Product listing: Challenge Three Knife Trimmer Top Front Replacement Blade (JH-31401) to Challenge CMT 330 3-Knife High Speed Steel Replacement Blade (JH-31470HSS)

Page
View by: Title (A-Z)  |  Title (Z-A)  |  Price (High-to-Low)  |  Price (Low-to-High)  |  Popularity  |  Best Sellers  |  Category  |  Product Number
  1. Challenge Three Knife Trimmer Top Front Replacement Blade (JH-31401), MyBinding brand

    • Compatible Models: Challenge Three Knife Trimmer
    • Material: Standard Inlay
    • Holes: 4
    • Length: 13"
    • With: 5"
    Part #: JH-31401

    $196.09

  2. Challenge TC Three-Knife Book Trimmer (CMT-330), Challenge brand

    • Capability to trim landscape formatted books up to 12.1" (307 mm) x 12.9" (328 mm).
    • Full high-speed digital control for fast and accurate set-ups in under 6 seconds.
    • Bar code system for fully automated set-up.
    • Simultaneous in-line and near-line book feeding option to maximize utilization.
    • Automatic size detection of untrimmed book blocks.
    Part #: CMT-330

    $73995.00

  3. