Product listing: Lithco PVC 75 Gauge 16" X 500' Centerfold Shrink Film (MIS-PVC1675500) to Logan Do-It-Yourself Mat Cutting Kit (LGN525)

Page
View by: Title (A-Z)  |  Title (Z-A)  |  Price (High-to-Low)  |  Price (Low-to-High)  |  Popularity  |  Best Sellers  |  Category  |  Product Number
  1. Lithco PVC 75 Gauge 16" X 500' Centerfold Shrink Film (MIS-PVC1675500)

    • Type: PVC Shrink Film
    • Size (W x L): 16" X 500'
    • Gauge: 75
    • Part Number: MIS-PVC1675500
    • A balance oriented film with equal shrinkage in both machine and transverse directions.
    Part #: MIS-PVC1675500

    $63.50

  2. Lithco PVC 75 Gauge 18" X 2000' Centerfold Shrink Film (MIS-PVC1875)

    • Type: PVC Shrink Film
    • Size (W x L): 18" X 2000'
    • Gauge: 75
    • Part Number: MIS-PVC1875
    • A balance oriented film with equal shrinkage in both machine and transverse directions.
    Part #: MIS-PVC1875

    $132.50

  3. Lithco PVC 75 Gauge 18" X 500' Centerfold Shrink Film (MIS-PVC1875500)

    • Type: PVC Shrink Film
    • Size (W x L): 18" X 500'
    • Gauge: 75
    • Part Number: MIS-PVC1875500
    • A balance oriented film with equal shrinkage in both machine and transverse directions.
    Part #: MIS-PVC1875500

    $69.50

  4. Lithco PVC 75 Gauge 2000' Centerfold Shrink Film (MIS-PVC75)

    • Type: PVC Shrink Film
    • Width): 10" - 18"
    • Length: 2000'
    • Gauge: 75
    • A balance oriented film with equal shrinkage in both machine and transverse directions.
    Part #: MIS-PVC75

    $73.50

  5. Lithco PVC 75 Gauge 500' Centerfold Shrink Film (MIS-PVC75500)

    • Type: PVC Shrink Film
    • Width): 10" - 18"
    • Length: 500'
    • Gauge: 75
    • A balance oriented film with equal shrinkage in both machine and transverse directions.
    Part #: MIS-PVC75500

    $53.50

  6. Logan 2000 Push-Style Bevel Handheld Mat Cutter (LGN2000)

    • Push style cutter with retractable blade.
    • Start and stop indicator.
    • Fully upgradable to most Logan rail and board mounted systems.
    • Includes five extra blades.
    • Replacement blade #270.
    Part #: LGN2000

    $25.75

  7. Logan 24" Team System Plus Mat Cutter - 424-1 (LGN424-1)

    • Size: 24" (61cm)
    • Includes a 302-1 Logan Push Style Bevel Mat Cutter for accurate, high quality mat cutting plus a three depth position mat knife with a slip lock depth.
    • Has a non-slip rubberized base, US or metric ruled straight edge, and a Logan Handheld Mat Cutter.
    • Uses Logan 270 blade.
    • Can also be used with Logan Glass Cutter or Straight Cutter.
    Part #: LGN424-1

    $46.11

  8. Logan 40" Team System Plus Mat Cutter - 440-1 (LGN440-1)

    • Size: 40" (101cm)
    • Includes a 302-1 Logan Push Style Bevel Mat Cutter for accurate, high quality mat cutting plus a three depth position mat knife with a slip lock depth.
    • Has a non-slip rubberized base, US or metric ruled straight edge, and a Logan Handheld Mat Cutter.
    • Uses Logan 270 blade.
    • Can also be used with Logan Glass Cutter or Straight Cutter.
    Part #: LGN440-1

    $61.03

  9. Logan 4000 Deluxe Pull-Style Bevel Handheld Mat Cutter (LGN4000)

    • Heavy-duty pull style cutter with pivoting blade holder.
    • Start and stop indicator.
    • Border measuring bar.
    • Fully upgradable to most Logan rail and board mounted systems.
    • Includes five extra blades
    Part #: LGN4000

    $38.65

  10. Logan 5000 8-Ply Bevel Handheld Mat Cutter (LGN5000)

    • Features an adjustable depth magnetic blade holding magazine.
    • Has an ergonomic grip with adjustable nylon guides for use with various Logan straight edges and mat cutters.
    • Start and stop indicators for zero overcuts.
    • Uses Logan #271 blade.
    • Features an adjustable depth magnetic blade holding magazine.
    Part #: LGN5000

