Product listing: Keencut 48" Ultimat Gold Mat Cutter (61212) to Keencut 90cm Laser Trued Safety Straight Edge (60012)

Page
View by: Title (A-Z)  |  Title (Z-A)  |  Price (High-to-Low)  |  Price (Low-to-High)  |  Popularity  |  Best Sellers  |  Category  |  Product Number
  1. Keencut 48" Ultimat Gold Mat Cutter (61212)

    • Sculpted precision cutting head for comfort and precise cutting.
    • Bevel head with ejector and lock for quick blade changing.
    • Unique 'clip on' margin guide and squaring arm allows for easy removal when not in use; no tools required maximum margin width is 19cm (7.5").
    • Unique roller 'lift and hold' system raises or lowers the cutter bar and frees both hands.
    • 75cm (30') clip on matguide extension kit complete with 60cm support arms.
    Part #: 61212

    $1876.50

  2. Keencut 50" Futura Safety Flexo Plate Cutter Series 2 (61912)

    • Designed specifically for cutting flexo printing plates.
    • Eliminates the onerous task of hand beveling, minimizes the risk of injury from remakes and bad cuts.
    • Perfectly designed for cutting and trimming floor graphics or other materials requiring seamless splices.
    • High performance self-aligning steel roller bearings operate on twin steel tracks.
    • Designed for a lifetime of straight, accurate, silent cutting. Can handle dense, hard-to-cut materials with no flex, side play or hooks.
    Part #: 61912

    $1615.50

  3. Keencut 54" Laser Trued Safety Straight Edge (60005)

    • Lightweight anodized aluminum frame.
    • Embedded steel edge for lasting accuracy.
    • Full-length metric & imperial scale.
    • Two full-length silicone grip cords protect and clamp your materials.
    • Laser-trued
    Part #: 60005

    $117.00

  4. Keencut 60.5" Flexo Futura Cutter (61816)

    • Cutting head is mounted on roller bearings running on steel tracks.
    • 20 year warranty on the bearings.
    • Easy to change blade cartridges for switching between cutting materials in seconds.
    • Ergonomically designed cutting head makes it easy to use over long periods - comfortable for left or right-handed users.
    • The cutting head has two blade holders, a vertical cutter on the right hand side and a bevel cutter on the left.
    Part #: 61816

    $1458.00

  5. Keencut 60.5" Ultimat Gold Mat Cutter (61214)

    • Sculpted precision cutting head for comfort and precise cutting.
    • Bevel head with ejector and lock for quick blade changing.
    • Unique 'clip on' margin guide and squaring arm allows for easy removal when not in use; no tools required maximum margin width is 19cm (7.5").
    • Unique roller 'lift and hold' system raises or lowers the cutter bar and frees both hands.
    • 75cm (30") clip on matguide extension kit complete with 60cm support arms.
    Part #: 61214

    $1971.00

  6. Keencut 60" Advanced Rotary Cutter (ARC) (60609)

    • Unique sub-surface monorail bearing system.
    • Twin rotary blades and full-length fixed blade strip.
    • Large diameter cutting wheels to prevent them from jumping up on top of the blade.
    • Heavy duty plastic cutting head.
    • Two integral roller clamps and full-length fixed blade strip.
    Part #: 60609

    $607.50

  7. Keencut 60" Laser Trued Safety Straight Edge (60006)

    • Lightweight anodized aluminum frame.
    • Embedded steel edge for lasting accuracy.
    • Full-length metric & imperial scale.
    • Two full-length silicone grip cords protect and clamp your materials.
    • Laser-trued
    Part #: 60006

    $126.00

  8. Keencut 60" Sabre 2 General Purpose Cutter (60736)

    • Rear loading blade holder for swift replacement; blades will never pull out in heavy materials.
    • Fully equipped and ready to work with 10 medium duty blades included. Accepts standard utility blades.
    • Integral base-plate with metric parallel indents and a cut groove.
    • Self-levelling hinges for materials up to 13mm (1/2").
    • Quick fit thread cap for easy accessory attachment.
    Part #: 60736

    $936.00

  9. Keencut 60" Table Edge Rotary Cutter (TE) - 60631 - Open Box (MYR-19-188-8)

    • Unique sub-surface monorail bearing system.
    • Twin rotary blades and full-length fixed blade strip.
    • Large diameter cutting wheels to prevent them from jumping up on top of the blade.
    • Heavy duty plastic cutting head.
    • Two integral roller clamps and full-length fixed blade strip.
    Part #: MYR-19-188-8

    $450.00

  10. Keencut 60" Table Edge Rotary Cutter (TE) (60631)

    • Unique sub-surface monorail bearing system.
    • Twin rotary blades and full-length fixed blade strip.
    • Large diameter cutting wheels to prevent them from jumping up on top of the blade.
    • Heavy duty plastic cutting head.
    • Two integral roller clamps and full-length fixed blade strip.
    Part #: 60631

