My Cart
    Questions? 1-800-944-4573 1-800-944-4573 Call to Order
    Search
    Menu

    Product listing: Keencut ARC and TE Replacement Cutting Head (1 pk) (69122) to Keencut Excalibur 3S 63" Vertical Multi-Substrate Cutter (60373)

    Page
    View by: Title (A-Z)  |  Title (Z-A)  |  Price (High-to-Low)  |  Price (Low-to-High)  |  Popularity  |  Best Sellers  |  Category  |  Product Number
    1. Keencut ARC and TE Replacement Cutting Head (1 pk) (69122) Image 1

      Keencut ARC and TE Replacement Cutting Head (1 pk) (69122)

      • Work with: Advanced Rotary Cutter (ARC) & Table Edge Trimmer (TE)
      • Quantity: 1pk
      • Part Number: 69122
      • Work with Advanced Rotary Cutter (ARC) & Table Edge Trimmer (TE)
      • Complete cutting head with cutting wheels attached.
      Part #: 69122

      $166.50

    2. Keencut ARC and TE Replacement Cutting Wheels (1 Set) (69124) Image 1

      Keencut ARC and TE Replacement Cutting Wheels (1 Set) (69124)

      • Work with: ARC & TE trimmers
      • Quantity: 1 set per pack
      • Part Number: 69124
      • Work with ARC & TE trimmers
      • Cutting wheels can only be used with the black cutting head
      Part #: 69124

      $139.29

    3. Keencut AZTC Heat Knife Carrier (60399) Image 1

      Keencut AZTC Heat Knife Carrier (60399)

      • Designed specifically for fabric graphics cutting and finishing
      • Fits on the Sabre, Sabre 2, Evolution and Evolution-E2 cutter bars
      • The carrier device accepts the AZTC heat knives and blades.
      • Designed specifically for fabric graphics cutting and finishing,
      • The carrier device accepts the AZTC heat knives and blades.
      Part #: 60399

      $255.36

    4. Keencut Big Bench Xtra 112" Cutting Table Workstation (60934) Image 1

      Keencut Big Bench Xtra 112" Cutting Table Workstation (60934)

      • Position or remove your Javelin Xtra cutter in seconds without using a single tool.
      • Lift & hold levers allow a single operator to feed, align and cut materials with ease.
      • Aluminum base-plate with metric parallel indents and cut groove.
      • Full length Metric & Imperial scale.
      • Full-length grip strip for clamping.
      Part #: 60934

      $1156.50

    5. Keencut Big Bench Xtra 132" Cutting Table Workstation (60936) Image 1

      Keencut Big Bench Xtra 132" Cutting Table Workstation (60936)

      • Position or remove your Javelin Xtra cutter in seconds without using a single tool.
      • Lift & hold levers allow a single operator to feed, align and cut materials with ease.
      • Aluminum base-plate with metric parallel indents and cut groove.
      • Full length Metric & Imperial scale.
      • Full-length grip strip for clamping.
      Part #: 60936

      $1237.50

    6. Keencut Big Bench Xtra 53" Cutting Table Workstation (60928) Image 1

      Keencut Big Bench Xtra 53" Cutting Table Workstation (60928)

      • Position or remove your Javelin Xtra cutter in seconds without using a single tool.
      • Lift & hold levers allow a single operator to feed, align and cut materials with ease.
      • Aluminum base-plate with metric parallel indents and cut groove.
      • Full length Metric & Imperial scale.
      • Full-length grip strip for clamping.
      Part #: 60928

      $738.00

    7. Keencut Big Bench Xtra 73" Cutting Table Workstation (60930) Image 1

      Keencut Big Bench Xtra 73" Cutting Table Workstation (60930)

      • Position or remove your Javelin Xtra cutter in seconds without using a single tool.
      • Lift & hold levers allow a single operator to feed, align and cut materials with ease.
      • Aluminum base-plate with metric parallel indents and cut groove.
      • Full length Metric & Imperial scale.
      • Full-length grip strip for clamping.
      Part #: 60930

      $819.00

    8. Keencut Big Bench Xtra 92" Cutting Table Workstation (60932) Image 1

      Keencut Big Bench Xtra 92" Cutting Table Workstation (60932)

      • Position or remove your Javelin Xtra cutter in seconds without using a single tool.
      • Lift & hold levers allow a single operator to feed, align and cut materials with ease.
      • Aluminum base-plate with metric parallel indents and cut groove.
      • Full length Metric & Imperial scale.
      • Full-length grip strip for clamping.
      Part #: 60932

      $1081.80

    9. Keencut Big Bench Xtra Cutting Table Workstation (FK-BBXCTW) Image 1

      Keencut Big Bench Xtra Cutting Table Workstation (FK-BBXCTW)

      • Position or remove your Javelin Xtra cutter in seconds without using a single tool.
      • Lift & hold levers allow a single operator to feed, align and cut materials with ease.
      • Aluminum base-plate with metric parallel indents and cut groove.
      • Full length Metric & Imperial scale.
      • Full-length grip strip for clamping.
      Part #: FK-BBXCTW

