Product listing: Drytac MediaTac 38" x 328' Pressure Sensitive Aqueous Adhesive - Mounting Adhesives (PSA26-38328) to Drytac Dust Removal System Pads - 5 Pads (50 sheets/pad) - Laminating Accessories (PCRPAD-5)

Page
View by: Title (A-Z)  |  Title (Z-A)  |  Price (High-to-Low)  |  Price (Low-to-High)  |  Popularity  |  Best Sellers  |  Category  |  Product Number
  1. Drytac MediaTac 38" x 328' Pressure Sensitive Aqueous Adhesive - Mounting Adhesives (PSA26-38328), Drytac brand


      Roll Width: 38"
      Roll Length: 328'
      Core Size: 3"
      Laminate Type: MediaTac Adhesive
      Filmic Carrier: 0.5 mil (13 micron) clear polyester
      Adhesive Bond: Permanent
      Adhesive Base: High
      Application Speed: 1' - 8' per minute
      Application Temp: Room Temperature - 120F (49 C)
      Release Liner: Moisture Stable Paper (60 lbs) (100 gsm)
      Film Finish: Clear Polyester
      Core Size: 3"
      Thickness: 0.5 mil
      Hot or Cold: Hot ßÃЊ“Á
    Part #: PSA26-38328

    $489.09

  2. Drytac MediaTac 38" x 164' Pressure Sensitive Aqueous Adhesive - Mounting Adhesives (PSA26-38164), Drytac brand


      Roll Width: 38"
      Roll Length: 164'
      Core Size: 3"
      Laminate Type: MediaTac Adhesive
      Filmic Carrier: 0.5 mil (13 micron) clear polyester
      Adhesive Bond: Permanent
      Adhesive Base: High
      Application Speed: 1' - 8' per minute
      Application Temp: Room Temperature - 120F (49 C)
      Release Liner: Moisture Stable Paper (60 lbs) (100 gsm)
      Film Finish: Clear Polyester
      Core Size: 3"
      Thickness: 0.5 mil
      Hot or Cold: Hot ßÃЊ“Á
    Part #: PSA26-38164

    $270.16

  3. Drytac MediaTac 25.5" x 164' Pressure Sensitive Aqueous Adhesive - Mounting Adhesives (PSA26-25164), Drytac brand


      Roll Width: 25.5"
      Roll Length: 164'
      Core Size: 3"
      Laminate Type: MediaTac Adhesive
      Filmic Carrier: 0.5 mil (13 micron) clear polyester
      Adhesive Bond: Permanent
      Adhesive Base: High
      Application Speed: 1' - 8' per minute
      Application Temp: Room Temperature - 120F (49 C)
      Release Liner: Moisture Stable Paper (60 lbs) (100 gsm)
      Film Finish: Clear Polyester
      Core Size: 3"
      Thickness: 0.5 mil
      Hot or Cold: Hot ßÃЊ“Á
    Part #: PSA26-25164

    $183.55

  4. Drytac MediaShield Heatset Satinex UV 3mil 51" x 328' Overlaminate (SX51328), Drytac brand

      MediaShield UV HeatSet (also referred to as a heat-assist) overlaminating films are often described as a hybrid between thermal and pressure sensitive films. MediaShield films bond well to inkjet output with high ink coverage - even on photo gloss paper and digital photo laser output (Lambda / Lightjet). The image can be trimmed flush, or even die-cut without fear of delamination. Due to its quick setup / curing time, MediaShield laminated graphics can be handled or rolled immediately after processing. Unlike most heat-activated films, MediaShield overlaminating films are protected by a release liner because the adhesive on these films is slightly tacky when cool. Tips For Applying MediaShield UV Heatset Films: MediaShield UV Heatset films are an excellent choice for laminating multiple images which have been mounted onto a single board or substrate because they minimize air entrapment around the edges of each image. To keep the film from stretching as it becomes soft and pliable when heated, apply only minimal brake tension to the unwind supply shaft and the release liner take-up. Mediashield and thermal overlaminating films can be combined when encapsulating a graphic. For example: MediaShield Emerytex on the front and MHL White Backing on the back of the image is an ideal combination for trade show applications. Adjust the take up shaft so that the release liner is removed just prior to entering the nip rollers. By reducing the adhesive's exposure to the air, there is less chance of picking up dust particles.
    Part #: SX51328

