Product listing: Challenge Titan 230 High Speed Steel Replacement Blade - 42007 (JH-31930HSS) to Challenge 34-1/2" 34" 35-1/2" Diamond Replacement Blade (JH-34100)

Page
View by: Title (A-Z)  |  Title (Z-A)  |  Price (High-to-Low)  |  Price (Low-to-High)  |  Popularity  |  Best Sellers  |  Category  |  Product Number
  1. Challenge Titan 230 High Speed Steel Replacement Blade - 42007 (JH-31930HSS), MyBinding brand

      Type of Blade: High Speed Steel Dimensions (L x W x T): 26.750inchx3.000inch x .375inch Holes/Slots: 5H
    Part #: JH-31930HSS

    $344.49

  2. Challenge Three Knife Trimmer Top Right Replacement Blade (JH-31201), MyBinding brand

      Compatible Models: Challenge Three Knife Trimmer Material: Standard Inlay Holes: 4 Length: 12inch With: 5inch Thickness: 0.5inch Notes: Top Right Part Number: JH-31201 , 31201 , KN31201
    Part #: JH-31201

    $169.59

  3. Challenge Three Knife Trimmer Top Left Replacement Blade (JH-31301), MyBinding brand

      Compatible Models: Challenge Three Knife Trimmer Material: Standard Inlay Holes: 4 Length: 12inch With: 5inch Thickness: 0.5inch Notes: Top Left Part Number: JH-31301 , 31301 , KN31301
    Part #: JH-31301

    $169.59

  4. Challenge Three Knife Trimmer Top Front Replacement Blade (JH-31401), MyBinding brand

      Compatible Models: Challenge Three Knife Trimmer Material: Standard Inlay Holes: 4 Length: 13inch With: 5inch Thickness: 0.5inch Notes: Top Front Part Number: JH-31401 , 31401 , KN31401
    Part #: JH-31401

    $196.09

  5. Challenge Spartan 185SA Replacement Blade - 63017 (JH-31660), MyBinding brand

      Type of Blade: Standard Inlay Dimensions (L x W x T): 22.500inchx2.630inch x .375inch Holes/Slots: 6H Hole Size: 5/16inch -8
    Part #: JH-31660

    $190.79

  6. Challenge Spartan 150 Replacement Blade (JH31460), MyBinding brand

      Compatible Models: Challenge Spartan 150 Material: Standard Inlay Holes: 6 Length: 18.25inch With: 1.625inch Thickness: 0.25inch Notes: Part Number: JH-31460 , 31460 , KN31460
    Part #: JH31460

    $164.29

  7. Challenge Spartan 150 HSS Replacement Blade (JH31460HSS), MyBinding brand

      Compatible Models: Challenge Spartan 150 Material: High Speed Steel Holes: 6 Length: 18.25inch With: 1.625inch Thickness: 0.25inch Notes: Part Number: JH-31460HSS , 31460HSS , KN31460HSS
    Part #: JH31460HSS

    $243.79

  8. Challenge Pak Rak Heavy Duty Paper Stock Truck - Equipment (CH-PAK-RAK), Challenge brand


      Holds 11" x 17"/28 x 43 cm Stock - Inward slant on each shelf keeps your stock tight to the corner for a square stack - even when moving between locations.
      12 shelf surface's to stack separate jobs. Another 4 shelves can be added.
      500 lb/227 kg Total Capacity
      Portable - Four 5" hard rubber industrial casters and two side handles make these units easy to control and easy to roll from place to place.
      Solid Construction - Shipped to you in one piece, the PAK-RAK is constructed of heavy gauge, welded steel.
      Includes: Four fixed base shelves and eight removable shelves
      Holds 11" x 17"/28 x 43 cm Stock - Inward slant on each shelf keeps your stock tight to the corner for a square stack - even when moving between locations.
      12 shelf surface's to stack separate jobs. Another 4 shelves can be added.
      500 lb/227 kg Total Capacity
      Portable - Four 5" hard rubber industrial casters and two side handles make these units easy to control and easy to roll from place to place. ßÃЊ“Á
    Part #: CH-PAK-RAK