    $450.00

  11. Keencut 60cm Laser Trued Safety Straight Edge (60010)

    • Lightweight anodized aluminum frame.
    • Embedded steel edge for lasting accuracy.
    • Full-length metric & imperial scale.
    • Two full-length silicone grip cords protect and clamp your materials.
    • Laser-trued
    Part #: 60010

    $63.00

  12. Keencut 63" Excalibur 5000 Substrate Cutter (60376)

    • Ready mounted integral tools with rotating wheel for maximum convenience.
    • Control for cutting rigid PVC up to 1/2" thick.
    • Fitted counterbalance for less fatigue, addicents, and easy loading of materials.
    • Single cut line and sightline strip for maximum accuracy with all tools.
    • Twin-Wheel cutting head for shearing 1/8" Uncoated Masonite, heavy mat board and 3/8" Sintra.
    Part #: 60376

    $3204.00

  13. Keencut 64" Evolution 2 Bench (60950)

    • Aluminum base plate for easy alignment of the Evolution-E2 mounting brackets.
    • Unique leg to beam fixing brackets apply incredible strength to Evolution 2 Benches.
    • Adjustable feet allow the bench to be installed on uneven floors without compromising accuracy.
    • Once the Evolution-E2 is installed, only one 3/4" thick worktop is needed to bring the cutter base level to the worktop (worktop not included, 3/4" MDF or finished plywood recommended).
    • When not in use, the cutter bar’s swing-over capability allows it to be folded under the Evolution 2 Bench, resulting in an unobstructed workbench surface.
    Part #: 60950

    $666.00

  14. Keencut 64" Evolution-E2 Precision Cutter (60386)

    • Single handed positions, cutting, and clamping.
    • Straight and accurate cuts to within 0.008" by adjustable levelers.
    • Integral extruded alloy cutting base.
    • 5 year general warranty on all parts (except blades).
    • 20 year warranty on cutting bearings.
    Part #: 60386

    $1534.50

  15. Keencut 64" Futura Safety Flexo Plate Cutter Series 2 (61916)

    • Designed specifically for cutting flexo printing plates.
    • Eliminates the onerous task of hand beveling, minimizes the risk of injury from remakes and bad cuts.
    • Perfectly designed for cutting and trimming floor graphics or other materials requiring seamless splices.
    • High performance self-aligning steel roller bearings operate on twin steel tracks.
    • Designed for a lifetime of straight, accurate, silent cutting. Can handle dense, hard-to-cut materials with no flex, side play or hooks.
    Part #: 61916

    $1705.50

  16. Keencut 64" Simplex Sheet Material Cutter (60456)

    • Rear loading blade holder for swift replacement; blades will never pull out in heavy materials.
    • Fully equipped and ready to work with 100 medium duty blades included. Accepts standard utility blades.
    • The lightweight extrusion design makes the Simplex an ideal general purpose cutter.
    • Quick fit thread cap for easy accessory attachment.
    • Blade locking thumb screw adds safety and convenience.
    Part #: 60456

    $517.50

  17. Keencut 72" Laser Trued Safety Straight Edge (60007)

    • Lightweight anodized aluminum frame.
    • Embedded steel edge for lasting accuracy.
    • Full-length metric & imperial scale.
    • Two full-length silicone grip cords protect and clamp your materials.
    • Laser-trued
    Part #: 60007

    $139.50

  18. Keencut 75" AZTC Hot Cut System (61727)

    • Hot Cut Size: 75”
    • Includes: Cutter bar, Heat Knife Carrier and Silicone tape
    • Optional: Stand Packages
    • Warranty:
    • 5-year parts warranty (excluding blades, clamp strips, site line strips and cutting wheels).
    Part #: 61727

    $1102.50

  19. Keencut 75" Hot Cut System with HSGM Heat Knife (61747)

    • Type R Blade. This general-use blade (1.14 inches of heated surface) cuts straight lines easily on glass surfaces and is designed for synthetic fabrics, webbing and ropes of up to 17mm diameter.
    • HSO-N Blade. This precision-based pointed blade with 9 mm of heated cutting area is designed for fine fabrics and is useful in projects requiring curved cuts.
    • 1-year limited warranty for manufacturer defects on HSGM heat knives.
    • Cut Size: 75"
    • Warrany: 1 Year limited
    Part #: 61747

    $1557.00

  20. Keencut 75" HSGM Hot Cut System (61737)

    • Hot Cut Size: 75”
    • Includes: Cutter bar, Heat Knife Carrier and Silicone tape
    • Optional: Stand Packages
    • Warranty:
    • 5-year parts warranty (excluding blades, clamp strips, site line strips and cutting wheels).
    Part #: 61737

