Product listing: Rosback 13/32" Drill Bit for Rosco 370 and 371 Paper Drills (ROSBACS1573) to Rhin-O-Tuff Velobind 12-Hole Die Set For Tornado Autopunch EX (T4512)
-
Rosback 13/32" Drill Bit for Rosco 370 and 371 Paper Drills (ROSBACS1573), Rosback brand
- Made of tempered steel to maintain sharpness and prevent clogging
- A sharper bit, through more drilling cycles.
- Greater productivity with fewer changeovers.
- Ships inside the re-closeable plastic tube for protection.
- Made of tempered steel to maintain sharpness and prevent clogging
Part #: ROSBACS1573 -
Rosback 11/32" Drill Bit for Rosco 370 and 371 Paper Drills (ROSBACS1302), Rosback brand
- Made of tempered steel to maintain sharpness and prevent clogging
- A sharper bit, through more drilling cycles.
- Greater productivity with fewer changeovers.
- Ships inside the re-closeable plastic tube for protection.
- Made of tempered steel to maintain sharpness and prevent clogging
Part #: ROSBACS1302 -
Rosback 1/8" Drill Bit for Rosco 370 and 371 Paper Drills (ROSBACS1309), Rosback brand
- Made of tempered steel to maintain sharpness and prevent clogging
- A sharper bit, through more drilling cycles.
- Greater productivity with fewer changeovers.
- Ships inside the re-closeable plastic tube for protection.
- Made of tempered steel to maintain sharpness and prevent clogging
Part #: ROSBACS1309 -
Rosback 1/4" Drill Bit for Rosco 370 and 371 Paper Drills (ROSBACS1268), Rosback brand
- Made of tempered steel to maintain sharpness and prevent clogging
- A sharper bit, through more drilling cycles.
- Greater productivity with fewer changeovers.
- Ships inside the re-closeable plastic tube for protection.
- Made of tempered steel to maintain sharpness and prevent clogging
Part #: ROSBACS1268 -
Rosback 1/2" Drill Bit for Rosco 370 and 371 Paper Drills (ROSBACS1575), Rosback brand
- Made of tempered steel to maintain sharpness and prevent clogging
- A sharper bit, through more drilling cycles.
- Greater productivity with fewer changeovers.
- Ships inside the re-closeable plastic tube for protection.
- Made of tempered steel to maintain sharpness and prevent clogging
Part #: ROSBACS1575 -
RollePro Vinyl Film Applicator Wheel (RPRO), RollePro brand
- Designed to roll over vinyl covered rivets and contours in seconds.
- Ergonomic design and specially formulated, heat resistant wheel.
- Brings speed and comfort to the once time-consuming application process.
- Eliminates the need to use a brush to seal rivets.
- May be used on a variety of surfaces such as brick and concrete, vehicles and smooth surfaces.
Part #: RPRO -
Rocket Red Astrobrights 24lb Unpunched Binding Paper - 500 Sheets (UPP24ABRR), MyBinding brand
- Paper Type : Astrobrights
- Paper Weight: 24lb Bond (50# Text)
- Color: Rocket Red
- Paper Size: Choose Above
- Quantity: 1 Ream (500 Sheets)
Part #: UPP24ABRR -
Rocket Red Astrobrights 24lb Punched Binding Paper - 500 Sheets (PPP24ABRR), MyBinding brand
- Paper Weight: 24lb Bond (60# Text)
- Color: Rocket Red
- Paper Type: Astrobrights
- Punching Style: Choose Above
- Paper Size: Choose Above
Part #: PPP24ABRR -
RN Vertical Badge Buddies (Blue Bar/White Text) - 25pk (1350-2134), MyBinding brand
- Card Material: Teslin
- Card Dimensions: 2-1/8"W x 4-1/2"H
- Bar Color: Blue
- Orientation: Vertical
- Card Thickness: 30 mils
Part #: 1350-2134 -
RN Horizontal Badge Buddies (Blue Bar/White Text) - 25pk (1350-2130), MyBinding brand
- Card Material: Teslin
- Card Dimensions: 3-3/8"W x 3-3/32"H
- Bar Color: Blue
- Orientation: Horizontal
- Card Thickness: 30 mils
Part #: 1350-2130 -
RN Badge Buddies (Blue Bar/White Text) - 25pk (1350-213RN), MyBinding brand
- Card Material: Teslin
- Card Dimensions: 3-3/8"W x 3-3/32"H or 2-1/8"W x 4-1/2"H
- Bar Color: Blue
- Orientation: Horizontal or Vertical
- Card Thickness: 30 mils
Part #: 1350-213RN -
Rivet Wheel for Fleet and Vehicle Wrap installation (RW), MyBinding brand
- Unique designed.
- Put air release holes into an entire strip of rivets.
- Makes big rig trailer install much faster and easier.
- Cuts 2.3 hours of install time per trailer application.
- Uniquely designed
Part #: RW -
Rivet Brush Applicator (RB), MyBinding brand
- Makes installing vinyl over rivets easier.
- Made of stiff bristle synthetic fiber
- Helps form flexible vinyl over the rivet surface.
- Makes installing vinyl over rivets easier.