    $995.00

  9. Challenge Paddy Wagon Heavy Duty Padding Press - Equipment (CH-PADDYWAGON), Challenge brand


      High Capacity: Holds up to 31" of paper for production padding environments
      Simple 1-2-3 Operation: Ease of operations turns padding service into a value-added profit center.
      Tilt & Load: With the double doors locked, tilt the PADDY WAGON back. The 30 Degrees table slant allows gravity to do all the work of aligning stock and keeping it square. Load up to 15,000 8 1/2" x 11" sheets of 20# bond - even more with smaller sheets.
      Clamp: After loading is complete, aligned stacks are clamped in just seconds. Place the clamping bar on top or your paper, slide the self-locking, quick-release clamps down to the bar and tighten the screws.
      Tilt & Pad: Tilt the PADDY WAGON back to the upright position, lift the doors to unlock and swing them open for complete access to your padding surface.
      Portable Heavy Duty Casters: Allow you to move the Paddy Wagon to your job and store the wagon when not in use
      Welded Tubular Steel Construction: Provides durability and longevitivity in even the most demanding production environments
      Products Working for You: The Paddy Wagon is just one in the line of Challenge products engineered to make your job easier.
      High Capacity: Holds up to 31" of paper for production padding environments
      Simple 1-2-3 Operation: Ease of operations turns padding service into a value-added profit center.
      Tilt & Load:With the double doors locked, tilt the PADDY WAGON back. The 30 Degrees table slant allows gravity to do all the work of aligning stock and keeping it square.
      Clamp:After loading is complete, aligned stacks are clamped in just seconds. Place the clamping bar on top or your paper, slide the self-locking, quick-release clamps down to the bar and tighten the screws. ßÃЊ“Á
    Part #: CH-PADDYWAGON

    $708.00

  10. Challenge Mini Padder Portable Padding Press - Equipment (CH-MINIPADDER), Challenge brand


      Portable, Compact & Economical
      Load up to 5" high and up to 11" x 17" sized sheets
      The Mini-Padder is just one in the line of Challenge products engineered to make your job easier.
      Maximum Lift Height 5" / 12.7 cm
      Maximum Lift Width: 17-1/2" / 44 cm
      Lift Depth: 4" to 11+" / 10 cm to 28+ cm
      Capacity: 1250 Sheets of 20lb paper ßÃЊ“Á
    Part #: CH-MINIPADDER

    $168.74

  11. Challenge iJog Paper Jogger with Air Assist - Equipment (CH-IJOGAIR), Challenge brand


      Robust, electro-mechanical jogging action
      Front-side loading
      Foot pedal control
      Adjustable air flow - dial from zero to 112 CFM
      Two jogging speeds
      Three operating modes - air off all the time, air on all the time, or air on for an adjustable length of time during the jogging action
      Rugged, heavy duty construction
      Front-side loading
      Foot pedal control
      Two jogging speeds
      Three operating modes - air off all the time, air on all the time, or air on for an adjustable length of time during the jogging action ßÃЊ“Á
    Part #: CH-IJOGAIR

    $1832.50

  12. Challenge Handy-Jog Paper Jogger with Standard Tray - Equipment (CH-HANDYJOGST), Challenge brand


      Front Side Loading
      Three Trays to Choose from - Standard (8.5" x 11"), Check Tray (9.5" x 12") and Large Tray (11" x 17")
      Up to 11" x 17" stock tray
      Powerful jogging action
      Quiet operation
      Maintenance free drive mechanism
      Optional "Instant On" footswitch
      UL Listed
      Front Side Loading
      Three Trays to Choose from - Standard (8.5" x 11"), Check Tray (9.5" x 12") and Large Tray (11" x 17")
      Up to 11" x 17" stock tray
      Powerful jogging action ßÃЊ“Á
    Part #: CH-HANDYJOGST