    $662.38

  5. Drytac MediaShield Heatset Satinex UV 3mil 51" x 164' Overlaminate (SX51164), Drytac brand

      MediaShield UV HeatSet (also referred to as a heat-assist) overlaminating films are often described as a hybrid between thermal and pressure sensitive films. MediaShield films bond well to inkjet output with high ink coverage - even on photo gloss paper and digital photo laser output (Lambda / Lightjet). The image can be trimmed flush, or even die-cut without fear of delamination. Due to its quick setup / curing time, MediaShield laminated graphics can be handled or rolled immediately after processing. Unlike most heat-activated films, MediaShield overlaminating films are protected by a release liner because the adhesive on these films is slightly tacky when cool. Tips For Applying MediaShield UV Heatset Films: MediaShield UV Heatset films are an excellent choice for laminating multiple images which have been mounted onto a single board or substrate because they minimize air entrapment around the edges of each image. To keep the film from stretching as it becomes soft and pliable when heated, apply only minimal brake tension to the unwind supply shaft and the release liner take-up. Mediashield and thermal overlaminating films can be combined when encapsulating a graphic. For example: MediaShield Emerytex on the front and MHL White Backing on the back of the image is an ideal combination for trade show applications. Adjust the take up shaft so that the release liner is removed just prior to entering the nip rollers. By reducing the adhesive's exposure to the air, there is less chance of picking up dust particles.
    Part #: SX51164

    $376.87

  6. Drytac MediaShield Heatset Satinex UV 3mil 38" x 328' Overlaminate (SX38328), Drytac brand

      MediaShield UV HeatSet (also referred to as a heat-assist) overlaminating films are often described as a hybrid between thermal and pressure sensitive films. MediaShield films bond well to inkjet output with high ink coverage - even on photo gloss paper and digital photo laser output (Lambda / Lightjet). The image can be trimmed flush, or even die-cut without fear of delamination. Due to its quick setup / curing time, MediaShield laminated graphics can be handled or rolled immediately after processing. Unlike most heat-activated films, MediaShield overlaminating films are protected by a release liner because the adhesive on these films is slightly tacky when cool. Tips For Applying MediaShield UV Heatset Films: MediaShield UV Heatset films are an excellent choice for laminating multiple images which have been mounted onto a single board or substrate because they minimize air entrapment around the edges of each image. To keep the film from stretching as it becomes soft and pliable when heated, apply only minimal brake tension to the unwind supply shaft and the release liner take-up. Mediashield and thermal overlaminating films can be combined when encapsulating a graphic. For example: MediaShield Emerytex on the front and MHL White Backing on the back of the image is an ideal combination for trade show applications. Adjust the take up shaft so that the release liner is removed just prior to entering the nip rollers. By reducing the adhesive's exposure to the air, there is less chance of picking up dust particles.
    Part #: SX38328

    $596.26

  7. Drytac MediaShield Heatset Satinex UV 3mil 38" x 164' Overlaminate (SX38164), Drytac brand

      MediaShield UV HeatSet (also referred to as a heat-assist) overlaminating films are often described as a hybrid between thermal and pressure sensitive films. MediaShield films bond well to inkjet output with high ink coverage - even on photo gloss paper and digital photo laser output (Lambda / Lightjet). The image can be trimmed flush, or even die-cut without fear of delamination. Due to its quick setup / curing time, MediaShield laminated graphics can be handled or rolled immediately after processing. Unlike most heat-activated films, MediaShield overlaminating films are protected by a release liner because the adhesive on these films is slightly tacky when cool. Tips For Applying MediaShield UV Heatset Films: MediaShield UV Heatset films are an excellent choice for laminating multiple images which have been mounted onto a single board or substrate because they minimize air entrapment around the edges of each image. To keep the film from stretching as it becomes soft and pliable when heated, apply only minimal brake tension to the unwind supply shaft and the release liner take-up. Mediashield and thermal overlaminating films can be combined when encapsulating a graphic. For example: MediaShield Emerytex on the front and MHL White Backing on the back of the image is an ideal combination for trade show applications. Adjust the take up shaft so that the release liner is removed just prior to entering the nip rollers. By reducing the adhesive's exposure to the air, there is less chance of picking up dust particles.
    Part #: SX38164