      $738.00

    10. Keencut Composite Twin Wheel Cutter Head for Excalibur 5000 and 1000x Cutters (1pk) (69125) Image 1

      Keencut Composite Twin Wheel Cutter Head for Excalibur 5000 and 1000x Cutters (1pk) (69125)

      • Work with: Excalibur 5000 and 1000x Cutters
      • Quantity: 1 Per Pack
      • Part Number: 69125
      • Work with Excalibur 5000 and 1000x Cutters
      • Shears 1/8" Masonite, heavy mat board and 3/8" PVC board
      Part #: 69125

      $176.43

    11. Keencut Creaser Tool Head for Evolution3 Series Cutters (61395) Image 1

      Keencut Creaser Tool Head for Evolution3 Series Cutters (61395)

      • Works with Evolution3 Series Cutters
      • Adjustable pressure to suit a range of materials.
      • Creases corrugated and plain card.
      • Works with Evolution3 Series Cutters
      • Creases corrugated and plain card.
      Part #: 61395

      $255.36

    12. Keencut Evolution 2 Bench (FK-E2B) Image 1

      Keencut Evolution 2 Bench (FK-E2B)

      • Aluminum base plate for easy alignment of the Evolution-E2 mounting brackets.
      • Unique leg to beam fixing brackets apply incredible strength to Evolution 2 Benches.
      • Adjustable feet allow the bench to be installed on uneven floors without compromising accuracy.
      • Once the Evolution-E2 is installed, only one 3/4" thick worktop is needed to bring the cutter base level to the worktop (worktop not included, 3/4" MDF or finished plywood recommended).
      • When not in use, the cutter bar’s swing-over capability allows it to be folded under the Evolution 2 Bench, resulting in an unobstructed workbench surface.
      Part #: FK-E2B

      $580.50

    13. Keencut Evolution3 104" BenchTop Cutter (61288) Image 1

      Keencut Evolution3 104" BenchTop Cutter (61288)

      • Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
      • The Lift-and-Hover saves time and avoids mistakes allowing users to line up their cuts quicker and more accurately.
      • Site line strip enables operators to see exactly where the cut line is.
      • The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
      • Anti-sag system holds the cutter bar level for accurate line-up.
      Part #: 61288

      $1539.00

    14. Keencut Evolution3 104" FreeHand Cutter Bar (61278) Image 1

      Keencut Evolution3 104" FreeHand Cutter Bar (61278)

      • Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
      • Site line strip enables operators to see exactly where the cut line is.
      • The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
      • Anti-sag system holds the cutter bar level for accurate line-up.
      • Minimal setup: calibrated 'out of the box' accuracy.
      Part #: 61278

      $1206.00

    15. Keencut Evolution3 104" SmartFold Cutter (61388) Image 1

      Keencut Evolution3 104" SmartFold Cutter (61388)

      • Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
      • The Lift-and-Hover saves time and avoids mistakes allowing users to line up their cuts quicker and more accurately.
      • Site line strip enables operators to see exactly where the cut line is.
      • The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
      • Swing-down under-bench storage to leave work surface clear.
      Part #: 61388

      $2007.00

    16. Keencut Evolution3 124" BenchTop Cutter (61289) Image 1

      Keencut Evolution3 124" BenchTop Cutter (61289)

      • Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
      • The Lift-and-Hover saves time and avoids mistakes allowing users to line up their cuts quicker and more accurately.
      • Site line strip enables operators to see exactly where the cut line is.
      • The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
      • Anti-sag system holds the cutter bar level for accurate line-up.
      Part #: 61289

      $1777.50

    17. Keencut Evolution3 124" FreeHand Cutter Bar (61279) Image 1

      Keencut Evolution3 124" FreeHand Cutter Bar (61279)

      • Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
      • Site line strip enables operators to see exactly where the cut line is.
      • The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
      • Anti-sag system holds the cutter bar level for accurate line-up.
      • Minimal setup: calibrated 'out of the box' accuracy.
      Part #: 61279

      $1287.00

    18. Keencut Evolution3 124" SmartFold Cutter (61389) Image 1

      Keencut Evolution3 124" SmartFold Cutter (61389)

      • Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
      • The Lift-and-Hover saves time and avoids mistakes allowing users to line up their cuts quicker and more accurately.
      • Site line strip enables operators to see exactly where the cut line is.
      • The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
      • Swing-down under-bench storage to leave work surface clear.
      Part #: 61389

      $2236.50

    19. Keencut Evolution3 142" BenchTop Cutter (61290) Image 1

      Keencut Evolution3 142" BenchTop Cutter (61290)

      • Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
      • The Lift-and-Hover saves time and avoids mistakes allowing users to line up their cuts quicker and more accurately.
      • Site line strip enables operators to see exactly where the cut line is.
      • The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
      • Anti-sag system holds the cutter bar level for accurate line-up.
      Part #: 61290

      $2083.50

    20. Keencut Evolution3 142" SmartFold Cutter (61390) Image 1

      Keencut Evolution3 142" SmartFold Cutter (61390)

      • Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
      • The Lift-and-Hover saves time and avoids mistakes allowing users to line up their cuts quicker and more accurately.
      • Site line strip enables operators to see exactly where the cut line is.
      • The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
      • Swing-down under-bench storage to leave work surface clear.
      Part #: 61390

      $2601.00

    21. Keencut Evolution3 44" BenchTop Cutter (61285) Image 1

      Keencut Evolution3 44" BenchTop Cutter (61285)

      • Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
      • The Lift-and-Hover saves time and avoids mistakes allowing users to line up their cuts quicker and more accurately.
      • Site line strip enables operators to see exactly where the cut line is.
      • The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
      • Anti-sag system holds the cutter bar level for accurate line-up.
      Part #: 61285

      $1152.00

    22. Keencut Evolution3 44" FreeHand Cutter Bar (61275) Image 1

      Keencut Evolution3 44" FreeHand Cutter Bar (61275)

      • Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
      • Site line strip enables operators to see exactly where the cut line is.
      • The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
      • Anti-sag system holds the cutter bar level for accurate line-up.
      • Minimal setup: calibrated 'out of the box' accuracy.
      Part #: 61275

      $868.50

    23. Keencut Evolution3 44" SmartFold Cutter (61384) Image 1

      Keencut Evolution3 44" SmartFold Cutter (61384)

      • Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
      • The Lift-and-Hover saves time and avoids mistakes allowing users to line up their cuts quicker and more accurately.
      • Site line strip enables operators to see exactly where the cut line is.
      • The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
      • Swing-down under-bench storage to leave work surface clear.
      Part #: 61384

      $1503.00

    24. Keencut Evolution3 64" BenchTop Cutter (61286) Image 1

      Keencut Evolution3 64" BenchTop Cutter (61286)

      • Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
      • The Lift-and-Hover saves time and avoids mistakes allowing users to line up their cuts quicker and more accurately.
      • Site line strip enables operators to see exactly where the cut line is.
      • The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
      • Anti-sag system holds the cutter bar level for accurate line-up.
      Part #: 61286

      $1269.00

    25. Keencut Evolution3 64" FreeHand Cutter Bar (61276) Image 1

      Keencut Evolution3 64" FreeHand Cutter Bar (61276)

      • Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
      • Site line strip enables operators to see exactly where the cut line is.
      • The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
      • Anti-sag system holds the cutter bar level for accurate line-up.
      • Minimal setup: calibrated 'out of the box' accuracy.
      Part #: 61276

      $949.50

    26. Keencut Evolution3 64" SmartFold Cutter (61386) Image 1

      Keencut Evolution3 64" SmartFold Cutter (61386)

      • Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
      • The Lift-and-Hover saves time and avoids mistakes allowing users to line up their cuts quicker and more accurately.
      • Site line strip enables operators to see exactly where the cut line is.
      • The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
      • Swing-down under-bench storage to leave work surface clear.
      Part #: 61386

      $1656.00

    27. Keencut Evolution3 84" BenchTop Cutter (61287) Image 1

      Keencut Evolution3 84" BenchTop Cutter (61287)

      • Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
      • The Lift-and-Hover saves time and avoids mistakes allowing users to line up their cuts quicker and more accurately.
      • Site line strip enables operators to see exactly where the cut line is.
      • The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
      • Anti-sag system holds the cutter bar level for accurate line-up.
      Part #: 61287

      $1399.50

    28. Keencut Evolution3 84" FreeHand Cutter Bar (61277) Image 1

      Keencut Evolution3 84" FreeHand Cutter Bar (61277)

      • Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
      • Site line strip enables operators to see exactly where the cut line is.
      • The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
      • Anti-sag system holds the cutter bar level for accurate line-up.
      • Minimal setup: calibrated 'out of the box' accuracy.
      Part #: 61277

      $1048.50

    29. Keencut Evolution3 84" SmartFold Cutter (61387) Image 1

      Keencut Evolution3 84" SmartFold Cutter (61387)

      • Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
      • The Lift-and-Hover saves time and avoids mistakes allowing users to line up their cuts quicker and more accurately.
      • Site line strip enables operators to see exactly where the cut line is.
      • The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
      • Swing-down under-bench storage to leave work surface clear.
      Part #: 61387

      $1827.00

    30. Keencut Excalibur 3S 63" Vertical Multi-Substrate Cutter (60373) Image 1

      Keencut Excalibur 3S 63" Vertical Multi-Substrate Cutter (60373)

      • Operators can quickly access all 3 cutting tools as they are attached to the cutting head:
      • Composite twin wheel cutting head
      • Standard utility blade
      • Scoring blade for acrylic
      • No wasted panels no mistakes guessing where the cut line is.
      Part #: 60373

      $3096.00

    Items 1-15 of 22

    Display Type List Grid
    Page:   1   100   290   300   310   320   330   340   350   360   370   375   376   377   378   379   380   381   382   383   384   385   386   387   388   389   390   391   392   393   394   395   396   397   398   399   400   401   402   403   404   410   420   430   440   450   460   470   480   500   600   700   800   900   1,000   1,089