    $1102.50

  21. Keencut 75cm Laser Trued Safety Straight Edge (60011)

    • Lightweight anodized aluminum frame.
    • Embedded steel edge for lasting accuracy.
    • Full-length metric & imperial scale.
    • Two full-length silicone grip cords protect and clamp your materials.
    • Laser-trued
    Part #: 60011

    $76.50

  22. Keencut 80" Advanced Rotary Cutter (ARC) (60613)

    • Unique sub-surface monorail bearing system.
    • Twin rotary blades and full-length fixed blade strip.
    • Large diameter cutting wheels to prevent them from jumping up on top of the blade.
    • Heavy duty plastic cutting head.
    • Two integral roller clamps and full-length fixed blade strip.
    Part #: 60613

    $706.50

  23. Keencut 80" Sabre 2 General Purpose Cutter (60737)

    • Rear loading blade holder for swift replacement; blades will never pull out in heavy materials.
    • Fully equipped and ready to work with 10 medium duty blades included. Accepts standard utility blades.
    • Integral base-plate with metric parallel indents and a cut groove.
    • Self-levelling hinges for materials up to 13mm (1/2").
    • Quick fit thread cap for easy accessory attachment.
    Part #: 60737

    $1075.50

  24. Keencut 80" Table Edge Rotary Cutter (TE) (60632)

    • Unique sub-surface monorail bearing system.
    • Twin rotary blades and full-length fixed blade strip.
    • Large diameter cutting wheels to prevent them from jumping up on top of the blade.
    • Heavy duty plastic cutting head.
    • Two integral roller clamps and full-length fixed blade strip.
    Part #: 60632

    $540.00

  25. Keencut 84" Evolution 2 Bench (60951)

    • Aluminum base plate for easy alignment of the Evolution-E2 mounting brackets.
    • Unique leg to beam fixing brackets apply incredible strength to Evolution 2 Benches.
    • Adjustable feet allow the bench to be installed on uneven floors without compromising accuracy.
    • Once the Evolution-E2 is installed, only one 3/4" thick worktop is needed to bring the cutter base level to the worktop (worktop not included, 3/4" MDF or finished plywood recommended).
    • When not in use, the cutter bar’s swing-over capability allows it to be folded under the Evolution 2 Bench, resulting in an unobstructed workbench surface.
    Part #: 60951

    $931.50

  26. Keencut 84" Evolution-E2 Precision Cutter (60387)

    • Single handed positions, cutting, and clamping.
    • Straight and accurate cuts to within 0.008" by adjustable levelers.
    • Integral extruded alloy cutting base.
    • 5 year general warranty on all parts (except blades).
    • 20 year warranty on cutting bearings.
    Part #: 60387

    $1674.00

  27. Keencut 84" Futura Safety Flexo Plate Cutter Series 2 (61920)

    • Designed specifically for cutting flexo printing plates.
    • Eliminates the onerous task of hand beveling, minimizes the risk of injury from remakes and bad cuts.
    • Perfectly designed for cutting and trimming floor graphics or other materials requiring seamless splices.
    • High performance self-aligning steel roller bearings operate on twin steel tracks.
    • Designed for a lifetime of straight, accurate, silent cutting. Can handle dense, hard-to-cut materials with no flex, side play or hooks.
    Part #: 61920

    $1885.50

  28. Keencut 84" Simplex Sheet Material Cutter FK (60457)

    • Rear loading blade holder for swift replacement; blades will never pull out in heavy materials.
    • Fully equipped and ready to work with 100 medium duty blades included. Accepts standard utility blades.
    • The lightweight extrusion design makes the Simplex an ideal general purpose cutter.
    • Quick fit thread cap for easy accessory attachment.
    • Blade locking thumb screw adds safety and convenience.
    Part #: 60457

    $558.00

  29. Keencut 86" Flexo Futura Cutter (61820)

    • Cutting head is mounted on roller bearings running on steel tracks.
    • 20 year warranty on the bearings.
    • Easy to change blade cartridges for switching between cutting materials in seconds.
    • Ergonomically designed cutting head makes it easy to use over long periods - comfortable for left or right-handed users.
    • The cutting head has two blade holders, a vertical cutter on the right hand side and a bevel cutter on the left.
    Part #: 61820

    $1615.50

  30. Keencut 90cm Laser Trued Safety Straight Edge (60012)

    • Lightweight anodized aluminum frame.
    • Embedded steel edge for lasting accuracy.
    • Full-length metric & imperial scale.
    • Two full-length silicone grip cords protect and clamp your materials.
    • Laser-trued
    Part #: 60012

    $90.00

Items 1-15 of 22

Display Type List Grid
Page:   1   100   290   300   310   320   330   340   350   360   370   381   382   383   384   385   386   387   388   389   390   391   392   393   394   395   396   397   398   399   400   401   402   403   404   405   406   407   408   409   410   420   430   440   450   460   470   480   490   500   600   700   800   900   1,000   1,100   1,106