    $346.05

  8. Drytac MediaShield Heatset Mattex UV 3mil 51" x 328' Overlaminate (MX51328), Drytac brand

      MediaShield UV HeatSet (also referred to as a heat-assist) overlaminating films are often described as a hybrid between thermal and pressure sensitive films. MediaShield films bond well to inkjet output with high ink coverage - even on photo gloss paper and digital photo laser output (Lambda / Lightjet). The image can be trimmed flush, or even die-cut without fear of delamination. Due to its quick setup / curing time, MediaShield laminated graphics can be handled or rolled immediately after processing. Unlike most heat-activated films, MediaShield overlaminating films are protected by a release liner because the adhesive on these films is slightly tacky when cool. Tips For Applying MediaShield UV Heatset Films: MediaShield UV Heatset films are an excellent choice for laminating multiple images which have been mounted onto a single board or substrate because they minimize air entrapment around the edges of each image. To keep the film from stretching as it becomes soft and pliable when heated, apply only minimal brake tension to the unwind supply shaft and the release liner take-up. Mediashield and thermal overlaminating films can be combined when encapsulating a graphic. For example: MediaShield Emerytex on the front and MHL White Backing on the back of the image is an ideal combination for trade show applications. Adjust the take up shaft so that the release liner is removed just prior to entering the nip rollers. By reducing the adhesive's exposure to the air, there is less chance of picking up dust particles.
    Part #: MX51328

    $685.20

  9. Drytac MediaShield Heatset Mattex UV 3mil 38" x 328' Overlaminate (MX38328), Drytac brand

      MediaShield UV HeatSet (also referred to as a heat-assist) overlaminating films are often described as a hybrid between thermal and pressure sensitive films. MediaShield films bond well to inkjet output with high ink coverage - even on photo gloss paper and digital photo laser output (Lambda / Lightjet). The image can be trimmed flush, or even die-cut without fear of delamination. Due to its quick setup / curing time, MediaShield laminated graphics can be handled or rolled immediately after processing. Unlike most heat-activated films, MediaShield overlaminating films are protected by a release liner because the adhesive on these films is slightly tacky when cool. Tips For Applying MediaShield UV Heatset Films: MediaShield UV Heatset films are an excellent choice for laminating multiple images which have been mounted onto a single board or substrate because they minimize air entrapment around the edges of each image. To keep the film from stretching as it becomes soft and pliable when heated, apply only minimal brake tension to the unwind supply shaft and the release liner take-up. Mediashield and thermal overlaminating films can be combined when encapsulating a graphic. For example: MediaShield Emerytex on the front and MHL White Backing on the back of the image is an ideal combination for trade show applications. Adjust the take up shaft so that the release liner is removed just prior to entering the nip rollers. By reducing the adhesive's exposure to the air, there is less chance of picking up dust particles.
    Part #: MX38328

    $578.73

  10. Drytac MediaShield Heatset Mattex UV 3mil 38" x 164' Overlaminate (MX38164), Drytac brand

      MediaShield UV HeatSet (also referred to as a heat-assist) overlaminating films are often described as a hybrid between thermal and pressure sensitive films. MediaShield films bond well to inkjet output with high ink coverage - even on photo gloss paper and digital photo laser output (Lambda / Lightjet). The image can be trimmed flush, or even die-cut without fear of delamination. Due to its quick setup / curing time, MediaShield laminated graphics can be handled or rolled immediately after processing. Unlike most heat-activated films, MediaShield overlaminating films are protected by a release liner because the adhesive on these films is slightly tacky when cool. Tips For Applying MediaShield UV Heatset Films: MediaShield UV Heatset films are an excellent choice for laminating multiple images which have been mounted onto a single board or substrate because they minimize air entrapment around the edges of each image. To keep the film from stretching as it becomes soft and pliable when heated, apply only minimal brake tension to the unwind supply shaft and the release liner take-up. Mediashield and thermal overlaminating films can be combined when encapsulating a graphic. For example: MediaShield Emerytex on the front and MHL White Backing on the back of the image is an ideal combination for trade show applications. Adjust the take up shaft so that the release liner is removed just prior to entering the nip rollers. By reducing the adhesive's exposure to the air, there is less chance of picking up dust particles.
    Part #: MX38164