    $56.96

  11. Logan 8 Ply Replacement Blades for Framer's Edge Elite Mat Cutter - 100pk (LGN268-100)

    • Use with Logan Framers Edge Elite Series (specialty blade for use on double thick 8 ply mat board).
    • Best way to cut a great mat is with a sharp blade.
    • Specifically sharpened to give a professional finished edge to a mat.
    • Fits With: Logan 650-1, 655-1 & 660-1 Framer’s Edge Elite.
    • Comes in Box (20 packs of 5 each).
    Part #: LGN268-100

    $24.67

  12. Logan Acrylic Plastic Cutter from Graphics - 709-1 (LGN709-1)

    • Hand held cutting tool for cutting plastic & acrylic sheets.
    • Inexpensive & handy for quick sizing in general framing.
    • Use in conjunction with suitable straight edge or most Logan equipment (including Team System Plus, Compact, Artist and Simplex series).
    • Features a fold back blade and can be used with most Logan board mount mat cutters or any suitable straight edge.
    • Hand held cutting tool for cutting plastic & acrylic sheets.
    Part #: LGN709-1

    $10.65

  13. Logan Adapt-A-Rule 24" Guiderail (LGN524)

    • Size: 24" (61cm)
    • Includes a non-slip rubberized base and US or metric ruled guides.
    • Upgrade kit including nylon guides and screws.
    • Compatible with Handheld Mat Cutter models 2000 Push Style or 4000 Deluxe Pull Style, Straight Cutter, Glass Cutter, or Mat Knife.
    • Size: 24" (61cm)
    Part #: LGN524

    $28.55

  14. Logan Adapt-A-Rule 40" Guiderail (LGN540)

    • Size: 40" (101cm)
    • Includes a non-slip rubberized base and US or metric ruled guides.
    • Upgrade kit including nylon guides and screws.
    • Compatible with Handheld Mat Cutter models 2000 Push Style or 4000 Deluxe Pull Style, Straight Cutter, Glass Cutter, or Mat Knife.
    • Size: 40" (101cm)
    Part #: LGN540

    $44.14

  15. Logan Adapt-A-Rule 60" Guiderail (LGN560)

    • Size: 60" (152cm)
    • Includes a C-clamp.
    • Upgrade kit including nylon guides and screws.
    • Compatible with Handheld Mat Cutter models 2000 Push Style or 4000 Deluxe Pull Style, Straight Cutter, Glass Cutter, or Mat Knife.
    • Size: 60" (152cm)
    Part #: LGN560

    $56.96

  16. Logan Adapt-A-Rule Guiderails (LGNAARG)

    • Sizes: 24" (61cm), 40" (101cm) and 60" (152cm)
    • The 24" (61cm) and 40" (101cm) models includes a non-slip rubberized base and US or metric ruled guides and 60" (152cm) model includes a C-clamp.
    • Upgrade kit including nylon guides and screws.
    • Compatible with Handheld Mat Cutter models 2000 Push Style or 4000 Deluxe Pull Style, Straight Cutter, Glass Cutter, or Mat Knife.
    • Sizes: 24" (61cm), 40" (101cm) and 60" (152cm)
    Part #: LGNAARG

    $28.55

  17. Logan Air-Matic Dual Drive Point Driver (F500-4)

    • Designed to quickly drive either rigid or flexible points pneumatically using a common air compressor at 52 psi.
    • Used in picture framing for securing glazing, mounted art and backing material into wood frame moulding.
    • Fast repeat firing for high production framing.
    • Approximately 300 point magazine capacity.
    • Includes 100 rigid points and 100 flex points
    Part #: F500-4

    $122.14

  18. Logan Artist Elite 40" Mat Cutter from Graphics (450-1)

    • 40" (101 cm) capacity
    • Bevel and straight cutting heads
    • Hinged aluminum guide rail
    • Two guide rail production stops
    • Squaring bar to hold mat board square
    Part #: 450-1

    $238.83

  19. Logan Compact Classic 32" Mat Cutter from Graphics (301-1)

    • 32" (81.3cm) capacity
    • Bevel cutting head and mat knife for straight cuts
    • Parallel mat guide
    • Spring loaded guide rail
    • Built-in carry handle in box
    Part #: 301-1

    $116.00

  20. Logan Compact Elite 32" Mat Cutter from Graphics (350-1)

    • 32" (81.3cm) capacity
    • Bevel and straight cutting heads
    • Parallel mat guide
    • Hinged guide rail with production stops
    • Squaring bar
    Part #: 350-1