    $515.00

  13. Challenge Handy-Jog Paper Jogger with LargeTray - Equipment (CH-HANDYJOGXL), Challenge brand


      Front Side Loading
      Three Trays to Choose from - Standard (8.5" x 11"), Check Tray (9.5" x 12") and Large Tray (11" x 17")
      Up to 11" x 17" stock tray
      Powerful jogging action
      Quiet operation
      Maintenance free drive mechanism
      Optional "Instant On" footswitch
      UL Listed
      Front Side Loading
      Three Trays to Choose from - Standard (8.5" x 11"), Check Tray (9.5" x 12") and Large Tray (11" x 17")
      Up to 11" x 17" stock tray
      Powerful jogging action ßÃЊ“Á
    Part #: CH-HANDYJOGXL

    $540.00

  14. Challenge Handy-Jog Paper Jogger with Check Tray - Equipment (CH-HANDYJOGCH), Challenge brand


      Front Side Loading
      Three Trays to Choose from - Standard (8.5" x 11"), Check Tray (9.5" x 12") and Large Tray (11" x 17")
      Up to 11" x 17" stock tray
      Powerful jogging action
      Quiet operation
      Maintenance free drive mechanism
      Optional "Instant On" footswitch
      UL Listed
      Front Side Loading
      Three Trays to Choose from - Standard (8.5" x 11"), Check Tray (9.5" x 12") and Large Tray (11" x 17")
      Up to 11" x 17" stock tray
      Powerful jogging action ßÃЊ“Á
    Part #: CH-HANDYJOGCH

    $458.00

  15. Challenge Handy-Drill Single Spindle Paper Drill - Equipment (CH-HANDYDRILL), Challenge brand


      2-1/2" lift capacity in 4 different drill bit sizes (1/4", 5/16", 3/8", 1/2"). Machine can be converted to a 2" maximum lift capacity for a wider range of available hole sizes (1/8" to 1/2").
      Safe to operate - Spindle motor automatically turns on when the pull-down lever is moved and automatically switches off when the lever returns to the up position.
      Conveniently located chip collector cups - Located around the spindle, they include a sight gauge to signify when the cups are full and need to be emptied. The cups also serve as safety covers with interlock switches. When removed to change the drill bit or to empty the paper chips, power to the motor is locked out until the cups are replaced.
      Adjustable backgauge stops - The backgauge includes 4 adjustable stops for drilling multiple hole pattern jobs. Just flip the switch and move your pile to the next setting.
      Adjustable Margins: Thumb screws easily lock the backguage to the drill table. To adjust the margins, simply loosen the screws and line-up the gauge with the dual scales located on the drill table. Hole locations can be drilled up to 2.5" margin from the edge of the paper.
      Included : (1) 1/4"/6.4 mm & (1) 5/16"/7.9 mm 2-1/2" hollow drill bits, (2) 1-1/2"/38 mm wood drilling blocks, (1) trip backgauge, (1) manual & (1) tool kit
      2-1/2" lift capacity in 4 different drill bit sizes (1/4", 5/16", 3/8", 1/2"). Machine can be converted to a 2" maximum lift capacity for a wider range of available hole sizes (1/8" to 1/2").
      Safe to operate - Spindle motor automatically turns on when the pull-down lever is moved and automatically switches off when the lever returns to the up position.
      Conveniently located chip collector cups - Located around the spindle, they include a sight gauge to signify when the cups are full and need to be emptied. The cups also serve as safety covers with interlock switches.
      Adjustable backgauge stops - The backgauge includes 4 adjustable stops for drilling multiple hole pattern jobs. Just flip the switch and move your pile to the next setting. ßÃЊ“Á
    Part #: CH-HANDYDRILL