    $312.55

  11. Drytac MediaShield Heatset Matte UV 4mil 51" x 328' Overlaminate (MT51328), Drytac brand

      MediaShield UV HeatSet (also referred to as a heat-assist) overlaminating films are often described as a hybrid between thermal and pressure sensitive films. MediaShield films bond well to inkjet output with high ink coverage - even on photo gloss paper and digital photo laser output (Lambda / Lightjet). The image can be trimmed flush, or even die-cut without fear of delamination. Due to its quick setup / curing time, MediaShield laminated graphics can be handled or rolled immediately after processing. Unlike most heat-activated films, MediaShield overlaminating films are protected by a release liner because the adhesive on these films is slightly tacky when cool. Tips For Applying MediaShield UV Heatset Films: MediaShield UV Heatset films are an excellent choice for laminating multiple images which have been mounted onto a single board or substrate because they minimize air entrapment around the edges of each image. To keep the film from stretching as it becomes soft and pliable when heated, apply only minimal brake tension to the unwind supply shaft and the release liner take-up. Mediashield and thermal overlaminating films can be combined when encapsulating a graphic. For example: MediaShield Emerytex on the front and MHL White Backing on the back of the image is an ideal combination for trade show applications. Adjust the take up shaft so that the release liner is removed just prior to entering the nip rollers. By reducing the adhesive's exposure to the air, there is less chance of picking up dust particles.
    Part #: MT51328

    $874.61

  12. Drytac MediaShield Heatset Matte UV 4mil 41" x 328' Overlaminate (MT41328), Drytac brand

      MediaShield UV HeatSet (also referred to as a heat-assist) overlaminating films are often described as a hybrid between thermal and pressure sensitive films. MediaShield films bond well to inkjet output with high ink coverage - even on photo gloss paper and digital photo laser output (Lambda / Lightjet). The image can be trimmed flush, or even die-cut without fear of delamination. Due to its quick setup / curing time, MediaShield laminated graphics can be handled or rolled immediately after processing. Unlike most heat-activated films, MediaShield overlaminating films are protected by a release liner because the adhesive on these films is slightly tacky when cool. Tips For Applying MediaShield UV Heatset Films: MediaShield UV Heatset films are an excellent choice for laminating multiple images which have been mounted onto a single board or substrate because they minimize air entrapment around the edges of each image. To keep the film from stretching as it becomes soft and pliable when heated, apply only minimal brake tension to the unwind supply shaft and the release liner take-up. Mediashield and thermal overlaminating films can be combined when encapsulating a graphic. For example: MediaShield Emerytex on the front and MHL White Backing on the back of the image is an ideal combination for trade show applications. Adjust the take up shaft so that the release liner is removed just prior to entering the nip rollers. By reducing the adhesive's exposure to the air, there is less chance of picking up dust particles.
    Part #: MT41328

    $733.64

  13. Drytac MediaShield Heatset Matte UV 4mil 25.5" x 328' Overlaminate (MT25328), Drytac brand

      MediaShield UV HeatSet (also referred to as a heat-assist) overlaminating films are often described as a hybrid between thermal and pressure sensitive films. MediaShield films bond well to inkjet output with high ink coverage - even on photo gloss paper and digital photo laser output (Lambda / Lightjet). The image can be trimmed flush, or even die-cut without fear of delamination. Due to its quick setup / curing time, MediaShield laminated graphics can be handled or rolled immediately after processing. Unlike most heat-activated films, MediaShield overlaminating films are protected by a release liner because the adhesive on these films is slightly tacky when cool. Tips For Applying MediaShield UV Heatset Films: MediaShield UV Heatset films are an excellent choice for laminating multiple images which have been mounted onto a single board or substrate because they minimize air entrapment around the edges of each image. To keep the film from stretching as it becomes soft and pliable when heated, apply only minimal brake tension to the unwind supply shaft and the release liner take-up. Mediashield and thermal overlaminating films can be combined when encapsulating a graphic. For example: MediaShield Emerytex on the front and MHL White Backing on the back of the image is an ideal combination for trade show applications. Adjust the take up shaft so that the release liner is removed just prior to entering the nip rollers. By reducing the adhesive's exposure to the air, there is less chance of picking up dust particles.
    Part #: MT25328

