Product listing: Keencut Big Bench Xtra 112" Cutting Table Workstation (60934) to Keencut 54" Laser Trued Safety Straight Edge (60005)
-
Keencut Big Bench Xtra 112" Cutting Table Workstation (60934), Keencut brand
- Position or remove your Javelin Xtra cutter in seconds without using a single tool.
- Lift & hold levers allow a single operator to feed, align and cut materials with ease.
- Aluminum base-plate with metric parallel indents and cut groove.
- Full length Metric & Imperial scale.
- Full-length grip strip for clamping.
Part #: 60934 -
Keencut AZTC Heat Knife Carrier (60399), Keencut brand
- Designed specifically for fabric graphics cutting and finishing
- Fits on the Sabre, Sabre 2, Evolution and Evolution-E2 cutter bars
- The carrier device accepts the AZTC heat knives and blades.
- Designed specifically for fabric graphics cutting and finishing,
- The carrier device accepts the AZTC heat knives and blades.
Part #: 60399 -
Keencut ARC and TE Replacement Cutting Wheels (1 Set) (69124), Keencut brand
- Work with: ARC & TE trimmers
- Quantity: 1 set per pack
- Part Number: 69124
- Work with ARC & TE trimmers
- Cutting wheels can only be used with the black cutting head
Part #: 69124 -
Keencut ARC and TE Replacement Cutting Head (1 pk) (69122), Keencut brand
- Work with: Advanced Rotary Cutter (ARC) & Table Edge Trimmer (TE)
- Quantity: 1pk
- Part Number: 69122
- Work with Advanced Rotary Cutter (ARC) & Table Edge Trimmer (TE)
- Complete cutting head with cutting wheels attached.
Part #: 69122 -
Keencut Aluminum Twin-Wheel Cutting Head for SteelTrak Cutters - 1pk (69127), Keencut brand
- Type: Cutting Head
- Compatible With: SteelTrak Series Cutters
- Material: Aluminum
- Quantity: 1 Pack
- Part Number: 69127
Part #: 69127 -
Keencut 90cm Laser Trued Safety Straight Edge (60012), Keencut brand
- Lightweight anodized aluminum frame.
- Embedded steel edge for lasting accuracy.
- Full-length metric & imperial scale.
- Two full-length silicone grip cords protect and clamp your materials.
- Laser-trued
Part #: 60012 -
Keencut 84" Simplex Sheet Material Cutter FK (60457), Keencut brand
- Rear loading blade holder for swift replacement; blades will never pull out in heavy materials.
- Fully equipped and ready to work with 100 medium duty blades included. Accepts standard utility blades.
- The lightweight extrusion design makes the Simplex an ideal general purpose cutter.
- Quick fit thread cap for easy accessory attachment.
- Blade locking thumb screw adds safety and convenience.
Part #: 60457 -
Keencut 84" Futura Safety Flexo Plate Cutter Series 2 (61920), Keencut brand
- Designed specifically for cutting flexo printing plates.
- Eliminates the onerous task of hand beveling, minimizes the risk of injury from remakes and bad cuts.
- Perfectly designed for cutting and trimming floor graphics or other materials requiring seamless splices.
- High performance self-aligning steel roller bearings operate on twin steel tracks.
- Designed for a lifetime of straight, accurate, silent cutting. Can handle dense, hard-to-cut materials with no flex, side play or hooks.
Part #: 61920 -
Keencut 84" Evolution-E2 Precision Cutter (60387), Keencut brand
- Single handed positions, cutting, and clamping.
- Straight and accurate cuts to within 0.008" by adjustable levelers.
- Integral extruded alloy cutting base.
- 5 year general warranty on all parts (except blades).
- 20 year warranty on cutting bearings.
Part #: 60387 -
Keencut 84" Evolution 2 Bench (60951), Keencut brand
- Aluminum base plate for easy alignment of the Evolution-E2 mounting brackets.
- Unique leg to beam fixing brackets apply incredible strength to Evolution 2 Benches.
- Adjustable feet allow the bench to be installed on uneven floors without compromising accuracy.
- Once the Evolution-E2 is installed, only one 3/4" thick worktop is needed to bring the cutter base level to the worktop (worktop not included, 3/4" MDF or finished plywood recommended).