    $146.54

  21. Logan COS-Tools Channel Rail (XT3001)

    • 32" Channel Rail.
    • Features include a straight edge to guide you cuts, and a ruler to measure them.
    • Compatible with Cos-Tools Straight/Bevel Cutter and V-Groove Cutter.
    • Part Number: XT3001
    • 32" Channel Rail.
    Part #: XT3001

    $23.80

  22. Logan COS-Tools Circle Cutter (XTA8001)

    • Cut perfect circles from 1″ to 6″ diameters in suitable Cosplay materials
    • Center depth indicator shows blade progression for board depths from 1/8" to 1/2" (3.1mm to 12.7mm).
    • Features dual inch/metric rail, centering pin, magnetic blade slot and clear acrylic safety dome.
    • Includes five blades. Use replacement blades WA-5 or WA-20.
    • 90 Days Warranty
    Part #: XTA8001

    $30.84

  23. Logan COS-Tools Freestyle Cutter (XTB6020)

    • Easy to use, just insert the blade into the board and push to follow the desired shape.
    • Features ergonomic handle, on-board blade storage compartment, blade safety shield and two blades.
    • The Freestyle Cutter works with 3/16" (5mm) foam board.
    • Use replacement blades WB-5 or WB-20.
    • 90 Days Warranty
    Part #: XTB6020

    $12.18

  24. Logan COS-Tools Hole Drill (XT8011)

    • Drill perfect holes in suitable cosplay material
    • Includes one of three interchangeable quick-change drill tips
    • Choose one 3/4", 1/2" or 0.28" (7mm, 12.7mm, or 19mm diameter) drill tips.
    • Works with suitable Cosplay material up to 3/16” thick.
    • Feature quick change blades and ergonomic designs.
    Part #: XT8011

    $23.80

  25. Logan COS-Tools Knife (XTD30)

    • Hand held adjustable depth utility knife.
    • Snap off blade.
    • Solid locking mechanism for consistent depth settings.
    • Used to size suitable Cosplay materials.
    • Must have scrap foamboard under material as underlayment.
    Part #: XTD30

    $7.10

  26. Logan COS-Tools Starter Kit (XT1000)

    • XT3000 Channel Rail:
    • 20" Channel Rail.
    • Features include a straight edge to guide you cuts, and a ruler to measure them.
    • Compatible with Cos-Tools Straight/Bevel Cutter and V-Groove Cutter.
    • XT8011 Hole Drill:
    Part #: XT1000

    $44.30

  27. Logan COS-Tools Straight Cutter (XTC6001)

    • Cut perfect 90 degree straight edges on any depth of suitable Cosplay materials up to 1/2″
    • Features adjustable blade depth, quick change blade clip, magnetic blade slot, on-board blade storage drawer and five blades.
    • Use with FoamWerks Channel Rail, Logan Adapt-A-Rule or Team System.
    • Use replacement blades WC-5 or WC-20.
    • 90 Days Warranty
    Part #: XTC6001

    $26.44

  28. Logan COS-Tools Straight/Bevel Cutter (XTC6010)

    • Economy and versatility.
    • Features include adjustable blade depth, ergonomic handle and on-board blade storage.
    • For use on suitable Cosplay materials up top 3/16” thick.
    • Simply rotate the angled base block to transform from a 90 degree straight cutter to a 45 degree bevel cutter.
    • Includes two blades and can be used with any suitable straight edge.
    Part #: XTC6010

    $12.18

  29. Logan COS-Tools V-Groove Cutter (XTC2001)

    • Features include adjustable blade depth, quick change blade clips, magnetic blade slot, on-board blade storage drawer and five blades.
    • Cuts V-grooves in suitable Cosplay materials to perfection
    • Use with FoamWerks Channel Rail, Logan Adapt-A-Rule or Team System.
    • Use replacement blades WC-5 or WC-20.
    • 90 Days Warranty
    Part #: XTC2001

    $21.68

  30. Logan Do-It-Yourself Mat Cutting Kit (LGN525)

    • Complete mat cutting start-up kit.
    • Includes a 24" Adapt-a-Rule with push style bevel cutting head.
    • Mat knife for downsizing mat board.
    • 10 pieces of various color 8×10 practice mat board.
    • A copy of Logan #238 How to Cut Mats book, decorative transfers for enhancing your mats plus ten extra blades.
    Part #: LGN525

    $56.04

Items 1-15 of 22

Display Type List Grid
Page:   1   100   250   260   270   280   290   300   310   320   330   335   336   337   338   339   340   341   342   343   344   345   346   347   348   349   350   351   352   353   354   355   356   357   358   359   360   361   362   363   364   370   380   390   400   410   420   430   440   500   600   700   800   900   1,000