Product listing: Keencut Evolution3 124" BenchTop Cutter (61289) to Keencut 75" Hot Cut System with HSGM Heat Knife (61747)

Page
View by: Title (A-Z)  |  Title (Z-A)  |  Price (High-to-Low)  |  Price (Low-to-High)  |  Popularity  |  Best Sellers  |  Category  |  Product Number
  1. Keencut Evolution3 124" BenchTop Cutter (61289), Keencut brand

    • Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
    • The Lift-and-Hover saves time and avoids mistakes allowing users to line up their cuts quicker and more accurately.
    • Site line strip enables operators to see exactly where the cut line is.
    • The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
    • Anti-sag system holds the cutter bar level for accurate line-up.
    Part #: 61289

    $1777.50

  2. Keencut Evolution3 104" SmartFold Cutter (61388), Keencut brand

    • Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
    • The Lift-and-Hover saves time and avoids mistakes allowing users to line up their cuts quicker and more accurately.
    • Site line strip enables operators to see exactly where the cut line is.
    • The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
    • Swing-down under-bench storage to leave work surface clear.
    Part #: 61388

    $2007.00

  3. Keencut Evolution3 104" FreeHand Cutter Bar (61278), Keencut brand

    • Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
    • Site line strip enables operators to see exactly where the cut line is.
    • The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
    • Anti-sag system holds the cutter bar level for accurate line-up.
    • Minimal setup: calibrated 'out of the box' accuracy.
    Part #: 61278

    $1206.00

  4. Keencut Evolution3 104" BenchTop Cutter (61288), Keencut brand

    • Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
    • The Lift-and-Hover saves time and avoids mistakes allowing users to line up their cuts quicker and more accurately.
    • Site line strip enables operators to see exactly where the cut line is.
    • The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
    • Anti-sag system holds the cutter bar level for accurate line-up.
    Part #: 61288

    $1539.00

  5. Keencut Evolution 2 Bench (FK-E2B), Keencut brand

    • Aluminum base plate for easy alignment of the Evolution-E2 mounting brackets.
    • Unique leg to beam fixing brackets apply incredible strength to Evolution 2 Benches.
    • Adjustable feet allow the bench to be installed on uneven floors without compromising accuracy.
    • Once the Evolution-E2 is installed, only one 3/4" thick worktop is needed to bring the cutter base level to the worktop (worktop not included, 3/4" MDF or finished plywood recommended).
    • When not in use, the cutter bar’s swing-over capability allows it to be folded under the Evolution 2 Bench, resulting in an unobstructed workbench surface.
    Part #: FK-E2B
  6. Keencut Creaser Tool Head for Evolution3 Series Cutters (61395), Keencut brand

    • Works with Evolution3 Series Cutters
    • Adjustable pressure to suit a range of materials.
    • Creases corrugated and plain card.
    • Works with Evolution3 Series Cutters
    • Creases corrugated and plain card.
    Part #: 61395

    $99.00

  7. Keencut Composite Twin Wheel Cutter Head for Excalibur 5000 and 1000x Cutters (1pk) (69125), Keencut brand

    • Work with: Excalibur 5000 and 1000x Cutters
    • Quantity: 1 Per Pack
    • Part Number: 69125
    • Work with Excalibur 5000 and 1000x Cutters
    • Shears 1/8" Masonite, heavy mat board and 3/8" PVC board
    Part #: 69125

    $162.00

  8. Keencut Classic Rotary Cutting Wheel - 1pk (FK-68110), Keencut brand

    • Type: Cutting wheel
    • Compatible With: Classic trimmer
    • Quantity: 1 Per Pack
    • Part Number: FK-68110
    • Type: Cutting wheel
    Part #: FK-68110

    $67.50

  9. Keencut Big Bench Xtra Cutting Table Workstation (FK-BBXCTW), Keencut brand

    • Position or remove your Javelin Xtra cutter in seconds without using a single tool.
    • Lift & hold levers allow a single operator to feed, align and cut materials with ease.
    • Aluminum base-plate with metric parallel indents and cut groove.
    • Full length Metric & Imperial scale.
    • Full-length grip strip for clamping.
    Part #: FK-BBXCTW
  10. Keencut Big Bench Xtra 92" Cutting Table Workstation (60932), Keencut brand

    • Position or remove your Javelin Xtra cutter in seconds without using a single tool.
    • Lift & hold levers allow a single operator to feed, align and cut materials with ease.
    • Aluminum base-plate with metric parallel indents and cut groove.
    • Full length Metric & Imperial scale.
    • Full-length grip strip for clamping.
    Part #: 60932