- Made of stiff bristle synthetic fiber
Part #: RB -
Rigidwear Polycarbonate 2-Card Badge Holder - 50/PK (MYBP706NN2), MyBinding brand
- Type: Badge Holder
- Color: Clear
- Orientation: Vertical
- Size: 30 mil (750 mic)
- Quantity: 50 per Pack
Part #: MYBP706NN2 -
Rigid Vinyl Name Tag Holders with Crimp Pins - 100pk (MYRVNTHCP), MyBinding brand
- Type: Convention Name Tag Holders
- Color: Clear
- Card Size: 2-1/4" x 3-1/2" or 3" x 4"
- Connector: Nickel Plated Steel Crimp Pin
- Quantity: 100 Per Pack
Part #: MYRVNTHCP -
Rigid Plastic Horizontal 2-Card Dispensers with Slide Ejectors - 50pk (MYBP736T2), MyBinding brand
- These rugged dispensers feature two slide ejectors for easy card removal.
- Easy access to cards
- UV protection
- Slotted on the back for easy attachment to lanyard, badge reel or chain.
- Color: Clear
Part #: MYBP736T2 -
Rigid Plastic Heavy Duty Luggage Tag Holders - 100pk (MYRPHDLTH), MyBinding brand
- Type: Rigid Plastic Luggage Tag Holder
- Color: Black, Blue, Frost, Green, Red, White or Yellow
- Material: Rigid Colored Plastic
- Connector: Slot
- Size: 4-1/4" x 2-1/2" (108mm x 64mm)
Part #: MYRPHDLTH -
Ribbon Silk Screened Awareness Lanyards - 100pk (MYRSSAL), MyBinding brand
- Type: Awareness Lanyards
- Length: 36 Inches
- Color: Pink or Purple
- Imprint: Pink or Purple Ribbons
- Attachment: Nickel Plated Steel Swivel Hook
Part #: MYRSSAL -
Rhinestone Lanyard With Lobster Claw (MYRLLC), MyBinding brand
- Type: Standard Lanyards
- Width: 5/8" (16mm)
- Cord Length: 36" (915mm)
- Color: Black, Purple or Red
- Material: Rhinestone
Part #: MYRLLC -
Rhin-O-Tuff Wire Hanger for HD8000 (110066S), Rhin-O-Tuff brand
- Product Type: Wire Hanger
- Designed for: HD8000 Wire Closer
- Quantity: 1
- Product Number: 11290
- Works with the HD8000 Wire closer
Part #: 110066S -
Rhin-O-Tuff Wide Format Electric Coil Binding System (7500HC4), Rhin-O-Tuff brand
- Die with easy disengageable pins - Included
- Coil Inserter - Included
- Crimping Pliers ? Included
- Automatic and Manual Reverse feature to reduce jamming in the punch
- Punches up to 40 sheets of 20 lb paper
Part #: 7500HC4 -
Rhin-O-Tuff Wide Format Electric 2:1 Wire Binding System (7500HW2), Rhin-O-Tuff brand
- Die with easy disengageable pins - Included
- Inserter/Closer - Included
- Automatic and Manual Reverse feature to reduce jamming in the punch
- Punches up to 40 sheets of 20 lb paper
- Rate of 25 cycles per minute
Part #: 7500HW2 -
Rhin-O-Tuff Versa Switch for HD7700 Vertical (77890), Rhin-O-Tuff brand
- Product Type: Versa Switch
- Used for: HD7700 Vertical
- Part Number: 77890
- Product Type: Versa Switch
- Compatible with HD7700 Vertical
Part #: 77890 -
Rhin-O-Tuff Versa Switch for HD7700 Horizontal (77990), Rhin-O-Tuff brand
- Product Type: Versa Switch
- Used for: HD7700 Horizontal
- Part Number: 77990
- Product Type: Versa Switch
- Compatible with HD7700 Horizontal
Part #: 77990 -
Rhin-O-Tuff Versa Switch for HD7000 and HD6500 (UL Machines) (72180), Rhin-O-Tuff brand
- Product Type: Versa Switch
- Used for: HD7000 and HD6500 (UL Machines)
- Part Number: 72180
- Product Type: Versa Switch
- Compatible with HD7000 and HD6500 (UL Machines)
Part #: 72180 -
Rhin-O-Tuff Velobind Die Set For OD4012 (04100A), Rhin-O-Tuff brand
- Velobind Round Hole Die
- 1" Hole Spacing
- .125 Hole Diameter
- Rhin-O-Tuff Part Number: 04100A
- Velobind Round Hole Die
Part #: 04100A -
Rhin-O-Tuff Velobind Die Set For OD4000 and OD4800 (04100A1), Rhin-O-Tuff brand
- Velobind Round Hole Die
- 1" Hole Spacing
- .125 Hole Diameter
- Rhin-O-Tuff Part Number: 04100a
- Velobind Round Hole Die
Part #: 04100A1 -
Rhin-O-Tuff Velobind Die Set For HD7700 (79030), Rhin-O-Tuff brand
- Velobind Die
- 1" Hole Spacing
- .125 Hole Diameter
- Rhin-O-Tuff Part Number: 079030
- Velobind Die
Part #: 79030 -
Rhin-O-Tuff Velobind Die Set For HD6500 and HD7000 (903), Rhin-O-Tuff brand
- Velobind Round Hole Die
- 1 Inch Spacing
- .125 Hole Diameter
- Rhin-O-Tuff Part Number: 000903
- Velobind Round Hole Die
Part #: 903 -
Rhin-O-Tuff Velobind 12-Hole Die Set For Tornado Autopunch EX (T4512), Rhin-O-Tuff brand
- Recommended Paper Sizes: A4/12"
- Punching Pattern: Velobind, 12-Holes
- Pitch: 1.00" Pitch (Center-to-Center Hole Spacing)
- Hole Diameter: .125"
- Edge Margin: .125"
Part #: T4512