Product listing: Keencut 84" Evolution 2 Bench (60951) to Keencut 42" Laser Trued Safety Straight Edge (60003)

Page
View by: Title (A-Z)  |  Title (Z-A)  |  Price (High-to-Low)  |  Price (Low-to-High)  |  Popularity  |  Best Sellers  |  Category  |  Product Number
  1. Keencut 84" Evolution 2 Bench (60951), Keencut brand

    • Aluminum base plate for easy alignment of the Evolution-E2 mounting brackets.
    • Unique leg to beam fixing brackets apply incredible strength to Evolution 2 Benches.
    • Adjustable feet allow the bench to be installed on uneven floors without compromising accuracy.
    • Once the Evolution-E2 is installed, only one 3/4" thick worktop is needed to bring the cutter base level to the worktop (worktop not included, 3/4" MDF or finished plywood recommended).
    • When not in use, the cutter bar’s swing-over capability allows it to be folded under the Evolution 2 Bench, resulting in an unobstructed workbench surface.
    Part #: 60951

    $981.00

  2. Keencut 80" Table Edge Rotary Cutter (TE) (60632), Keencut brand

    • Unique sub-surface monorail bearing system.
    • Twin rotary blades and full-length fixed blade strip.
    • Large diameter cutting wheels to prevent them from jumping up on top of the blade.
    • Heavy duty plastic cutting head.
    • Two integral roller clamps and full-length fixed blade strip.
    Part #: 60632

    $571.50

  3. Keencut 80" Sabre 2 General Purpose Cutter (60737), Keencut brand

    • Rear loading blade holder for swift replacement; blades will never pull out in heavy materials.
    • Fully equipped and ready to work with 10 medium duty blades included. Accepts standard utility blades.
    • Integral base-plate with metric parallel indents and a cut groove.
    • Self-levelling hinges for materials up to 13mm (1/2").
    • Quick fit thread cap for easy accessory attachment.
    Part #: 60737

    $1134.00

  4. Keencut 80" Advanced Rotary Cutter (ARC) (60613), Keencut brand

    • Unique sub-surface monorail bearing system.
    • Twin rotary blades and full-length fixed blade strip.
    • Large diameter cutting wheels to prevent them from jumping up on top of the blade.
    • Heavy duty plastic cutting head.
    • Two integral roller clamps and full-length fixed blade strip.
    Part #: 60613

    $747.00

  5. Keencut 75cm Laser Trued Safety Straight Edge (60011), Keencut brand

    • Lightweight anodized aluminum frame.
    • Embedded steel edge for lasting accuracy.
    • Full-length metric & imperial scale.
    • Two full-length silicone grip cords protect and clamp your materials.
    • Laser-trued
    Part #: 60011

    $81.00

  6. Keencut 75" HSGM Hot Cut System (61737), Keencut brand

    • Hot Cut Size: 75”
    • Includes: Cutter bar, Heat Knife Carrier and Silicone tape
    • Optional: Stand Packages
    • Warranty:
    • 5-year parts warranty (excluding blades, clamp strips, site line strips and cutting wheels).
    Part #: 61737

    $1165.50

  7. Keencut 75" Hot Cut System with HSGM Heat Knife (61747), Keencut brand

    • Type R Blade. This general-use blade (1.14 inches of heated surface) cuts straight lines easily on glass surfaces and is designed for synthetic fabrics, webbing and ropes of up to 17mm diameter.
    • HSO-N Blade. This precision-based pointed blade with 9 mm of heated cutting area is designed for fine fabrics and is useful in projects requiring curved cuts.
    • 1-year limited warranty for manufacturer defects on HSGM heat knives.
    • Cut Size: 75"
    • Warrany: 1 Year limited
    Part #: 61747

    $1674.00

  8. Keencut 75" AZTC Hot Cut System (61727), Keencut brand

    • Hot Cut Size: 75”
    • Includes: Cutter bar, Heat Knife Carrier and Silicone tape
    • Optional: Stand Packages
    • Warranty:
    • 5-year parts warranty (excluding blades, clamp strips, site line strips and cutting wheels).
    Part #: 61727

    $1165.50

  9. Keencut 72" Laser Trued Safety Straight Edge (60007), Keencut brand

    • Lightweight anodized aluminum frame.
    • Embedded steel edge for lasting accuracy.
    • Full-length metric & imperial scale.
    • Two full-length silicone grip cords protect and clamp your materials.
    • Laser-trued
    Part #: 60007

    $148.50

  10. Keencut 64" Simplex Sheet Material Cutter (60456), Keencut brand

    • Rear loading blade holder for swift replacement; blades will never pull out in heavy materials.
    • Fully equipped and ready to work with 100 medium duty blades included. Accepts standard utility blades.
    • The lightweight extrusion design makes the Simplex an ideal general purpose cutter.
    • Quick fit thread cap for easy accessory attachment.
    • Blade locking thumb screw adds safety and convenience.
    Part #: 60456

