

    • Impact creasing significantly reduces cracking of digitally-printed substrates during the finishing process.
    • Floor model impact creasing machine for low to mid volume users.
    • Pneumatic model (requires compressed air).
    • Inverted and regular impact creasing in the same pass!
    • Menu driven touch screen controls allow for unequalled ease of use.
    Part #: CreaseMasterProHF

    $10410.00

  24. Graphic Whizard Wizard GW 12000 Number/Perf/Score/Slit Machine (GW12000)

    • 12,000 standard-size sheets per hour.
    • 100-job memory to store numbering jobs.
    • Up to 100 numbering positions per head per sheet.
    • Automatic feed; Optional "vertical" air feed available
    • 1-4 PNEUMATIC numbering heads; compressor required but not supplied.
    Part #: GW12000

    $16075.00

  25. Graphic Whizard Wizard GW 6000 Number/Perf/Score/Slit Machine (GW6000)

    • 3,000 sheets per hour.
    • 1 number per head per sheet.
    • 1 or 2 Numbering Heads.
    • Tabletop model with automatic feed.
    • Crash numbering up to 10 part carbonless.
    Part #: GW6000

    $9425.00

  26. Graphic Whizard Wizard GW 8000E Number/Perf/Score/Slit Machine (GW8000E)

    • 8,000 standard-size sheets per hour.
    • 100 job memory to store numbering jobs.
    • Up to 100 numbers per head per sheet.
    • Up to 2 heads.
    • Crash number up to 10 part carbonless.
    Part #: GW8000E

    $11275.00

  27. Graphic Whizard Wizard GW 8000P Number/Perf/Score/Slit Machine (GW8000P)

    • 8,000 standard-size sheets per hour.
    • Upgradable to GW12000 at any time!
    • Automatic feed.
    • Simple setup.
    • Easy to operate.
    Part #: GW8000P

    $12105.00

  28. Graphic Whizard Wizard GW 8000P-DS Number/Perf/Score Systems (GW8000P-DS)

    • Up to 8000 sheets per hour.
    • 100 numbers per head per sheet.
    • 110 job memory to store numbering jobs.
    • Up to 4 numbering heads (2 on each shaft).
    • Optional strike perf.
    Part #: GW8000P-DS

    $12375.00

  29. Graphic Whizard Wizard PT 335 SCC Multi Slitter/Cutter/Creaser (PT335SCC)

    • 4" deep pile feeder.
    • Multi accessory output.
    • 9" colour touchscreen.
    • Interchangeable crease/ perf dies.
    • Built in job creator.
    Part #: PT335SCC

    $33687.86

  30. Graphic Whizard Wizard PT335-B Multi Automatic Creaser (PT335B)

    • 4" vacuum pile feeder.
    • Easy to use LCD screen and keyboard.
    • Speeds up to 4500 sheets per hour.
    • Ability to perforate in both directions in one pass.
    • Quick and easy job changeover.
    Part #: PT335B

    $12245.00

Items 1-15 of 22

Display Type List Grid
Page:   1   100   240   250   260   270   280   290   300   310   320   329   330   331   332   333   334   335   336   337   338   339   340   341   342   343   344   345   346   347   348   349   350   351   352   353   354   355   356   357   358   360   370   380   390   400   410   420   430   440   500   600   700   800   900   1,000   1,091