    $469.50

  14. Drytac MediaShield Heatset Emerytex UV 5mil 51" x 328' Overlaminate (ET51328), Drytac brand

      MediaShield UV HeatSet (also referred to as a heat-assist) overlaminating films are often described as a hybrid between thermal and pressure sensitive films. MediaShield films bond well to inkjet output with high ink coverage - even on photo gloss paper and digital photo laser output (Lambda / Lightjet). The image can be trimmed flush, or even die-cut without fear of delamination. Due to its quick setup / curing time, MediaShield laminated graphics can be handled or rolled immediately after processing. Unlike most heat-activated films, MediaShield overlaminating films are protected by a release liner because the adhesive on these films is slightly tacky when cool. Tips For Applying MediaShield UV Heatset Films: MediaShield UV Heatset films are an excellent choice for laminating multiple images which have been mounted onto a single board or substrate because they minimize air entrapment around the edges of each image. To keep the film from stretching as it becomes soft and pliable when heated, apply only minimal brake tension to the unwind supply shaft and the release liner take-up. Mediashield and thermal overlaminating films can be combined when encapsulating a graphic. For example: MediaShield Emerytex on the front and MHL White Backing on the back of the image is an ideal combination for trade show applications. Adjust the take up shaft so that the release liner is removed just prior to entering the nip rollers. By reducing the adhesive's exposure to the air, there is less chance of picking up dust particles.
    Part #: ET51328

    $875.70

  15. Drytac MediaShield Heatset Emerytex UV 5mil 38" x 328' Overlaminate (ET38328), Drytac brand

      MediaShield UV HeatSet (also referred to as a heat-assist) overlaminating films are often described as a hybrid between thermal and pressure sensitive films. MediaShield films bond well to inkjet output with high ink coverage - even on photo gloss paper and digital photo laser output (Lambda / Lightjet). The image can be trimmed flush, or even die-cut without fear of delamination. Due to its quick setup / curing time, MediaShield laminated graphics can be handled or rolled immediately after processing. Unlike most heat-activated films, MediaShield overlaminating films are protected by a release liner because the adhesive on these films is slightly tacky when cool. Tips For Applying MediaShield UV Heatset Films: MediaShield UV Heatset films are an excellent choice for laminating multiple images which have been mounted onto a single board or substrate because they minimize air entrapment around the edges of each image. To keep the film from stretching as it becomes soft and pliable when heated, apply only minimal brake tension to the unwind supply shaft and the release liner take-up. Mediashield and thermal overlaminating films can be combined when encapsulating a graphic. For example: MediaShield Emerytex on the front and MHL White Backing on the back of the image is an ideal combination for trade show applications. Adjust the take up shaft so that the release liner is removed just prior to entering the nip rollers. By reducing the adhesive's exposure to the air, there is less chance of picking up dust particles.
    Part #: ET38328