    $549.00

  11. Keencut 64" Futura Safety Flexo Plate Cutter Series 2 (61916), Keencut brand

    • Designed specifically for cutting flexo printing plates.
    • Eliminates the onerous task of hand beveling, minimizes the risk of injury from remakes and bad cuts.
    • Perfectly designed for cutting and trimming floor graphics or other materials requiring seamless splices.
    • High performance self-aligning steel roller bearings operate on twin steel tracks.
    • Designed for a lifetime of straight, accurate, silent cutting. Can handle dense, hard-to-cut materials with no flex, side play or hooks.
    Part #: 61916

    $1795.50

  12. Keencut 64" Evolution-E2 Precision Cutter (60386), Keencut brand

    • Single handed positions, cutting, and clamping.
    • Straight and accurate cuts to within 0.008" by adjustable levelers.
    • Integral extruded alloy cutting base.
    • 5 year general warranty on all parts (except blades).
    • 20 year warranty on cutting bearings.
    Part #: 60386

    $1620.00

  13. Keencut 64" Evolution 2 Bench (60950), Keencut brand

    • Aluminum base plate for easy alignment of the Evolution-E2 mounting brackets.
    • Unique leg to beam fixing brackets apply incredible strength to Evolution 2 Benches.
    • Adjustable feet allow the bench to be installed on uneven floors without compromising accuracy.
    • Once the Evolution-E2 is installed, only one 3/4" thick worktop is needed to bring the cutter base level to the worktop (worktop not included, 3/4" MDF or finished plywood recommended).
    • When not in use, the cutter bar’s swing-over capability allows it to be folded under the Evolution 2 Bench, resulting in an unobstructed workbench surface.
    Part #: 60950

    $702.00

  14. Keencut 63" Excalibur 5000 Substrate Cutter (60376), Keencut brand

    • Ready mounted integral tools with rotating wheel for maximum convenience.
    • Control for cutting rigid PVC up to 1/2" thick.
    • Fitted counterbalance for less fatigue, addicents, and easy loading of materials.
    • Single cut line and sightline strip for maximum accuracy with all tools.
    • Twin-Wheel cutting head for shearing 1/8" Uncoated Masonite, heavy mat board and 3/8" Sintra.
    Part #: 60376

    $3379.50

  15. Keencut 60cm Laser Trued Safety Straight Edge (60010), Keencut brand

    • Lightweight anodized aluminum frame.
    • Embedded steel edge for lasting accuracy.
    • Full-length metric & imperial scale.
    • Two full-length silicone grip cords protect and clamp your materials.
    • Laser-trued
    Part #: 60010

    $67.50

  16. Keencut 60" Table Edge Rotary Cutter (TE) (60631), Keencut brand

    • Unique sub-surface monorail bearing system.
    • Twin rotary blades and full-length fixed blade strip.
    • Large diameter cutting wheels to prevent them from jumping up on top of the blade.
    • Heavy duty plastic cutting head.
    • Two integral roller clamps and full-length fixed blade strip.
    Part #: 60631

    $477.00

  17. Keencut 60" Sabre 2 General Purpose Cutter (60736), Keencut brand

    • Rear loading blade holder for swift replacement; blades will never pull out in heavy materials.
    • Fully equipped and ready to work with 10 medium duty blades included. Accepts standard utility blades.
    • Integral base-plate with metric parallel indents and a cut groove.
    • Self-levelling hinges for materials up to 13mm (1/2").
    • Quick fit thread cap for easy accessory attachment.
    Part #: 60736

    $990.00

  18. Keencut 60" Laser Trued Safety Straight Edge (60006), Keencut brand

    • Lightweight anodized aluminum frame.
    • Embedded steel edge for lasting accuracy.
    • Full-length metric & imperial scale.
    • Two full-length silicone grip cords protect and clamp your materials.
    • Laser-trued
    Part #: 60006

    $135.00

  19. Keencut 60" Advanced Rotary Cutter (ARC) (60609), Keencut brand

    • Unique sub-surface monorail bearing system.
    • Twin rotary blades and full-length fixed blade strip.
    • Large diameter cutting wheels to prevent them from jumping up on top of the blade.
    • Heavy duty plastic cutting head.
    • Two integral roller clamps and full-length fixed blade strip.
    Part #: 60609

    $643.50

  20. Keencut 54" Laser Trued Safety Straight Edge (60005), Keencut brand

    • Lightweight anodized aluminum frame.
    • Embedded steel edge for lasting accuracy.
    • Full-length metric & imperial scale.
    • Two full-length silicone grip cords protect and clamp your materials.
    • Laser-trued
    Part #: 60005