    $1026.00

  11. Keencut Big Bench Xtra 73" Cutting Table Workstation (60930), Keencut brand

    • Position or remove your Javelin Xtra cutter in seconds without using a single tool.
    • Lift & hold levers allow a single operator to feed, align and cut materials with ease.
    • Aluminum base-plate with metric parallel indents and cut groove.
    • Full length Metric & Imperial scale.
    • Full-length grip strip for clamping.
    Part #: 60930

    $774.00

  12. Keencut Big Bench Xtra 53" Cutting Table Workstation (60928), Keencut brand

    • Position or remove your Javelin Xtra cutter in seconds without using a single tool.
    • Lift & hold levers allow a single operator to feed, align and cut materials with ease.
    • Aluminum base-plate with metric parallel indents and cut groove.
    • Full length Metric & Imperial scale.
    • Full-length grip strip for clamping.
    Part #: 60928

    $697.50

  13. Keencut Big Bench Xtra 132" Cutting Table Workstation (60936), Keencut brand

    • Position or remove your Javelin Xtra cutter in seconds without using a single tool.
    • Lift & hold levers allow a single operator to feed, align and cut materials with ease.
    • Aluminum base-plate with metric parallel indents and cut groove.
    • Full length Metric & Imperial scale.
    • Full-length grip strip for clamping.
    Part #: 60936

    $1170.00

  14. Keencut Big Bench Xtra 112" Cutting Table Workstation (60934), Keencut brand

    • Position or remove your Javelin Xtra cutter in seconds without using a single tool.
    • Lift & hold levers allow a single operator to feed, align and cut materials with ease.
    • Aluminum base-plate with metric parallel indents and cut groove.
    • Full length Metric & Imperial scale.
    • Full-length grip strip for clamping.
    Part #: 60934

    $1093.50

  15. Keencut AZTC Heat Knife Carrier (60399), Keencut brand

    • Designed specifically for fabric graphics cutting and finishing
    • Fits on the Sabre, Sabre 2, Evolution and Evolution-E2 cutter bars
    • The carrier device accepts the AZTC heat knives and blades.
    • Designed specifically for fabric graphics cutting and finishing,
    • The carrier device accepts the AZTC heat knives and blades.
    Part #: 60399

    $234.00

  16. Keencut ARC and TE Replacement Cutting Wheels (1 Set) (69124), Keencut brand

    • Work with: ARC & TE trimmers
    • Quantity: 1 set per pack
    • Part Number: 69124
    • Work with ARC & TE trimmers
    • Cutting wheels can only be used with the black cutting head
    Part #: 69124

    $135.00

  17. Keencut ARC and TE Replacement Cutting Head (1 pk) (69122), Keencut brand

    • Work with: Advanced Rotary Cutter (ARC) & Table Edge Trimmer (TE)
    • Quantity: 1pk
    • Part Number: 69122
    • Work with Advanced Rotary Cutter (ARC) & Table Edge Trimmer (TE)
    • Complete cutting head with cutting wheels attached.
    Part #: 69122

    $157.50

  18. Keencut Aluminum Twin-Wheel Cutting Head for SteelTrak Cutters - 1pk (69127), Keencut brand

    • Type: Cutting Head
    • Compatible With: SteelTrak Series Cutters
    • Material: Aluminum
    • Quantity: 1 Pack
    • Part Number: 69127
    Part #: 69127

    $157.50

  19. Keencut 90cm Laser Trued Safety Straight Edge (60012), Keencut brand

    • Lightweight anodized aluminum frame.
    • Embedded steel edge for lasting accuracy.
    • Full-length metric & imperial scale.
    • Two full-length silicone grip cords protect and clamp your materials.
    • Laser-trued
    Part #: 60012

    $90.00

  20. Keencut 86" Flexo Futura Cutter (61820), Keencut brand

    • Cutting head is mounted on roller bearings running on steel tracks.
    • 20 year warranty on the bearings.
    • Easy to change blade cartridges for switching between cutting materials in seconds.
    • Ergonomically designed cutting head makes it easy to use over long periods - comfortable for left or right-handed users.
    • The cutting head has two blade holders, a vertical cutter on the right hand side and a bevel cutter on the left.
    Part #: 61820

    $1615.50

  21. Keencut 84" Simplex Sheet Material Cutter FK (60457), Keencut brand

    • Rear loading blade holder for swift replacement; blades will never pull out in heavy materials.
    • Fully equipped and ready to work with 100 medium duty blades included. Accepts standard utility blades.
    • The lightweight extrusion design makes the Simplex an ideal general purpose cutter.
    • Quick fit thread cap for easy accessory attachment.
    • Blade locking thumb screw adds safety and convenience.
    Part #: 60457