    $732.37

  16. Drytac MediaShield Heatset Emerytex UV 5mil 38" x 164' Overlaminate (ET38164), Drytac brand

      MediaShield UV HeatSet (also referred to as a heat-assist) overlaminating films are often described as a hybrid between thermal and pressure sensitive films. MediaShield films bond well to inkjet output with high ink coverage - even on photo gloss paper and digital photo laser output (Lambda / Lightjet). The image can be trimmed flush, or even die-cut without fear of delamination. Due to its quick setup / curing time, MediaShield laminated graphics can be handled or rolled immediately after processing. Unlike most heat-activated films, MediaShield overlaminating films are protected by a release liner because the adhesive on these films is slightly tacky when cool. Tips For Applying MediaShield UV Heatset Films: MediaShield UV Heatset films are an excellent choice for laminating multiple images which have been mounted onto a single board or substrate because they minimize air entrapment around the edges of each image. To keep the film from stretching as it becomes soft and pliable when heated, apply only minimal brake tension to the unwind supply shaft and the release liner take-up. Mediashield and thermal overlaminating films can be combined when encapsulating a graphic. For example: MediaShield Emerytex on the front and MHL White Backing on the back of the image is an ideal combination for trade show applications. Adjust the take up shaft so that the release liner is removed just prior to entering the nip rollers. By reducing the adhesive's exposure to the air, there is less chance of picking up dust particles.
    Part #: ET38164

    $403.77

  17. Drytac MediaShield Deep Textured Canvastex UV 10mil 51" x 50' (CX51050), Drytac brand

      MediaShield UV HeatSet (also referred to as a heat-assist) overlaminating films are often described as a hybrid between thermal and pressure sensitive films. MediaShield films bond well to inkjet output with high ink coverage - even on photo gloss paper and digital photo laser output (Lambda / Lightjet). The image can be trimmed flush, or even die-cut without fear of delamination. Due to its quick setup / curing time, MediaShield laminated graphics can be handled or rolled immediately after processing. Unlike most heat-activated films, MediaShield overlaminating films are protected by a release liner because the adhesive on these films is slightly tacky when cool. Tips For Applying MediaShield UV Heatset Films: MediaShield UV Heatset films are an excellent choice for laminating multiple images which have been mounted onto a single board or substrate because they minimize air entrapment around the edges of each image. To keep the film from stretching as it becomes soft and pliable when heated, apply only minimal brake tension to the unwind supply shaft and the release liner take-up. Mediashield and thermal overlaminating films can be combined when encapsulating a graphic. For example: MediaShield Emerytex on the front and MHL White Backing on the back of the image is an ideal combination for trade show applications. Adjust the take up shaft so that the release liner is removed just prior to entering the nip rollers. By reducing the adhesive's exposure to the air, there is less chance of picking up dust particles.
    Part #: CX51050

    $285.85

  18. Drytac MediaShield Deep Textured Canvastex UV 10mil 51" x 150' (CX51150), Drytac brand

      MediaShield UV HeatSet (also referred to as a heat-assist) overlaminating films are often described as a hybrid between thermal and pressure sensitive films. MediaShield films bond well to inkjet output with high ink coverage - even on photo gloss paper and digital photo laser output (Lambda / Lightjet). The image can be trimmed flush, or even die-cut without fear of delamination. Due to its quick setup / curing time, MediaShield laminated graphics can be handled or rolled immediately after processing. Unlike most heat-activated films, MediaShield overlaminating films are protected by a release liner because the adhesive on these films is slightly tacky when cool. Tips For Applying MediaShield UV Heatset Films: MediaShield UV Heatset films are an excellent choice for laminating multiple images which have been mounted onto a single board or substrate because they minimize air entrapment around the edges of each image. To keep the film from stretching as it becomes soft and pliable when heated, apply only minimal brake tension to the unwind supply shaft and the release liner take-up. Mediashield and thermal overlaminating films can be combined when encapsulating a graphic. For example: MediaShield Emerytex on the front and MHL White Backing on the back of the image is an ideal combination for trade show applications. Adjust the take up shaft so that the release liner is removed just prior to entering the nip rollers. By reducing the adhesive's exposure to the air, there is less chance of picking up dust particles.
    Part #: CX51150

    $770.63

  19. Drytac JetMounter JM26 Electric 26 Inch Pressure Sensitive Cold Mount Laminator - Roll Laminators (DTJM26), Drytac brand