- When not in use, the cutter bar’s swing-over capability allows it to be folded under the Evolution 2 Bench, resulting in an unobstructed workbench surface.
Part #: 60951 -
Keencut 80" Table Edge Rotary Cutter (TE) (60632), Keencut brand
- Unique sub-surface monorail bearing system.
- Twin rotary blades and full-length fixed blade strip.
- Large diameter cutting wheels to prevent them from jumping up on top of the blade.
- Heavy duty plastic cutting head.
- Two integral roller clamps and full-length fixed blade strip.
Part #: 60632 -
Keencut 80" Sabre 2 General Purpose Cutter (60737), Keencut brand
- Rear loading blade holder for swift replacement; blades will never pull out in heavy materials.
- Fully equipped and ready to work with 10 medium duty blades included. Accepts standard utility blades.
- Integral base-plate with metric parallel indents and a cut groove.
- Self-levelling hinges for materials up to 13mm (1/2").
- Quick fit thread cap for easy accessory attachment.
Part #: 60737 -
Keencut 80" Advanced Rotary Cutter (ARC) (60613), Keencut brand
- Unique sub-surface monorail bearing system.
- Twin rotary blades and full-length fixed blade strip.
- Large diameter cutting wheels to prevent them from jumping up on top of the blade.
- Heavy duty plastic cutting head.
- Two integral roller clamps and full-length fixed blade strip.
Part #: 60613 -
Keencut 75cm Laser Trued Safety Straight Edge (60011), Keencut brand
- Lightweight anodized aluminum frame.
- Embedded steel edge for lasting accuracy.
- Full-length metric & imperial scale.
- Two full-length silicone grip cords protect and clamp your materials.
- Laser-trued
Part #: 60011 -
Keencut 75" HSGM Hot Cut System (61737), Keencut brand
- Hot Cut Size: 75”
- Includes: Cutter bar, Heat Knife Carrier and Silicone tape
- Optional: Stand Packages
- Warranty:
- 5-year parts warranty (excluding blades, clamp strips, site line strips and cutting wheels).
Part #: 61737 -
Keencut 75" Hot Cut System with HSGM Heat Knife (61747), Keencut brand
- Type R Blade. This general-use blade (1.14 inches of heated surface) cuts straight lines easily on glass surfaces and is designed for synthetic fabrics, webbing and ropes of up to 17mm diameter.
- HSO-N Blade. This precision-based pointed blade with 9 mm of heated cutting area is designed for fine fabrics and is useful in projects requiring curved cuts.
- 1-year limited warranty for manufacturer defects on HSGM heat knives.
- Cut Size: 75"
- Warrany: 1 Year limited
Part #: 61747 -
Keencut 75" AZTC Hot Cut System (61727), Keencut brand
- Hot Cut Size: 75”
- Includes: Cutter bar, Heat Knife Carrier and Silicone tape
- Optional: Stand Packages
- Warranty:
- 5-year parts warranty (excluding blades, clamp strips, site line strips and cutting wheels).
Part #: 61727 -
Keencut 72" Laser Trued Safety Straight Edge (60007), Keencut brand
- Lightweight anodized aluminum frame.
- Embedded steel edge for lasting accuracy.
- Full-length metric & imperial scale.
- Two full-length silicone grip cords protect and clamp your materials.
- Laser-trued
Part #: 60007 -
Keencut 64" Simplex Sheet Material Cutter (60456), Keencut brand
- Rear loading blade holder for swift replacement; blades will never pull out in heavy materials.
- Fully equipped and ready to work with 100 medium duty blades included. Accepts standard utility blades.
- The lightweight extrusion design makes the Simplex an ideal general purpose cutter.
- Quick fit thread cap for easy accessory attachment.
- Blade locking thumb screw adds safety and convenience.
Part #: 60456 -
Keencut 64" Futura Safety Flexo Plate Cutter Series 2 (61916), Keencut brand
- Designed specifically for cutting flexo printing plates.
- Eliminates the onerous task of hand beveling, minimizes the risk of injury from remakes and bad cuts.
- Perfectly designed for cutting and trimming floor graphics or other materials requiring seamless splices.
- High performance self-aligning steel roller bearings operate on twin steel tracks.
- Designed for a lifetime of straight, accurate, silent cutting. Can handle dense, hard-to-cut materials with no flex, side play or hooks.