    $1445.00

  16. Challenge Handy Padder Portable Padding Press - Equipment (CH-HANDYPADDER), Challenge brand


      Portable/Compact & Economical: Put away your bricks, blocks, and boards. The Challenge Handy-Padder design provides a portable and compact table-top padding device for the right price. The convenient turn style base of the Handy-Padder allows the operator to load, clamp and pad from a single position.
      Stabilized Base: The Handy-Padder has an extended sheet metal stabilizer designed to eliminate tipping problems when loaded with stock.
      Simple 1-2-3 Operation: Ease of operations turns padding service into a value-added profit center.
      Lock & Load: Lock the removable plate in place. The 8 Degrees table slant allows gravity to do all the work of aligning stock and keeping it square. Load up to 8,000 8-1/2" x 11" sheets of 20# bond - even more with smaller sheets.
      Clamp: After loading is complete, aligned stacks are clamped in just seconds. Place the clamping bar on top of your paper, slide the self-locking, quick-release clamps down to the bar and tighten the screws.
      Turn & Pad: Turn the table around and remove the plate for complete access to your padding.
      Products Working for You: The Handy-Padder is just one in the line of Challenge products engineered to make your job easier.
      Portable/Compact & Economical: Put away your bricks, blocks, and boards. The Challenge Handy-Padder design provides a portable and compact table-top padding device for the right price.
      Stabilized Base: The Handy-Padder has an extended sheet metal stabilizer designed to eliminate tipping problems when loaded with stock.
      Simple 1-2-3 Operation: Ease of operations turns padding service into a value-added profit center.
      Lock & Load: Lock the removable plate in place. The 8 Degrees table slant allows gravity to do all the work of aligning stock and keeping it square. ßÃЊ“Á
    Part #: CH-HANDYPADDER

    $400.70

  17. Challenge Handy Cart Paper Stock Truck - Equipment (CH-HANDYCART), Challenge brand


      Mobility & Control: Four 5" hard rubber swivel casters and four handles make your Handy-Cart easy to control and easy to roll from place to place.
      Keeping Stock Square : Inward slant on each shelf keeps your stock tight to the corner for a square stack - even when moving between locations.
      Solid Construction - Shipped to you in one piece, the HANDY-CART is constructed of heavy gauge, welded steel.
      Products Working for You: The Handy-Cart is another great product value from Challenge! All of our products are engineered to make your job easier.
      Full-size lower shelf with a lip to prevent items from sliding off.
      Holds (4) piles of 11" x 17"/28 x 43 cm Stock up to 21" tall
      500 lb/227 kg Total Capacity
      Mobility & Control: Four 5" hard rubber swivel casters and four handles make your Handy-Cart easy to control and easy to roll from place to place.
      Keeping Stock Square: Inward slant on each shelf keeps your stock tight to the corner for a square stack - even when moving between locations.
      Solid Construction - Shipped to you in one piece, the HANDY-CART is constructed of heavy gauge, welded steel.
      Products Working for You: The Handy-Cart is another great product value from Challenge! All of our products are engineered to make your job easier. ßÃЊ“Á
    Part #: CH-HANDYCART

    $563.50

  18. Challenge CMT 330 3-Knife High Speed Steel Replacement Blade (JH-31470HSS), MyBinding brand

      Type of Blade: High Speed Steel Dimensions (L x W x T): 14.500inchx2.750inch x .375inch Holes/Slots: 6H Hole Size: 3/8inch -16
    Part #: JH-31470HSS

    $325.39

  19. Challenge CMT 130 High Speed Steel Replacement Blade (JH-31480HSS), MyBinding brand

      Type of Blade: High Speed Steel Dimensions (L x W x T): 17.500inchx2.750inch x .375inch Holes/Slots: 7H Hole Size: 3/8inch -16
    Part #: JH-31480HSS

    $296.79

  20. Challenge 42TCM Replacement Blade (JH-34560), MyBinding brand

      Compatible Models: Challenge 42TCM Material: Standard Inlay Holes: 21 Length: 49.5inch With: 5inch Thickness: 0.431inch Notes: Part Number: JH-34560 , 34560 , KN34560
    Part #: JH-34560

    $503.49

  21. Challenge 42TCM High Speed Steel Replacement Blade (JH-34560HSS), MyBinding brand

      Compatible Models: Challenge 42TCM Material: High Speed Steel Holes: 21 Length: 49.5inch With: 5inch Thickness: 0.431inch Notes: Part Number: JH-34560HSS , 34560HSS , KN34560HSS
    Part #: JH-34560HSS

    $980.49

  22. Challenge 420 Replacement Blade (JH-34550), MyBinding brand

      Compatible Models: Challenge 420 Material: Standard Inlay Holes: 21 Length: 49inch With: 5inch Thickness: 0.431inch Notes: Part Number: JH-34550 , 34550 , KN34550
    Part #: JH-34550

    $445.19

  23. Challenge 37TCM Replacement Blade (JH-34510), MyBinding brand

      Compatible Models: Challenge 37TCM Material: Standard Inlay Holes: 18 Length: 44.5inch With: 5inch Thickness: 0.431inch Notes: Part Number: JH-34510 , 34510 , KN34510
    Part #: JH-34510

    $381.59

  24. Challenge 37TCM High Speed Steel Replacement Blade (JH-34510HSS), MyBinding brand

      Compatible Models: Challenge 37TCM Material: High Speed Steel Holes: 18 Length: 44.5inch With: 5inch Thickness: 0.431inch Notes: Part Number: JH-34510HSS , 34510HSS , KN34510HSS
    Part #: JH-34510HSS

    $794.99

  25. Challenge 370XG Replacement Blade (JH-34450), MyBinding brand

      Compatible Models: Challenge 370XG Material: Standard Inlay Holes: 18 Length: 43.25inch With: 4.5inch Thickness: 0.375inch Notes: Part Number: JH-34450 , 34450 , KN34450
    Part #: JH-34450

    $402.79

  26. Challenge 370XG High Speed Steel Replacement Blade - 49055 (JH-34450HSS), MyBinding brand

      Type of Blade: High Speed Steel Dimensions (L x W x T): 43.250inchx4.500inch x .375inch Holes/Slots: 18H Hole Size: 3/8inch -16
    Part #: JH-34450HSS

    $826.79

  27. Challenge 370 Replacement Blade (JH-34500), MyBinding brand

      Compatible Models: Challenge 370 Material: Standard Inlay Holes: 18 Length: 44inch With: 5inch Thickness: 0.438inch Notes: 37inch Part Number: JH-34500 , 34500 , KN34500
    Part #: JH-34500

    $381.59

  28. Challenge 36-1/2" Replacement Blade (JH-34400), MyBinding brand

      Compatible Models: Challenge 36 1/2inch Material: Standard Inlay Holes: 12 Length: 42inch With: 4inch Thickness: 0.438inch Notes: Diamond Part Number: JH-34400 , 34400 , KN34400
    Part #: JH-34400

    $370.99

  29. Challenge 34-1/2" Diamond Replacement Blade (JH-33950), MyBinding brand

      Compatible Models: Challenge 34 1/2inch Material: Standard Inlay Holes: 14 Length: 41inch With: 4inch Thickness: 0.438inch Notes: Diamond Part Number: JH-33950 , 33950 , KN33950
    Part #: JH-33950

    $349.79

  30. Challenge 34-1/2" 34" 35-1/2" Diamond Replacement Blade (JH-34100), MyBinding brand

      Compatible Models: Challenge 34 1/2inch , 34inch , 35 1/2inch Material: Standard Inlay Holes: 14 Length: 41inch With: 4.5inch Thickness: 0.438inch Notes: Diamond Part Number: JH-34100 , 34100 , KN34100
    Part #: JH-34100

    $360.39

Items 1-15 of 22

Display Type List Grid
Page:   1   70   80   90   100   110   120   130   140   150   162   163   164   165   166   167   168   169   170   171   172   173   174   175   176   177   178   179   180   181   182   183   184   185   186   187   188   189   190   191   200   210   220   230   240   250   260   270   300   304