      Max Laminating Width: 26.25 inches (667mm)
      Width: 33.25 inches (845mm)
      Depth: 12.2 inches (310mm)
      Height: 12.3 inches (312.5mm)
      Weight: 53 lbs (24 kg)
      Roller Diameter: 2.5 inches (63.5mm)
      Max Nip Opening: 0.75 inches (19mm)
      Power: 115 VAC 50/60 Hz 50w
      Speed Range: 2.5 - 18 fpm (76 - 305cm / minute)
      Warranty: 1 Year Manufacturer
      Speed Range: 2.5 - 18 fpm (76 - 305cm / minute)
      Max Laminate Width: 26.25"
      Max Film Thickness: 10 mil
      Hot or Cold: Cold ßÃЊ“Á
    Part #: DTJM26

    $994.00

  20. Drytac JetMounter JM18 Electric 18 Inch Pressure Sensitive Cold Mount Laminator - Roll Laminators (DTJM18), Drytac brand


      Max Laminating Width: 18.25 inches (464mm)
      Width: 25.5 inches (648mm)
      Depth: 11.75 inches (299mm)
      Height: 13 inches (330mm)
      Weight: 51 lbs (23 kg)
      Roller Diameter: 2.5 inches (63.5mm)
      Max Nip Opening: 0.75 inches (19mm)
      Warranty: 1 Year Manufacturer Warranty
      Power: 115 VAC 50/60 Hz 50w
      Speed Range: 2.5 - 18 fpm (76 - 305cm / minute)
      Speed Range: 2.5 - 18 fpm (76 - 305cm / minute)
      Max Laminate Width: 18.25"
      Laminating Thickness: 3/4"
      Hot or Cold: Cold ßÃЊ“Á
    Part #: DTJM18

    $780.95

  21. Drytac JetMounter Electric 34 Inch Pressure Sensitive Cold Mount Laminator - Roll Laminators (JM34), Drytac brand


      Max Laminating Width: 34.25" (86.9 cm)
      Max Board Thickness: .75" (1.9 cm)
      Unpacked Weight: 70.5 lbs (32 kg)
      Width: 41.33" (105 cm)
      Depth: 11.8" (30 cm)
      Height: 13. 38" (34 cm)
      Speed Range: 2.5-18 fpm (0.76.-5.5 mpm)
      Power: 115 VAC or 230 VAC 50/60 Hz
      Part Number: JM34
      Max Laminate Width: 34.25"
      Laminating Speed: 18' per Minute
      Max Film Thickness: 10 mil
      Hot or Cold: Cold ßÃЊ“Á
    Part #: JM34

    $1498.95

  22. Drytac Interlam EcoTex 6.6mil 51" x 328' PS Overlaminate - Pressure Sensitive (IET51328), Drytac brand


      Film Width: 51"
      Film Length: 328'
      Film Thickness: 6.6mil
      Core Size: 3"
      Finish: EcoTex (Pebble Textured)
      Base Film: 5.6mil polypropylene
      Adhesive: 1.0mil aqueous acrylic
      Initial Tack: High
      Application Speed: 1' - 6' per minute
      Application Temperature: Room Temperature - 120 F
      Release Liner: Moisture Stable Paper (70gsm)
      Film Finish: Matte
      Core Size: 3"
      Film Thickness: 6.6mil
      Hot or Cold: Hot ßÃЊ“Á
    Part #: IET51328

    $650.33

  23. Drytac Ferro Metal Paper 36" x 82' Magnet Receptive Material (DFE3682), Drytac brand


      Base Product: 2.0mil (50micron) steel
      Adhesive: None
      Coating: 4.0mil (100 micron) white paper on each side
      Initial Tack: None
      Release Liner: None
      Film Finish: Magnetic Sheet
      Core Size: 3"
      Thickness: 4 mil
      Hot or Cold: Hot ßÃЊ“Á
    Part #: DFE3682

    $734.93

  24. Drytac Ferro Adhesive Coated 36" x 82' Magnet Receptive Metal Paper (DFA36082), Drytac brand


      Base Product: 2.0mil (50micron) steel
      Adhesive: 1.0mil (25 micron) solvent/rubber hybrid acrylic
      Coating: 4.0mil (100 micron) white paper on one side
      Initial Tack: Very High
      Release Liner: Paper
      Film Finish: Magnetic Sheet
      Core Size: 3"
      Thickness: 4 mil
      Hot or Cold: Hot ßÃЊ“Á
    Part #: DFA36082