    $558.00

  22. Keencut 84" Futura Safety Flexo Plate Cutter Series 2 (61920), Keencut brand

    • Designed specifically for cutting flexo printing plates.
    • Eliminates the onerous task of hand beveling, minimizes the risk of injury from remakes and bad cuts.
    • Perfectly designed for cutting and trimming floor graphics or other materials requiring seamless splices.
    • High performance self-aligning steel roller bearings operate on twin steel tracks.
    • Designed for a lifetime of straight, accurate, silent cutting. Can handle dense, hard-to-cut materials with no flex, side play or hooks.
    Part #: 61920

    $1885.50

  23. Keencut 84" Evolution-E2 Precision Cutter (60387), Keencut brand

    • Single handed positions, cutting, and clamping.
    • Straight and accurate cuts to within 0.008" by adjustable levelers.
    • Integral extruded alloy cutting base.
    • 5 year general warranty on all parts (except blades).
    • 20 year warranty on cutting bearings.
    Part #: 60387

    $1674.00

  24. Keencut 84" Evolution 2 Bench (60951), Keencut brand

    • Aluminum base plate for easy alignment of the Evolution-E2 mounting brackets.
    • Unique leg to beam fixing brackets apply incredible strength to Evolution 2 Benches.
    • Adjustable feet allow the bench to be installed on uneven floors without compromising accuracy.
    • Once the Evolution-E2 is installed, only one 3/4" thick worktop is needed to bring the cutter base level to the worktop (worktop not included, 3/4" MDF or finished plywood recommended).
    • When not in use, the cutter bar’s swing-over capability allows it to be folded under the Evolution 2 Bench, resulting in an unobstructed workbench surface.
    Part #: 60951

    $931.50

  25. Keencut 80" Table Edge Rotary Cutter (TE) (60632), Keencut brand

    • Unique sub-surface monorail bearing system.
    • Twin rotary blades and full-length fixed blade strip.
    • Large diameter cutting wheels to prevent them from jumping up on top of the blade.
    • Heavy duty plastic cutting head.
    • Two integral roller clamps and full-length fixed blade strip.
    Part #: 60632

    $540.00

  26. Keencut 80" Sabre 2 General Purpose Cutter (60737), Keencut brand

    • Rear loading blade holder for swift replacement; blades will never pull out in heavy materials.
    • Fully equipped and ready to work with 10 medium duty blades included. Accepts standard utility blades.
    • Integral base-plate with metric parallel indents and a cut groove.
    • Self-levelling hinges for materials up to 13mm (1/2").
    • Quick fit thread cap for easy accessory attachment.
    Part #: 60737

    $1075.50

  27. Keencut 80" Advanced Rotary Cutter (ARC) (60613), Keencut brand

    • Unique sub-surface monorail bearing system.
    • Twin rotary blades and full-length fixed blade strip.
    • Large diameter cutting wheels to prevent them from jumping up on top of the blade.
    • Heavy duty plastic cutting head.
    • Two integral roller clamps and full-length fixed blade strip.
    Part #: 60613

    $706.50

  28. Keencut 75cm Laser Trued Safety Straight Edge (60011), Keencut brand

    • Lightweight anodized aluminum frame.
    • Embedded steel edge for lasting accuracy.
    • Full-length metric & imperial scale.
    • Two full-length silicone grip cords protect and clamp your materials.
    • Laser-trued
    Part #: 60011

    $76.50

  29. Keencut 75" HSGM Hot Cut System (61737), Keencut brand

    • Hot Cut Size: 75”
    • Includes: Cutter bar, Heat Knife Carrier and Silicone tape
    • Optional: Stand Packages
    • Warranty:
    • 5-year parts warranty (excluding blades, clamp strips, site line strips and cutting wheels).
    Part #: 61737

    $1102.50

  30. Keencut 75" Hot Cut System with HSGM Heat Knife (61747), Keencut brand

    • Type R Blade. This general-use blade (1.14 inches of heated surface) cuts straight lines easily on glass surfaces and is designed for synthetic fabrics, webbing and ropes of up to 17mm diameter.
    • HSO-N Blade. This precision-based pointed blade with 9 mm of heated cutting area is designed for fine fabrics and is useful in projects requiring curved cuts.
    • 1-year limited warranty for manufacturer defects on HSGM heat knives.
    • Cut Size: 75"
    • Warrany: 1 Year limited
    Part #: 61747

    $1557.00

Items 1-15 of 22

Display Type List Grid
Page:   1   100   200   380   390   400   410   420   430   440   450   460   465   466   467   468   469   470   471   472   473   474   475   476   477   478   479   480   481   482   483   484   485   486   487   488   489   490   491   492   493   494   500   510   520   530   540   550   560   570   600   700   800   900   1,000   1,100   1,105