Part #: 61916 -
Keencut 64" Evolution-E2 Precision Cutter (60386), Keencut brand
- Single handed positions, cutting, and clamping.
- Straight and accurate cuts to within 0.008" by adjustable levelers.
- Integral extruded alloy cutting base.
- 5 year general warranty on all parts (except blades).
- 20 year warranty on cutting bearings.
Part #: 60386 -
Keencut 64" Evolution 2 Bench (60950), Keencut brand
- Aluminum base plate for easy alignment of the Evolution-E2 mounting brackets.
- Unique leg to beam fixing brackets apply incredible strength to Evolution 2 Benches.
- Adjustable feet allow the bench to be installed on uneven floors without compromising accuracy.
- Once the Evolution-E2 is installed, only one 3/4" thick worktop is needed to bring the cutter base level to the worktop (worktop not included, 3/4" MDF or finished plywood recommended).
- When not in use, the cutter bar’s swing-over capability allows it to be folded under the Evolution 2 Bench, resulting in an unobstructed workbench surface.
Part #: 60950 -
Keencut 63" Excalibur 5000 Substrate Cutter (60376), Keencut brand
- Ready mounted integral tools with rotating wheel for maximum convenience.
- Control for cutting rigid PVC up to 1/2" thick.
- Fitted counterbalance for less fatigue, addicents, and easy loading of materials.
- Single cut line and sightline strip for maximum accuracy with all tools.
- Twin-Wheel cutting head for shearing 1/8" Uncoated Masonite, heavy mat board and 3/8" Sintra.
Part #: 60376 -
Keencut 60cm Laser Trued Safety Straight Edge (60010), Keencut brand
- Lightweight anodized aluminum frame.
- Embedded steel edge for lasting accuracy.
- Full-length metric & imperial scale.
- Two full-length silicone grip cords protect and clamp your materials.
- Laser-trued
Part #: 60010 -
Keencut 60" Table Edge Rotary Cutter (TE) (60631), Keencut brand
- Unique sub-surface monorail bearing system.
- Twin rotary blades and full-length fixed blade strip.
- Large diameter cutting wheels to prevent them from jumping up on top of the blade.
- Heavy duty plastic cutting head.
- Two integral roller clamps and full-length fixed blade strip.
Part #: 60631 -
Keencut 60" Table Edge Rotary Cutter (TE) - 60631 - Open Box (MYR-19-188-8), Keencut brand
- Unique sub-surface monorail bearing system.
- Twin rotary blades and full-length fixed blade strip.
- Large diameter cutting wheels to prevent them from jumping up on top of the blade.
- Heavy duty plastic cutting head.
- Two integral roller clamps and full-length fixed blade strip.
Part #: MYR-19-188-8 -
Keencut 60" Sabre 2 General Purpose Cutter (60736), Keencut brand
- Rear loading blade holder for swift replacement; blades will never pull out in heavy materials.
- Fully equipped and ready to work with 10 medium duty blades included. Accepts standard utility blades.
- Integral base-plate with metric parallel indents and a cut groove.
- Self-levelling hinges for materials up to 13mm (1/2").
- Quick fit thread cap for easy accessory attachment.
Part #: 60736 -
Keencut 60" Laser Trued Safety Straight Edge (60006), Keencut brand
- Lightweight anodized aluminum frame.
- Embedded steel edge for lasting accuracy.
- Full-length metric & imperial scale.
- Two full-length silicone grip cords protect and clamp your materials.
- Laser-trued
Part #: 60006 -
Keencut 60" Advanced Rotary Cutter (ARC) (60609), Keencut brand
- Unique sub-surface monorail bearing system.
- Twin rotary blades and full-length fixed blade strip.
- Large diameter cutting wheels to prevent them from jumping up on top of the blade.
- Heavy duty plastic cutting head.
- Two integral roller clamps and full-length fixed blade strip.
Part #: 60609 -
Keencut 54" Laser Trued Safety Straight Edge (60005), Keencut brand
- Lightweight anodized aluminum frame.
- Embedded steel edge for lasting accuracy.
- Full-length metric & imperial scale.
- Two full-length silicone grip cords protect and clamp your materials.
- Laser-trued
Part #: 60005