    $1041.71

  25. Drytac FaceMount 72" x 150' Optically Clear Mounting Adhesive (PSF72150), Drytac brand


      Recommended for second surface mounting (commonly referred to as face mounting) of images to clear substrates, such as PetG, Plexiglas, acrylic, polycarbonate, and glass.
      Ideal for lenticular imaging applications, backlit display transparencies, touch screen displays, and high quality photographic and inkjet printed images.
      Suitable for indoor and short-term outdoor use.
      Film Finish: Clear Polyester
      Core Size: 3"
      Thickness: 1 mil
      Hot or Cold: Cold ßÃЊ“Á
    Part #: PSF72150

    $1299.34

  26. Drytac FaceMount 60.2" x 150' Optically Clear Mounting Adhesive (PSF61150), Drytac brand


      Recommended for second surface mounting (commonly referred to as face mounting) of images to clear substrates, such as PetG, Plexiglas, acrylic, polycarbonate, and glass.
      Ideal for lenticular imaging applications, backlit display transparencies, touch screen displays, and high quality photographic and inkjet printed images.
      Suitable for indoor and short-term outdoor use.
      Film Finish: Clear Polyester
      Core Size: 3"
      Thickness: 1 mil
      Hot or Cold: Cold ßÃЊ“Á
    Part #: PSF61150

    $1084.80

  27. Drytac FaceMount 51" x 150' Optically Clear Mounting Adhesive (PSF51150), Drytac brand


      Recommended for second surface mounting (commonly referred to as face mounting) of images to clear substrates, such as PetG, Plexiglas, acrylic, polycarbonate, and glass.
      Ideal for lenticular imaging applications, backlit display transparencies, touch screen displays, and high quality photographic and inkjet printed images.
      Suitable for indoor and short-term outdoor use.
      Film Finish: Clear Polyester
      Core Size: 3"
      Thickness: 1 mil
      Hot or Cold: Cold ßÃЊ“Á
    Part #: PSF51150

    $837.76

  28. Drytac FaceMount 38" x 150' Optically Clear Mounting Adhesive (PSF38150), Drytac brand


      Recommended for second surface mounting (commonly referred to as face mounting) of images to clear substrates, such as PetG, Plexiglas, acrylic, polycarbonate, and glass.
      Ideal for lenticular imaging applications, backlit display transparencies, touch screen displays, and high quality photographic and inkjet printed images.
      Suitable for indoor and short-term outdoor use.
      Film Finish: Clear Polyester
      Core Size: 3"
      Thickness: 1 mil
      Hot or Cold: Cold ßÃЊ“Á
    Part #: PSF38150

    $613.10

  29. Drytac FaceMount 25" x 150' Optically Clear Mounting Adhesive (PSF25150), Drytac brand


      Recommended for second surface mounting (commonly referred to as face mounting) of images to clear substrates, such as PetG, Plexiglas, acrylic, polycarbonate, and glass.
      Ideal for lenticular imaging applications, backlit display transparencies, touch screen displays, and high quality photographic and inkjet printed images.
      Suitable for indoor and short-term outdoor use.
      Film Finish: Clear Polyester
      Core Size: 3"
      Thickness: 1 mil
      Hot or Cold: Cold ßÃЊ“Á
    Part #: PSF25150

    $39.99

  30. Drytac Dust Removal System Pads - 5 Pads (50 sheets/pad) - Laminating Accessories (PCRPAD-5), Drytac brand


      Qty: 5 Pads (50 Sheets/Pad)
      Warning: Is not suitable with Epson Printers
      Part Number: PCRPAD-5
      Roller is not included
      Qty: 5 Pads (50 Sheets/Pad)
      Warning: Is not suitable with Epson Printers
      Part Number: PCRPAD-5
      Roller is not included ßÃЊ“Á
    Part #: PCRPAD-5

    $240.00

Items 1-15 of 22

Display Type List Grid
Page:   1   60   70   80   90   100   110   120   130   140   150   151   152   153   154   155   156   157   158   159   160   161   162   163   164   165   166   167   168   169   170   171   172   173   174   175   176   177   178   179   180   190   200   210   220   230   240   250   260   300   304