    $126.00

  21. Keencut 50" Futura Safety Flexo Plate Cutter Series 2 (61912), Keencut brand

    • Designed specifically for cutting flexo printing plates.
    • Eliminates the onerous task of hand beveling, minimizes the risk of injury from remakes and bad cuts.
    • Perfectly designed for cutting and trimming floor graphics or other materials requiring seamless splices.
    • High performance self-aligning steel roller bearings operate on twin steel tracks.
    • Designed for a lifetime of straight, accurate, silent cutting. Can handle dense, hard-to-cut materials with no flex, side play or hooks.
    Part #: 61912

    $1705.50

  22. Keencut 48" Laser Trued Safety Straight Edge (60004), Keencut brand

    • Lightweight anodized aluminum frame.
    • Embedded steel edge for lasting accuracy.
    • Full-length metric & imperial scale.
    • Two full-length silicone grip cords protect and clamp your materials.
    • Laser-trued
    Part #: 60004

    $112.50

  23. Keencut 45mm Textile Blade Holder (1pk) (60397), Keencut brand

    • Work with: Evolution-E2, Sabre Series 2, Javelin Series 2 and Javelin Integra
    • Quantity: 1pk
    • Part Number: 60397
    • Work with Evolution-E2, Sabre Series 2, Javelin Series 2 and Javelin Integra
    • For cutting textile, thin paper, fabric and other flimsy materials.
    Part #: 60397

    $90.00

  24. Keencut 45mm Standard Circular Textile Blades (10pk) (69133), Keencut brand

    • Work with: Evolution-E2, Sabre Series 2, Javelin Series 2 and Javelin Integra
    • Length: 45mm
    • Quantity: 10 Per Pack
    • Work with Evolution-E2, Sabre Series 2, Javelin Series 2 and Javelin Integra
    • Used for cutting textiles, thin paper, fabric and other flimsy materials
    Part #: 69133

    $27.00

  25. Keencut 45mm Premium Textile Blades (10pk) (69132), Keencut brand

    • Work with: Evolution-E2, Sabre Series 2, Javelin Series 2 and Javelin Integra
    • Length: 45mm
    • Quantity: 10 Per Pack
    • Work with Evolution-E2, Sabre Series 2, Javelin Series 2 and Javelin Integra
    • Used for cutting textiles, thin paper, fabric and other flimsy materials
    Part #: 69132

    $144.00

  26. Keencut 45cm Laser Trued Safety Straight Edge (60009), Keencut brand

    • Lightweight anodized aluminum frame.
    • Embedded steel edge for lasting accuracy.
    • Full-length metric & imperial scale.
    • Two full-length silicone grip cords protect and clamp your materials.
    • Laser-trued
    Part #: 60009

    $63.00

  27. Keencut 44" Simplex Sheet Material Cutter (60455), Keencut brand

    • Rear loading blade holder for swift replacement; blades will never pull out in heavy materials.
    • Fully equipped and ready to work with 100 medium duty blades included. Accepts standard utility blades.
    • The lightweight extrusion design makes the Simplex an ideal general purpose cutter.
    • Quick fit thread cap for easy accessory attachment.
    • Blade locking thumb screw adds safety and convenience.
    Part #: 60455

    $490.50

  28. Keencut 44" Evolution-E2 Precision Cutter (60384), Keencut brand

    • Single handed positions, cutting, and clamping.
    • Straight and accurate cuts to within 0.008" by adjustable levelers.
    • Integral extruded alloy cutting base.
    • 5 year general warranty on all parts (except blades).
    • 20 year warranty on cutting bearings.
    Part #: 60384

    $1453.50

  29. Keencut 44" Evolution 2 Bench (60949), Keencut brand

    • Aluminum base plate for easy alignment of the Evolution-E2 mounting brackets.
    • Unique leg to beam fixing brackets apply incredible strength to Evolution 2 Benches.
    • Adjustable feet allow the bench to be installed on uneven floors without compromising accuracy.
    • Once the Evolution-E2 is installed, only one 3/4" thick worktop is needed to bring the cutter base level to the worktop (worktop not included, 3/4" MDF or finished plywood recommended).
    • When not in use, the cutter bar’s swing-over capability allows it to be folded under the Evolution 2 Bench, resulting in an unobstructed workbench surface.
    Part #: 60949

    $580.50

  30. Keencut 42" Laser Trued Safety Straight Edge (60003), Keencut brand

    • Lightweight anodized aluminum frame.
    • Embedded steel edge for lasting accuracy.
    • Full-length metric & imperial scale.
    • Two full-length silicone grip cords protect and clamp your materials.
    • Laser-trued
    Part #: 60003

    $99.00

Items 1-15 of 22

Display Type List Grid
Page:   1   100   200   370   380   390   400   410   420   430   440   450   460   461   462   463   464   465   466   467   468   469   470   471   472   473   474   475   476   477   478   479   480   481   482   483   484   485   486   487   488   489   490   500   510   520   530   540   550   560   570   600   700   800   900   1,000   1,091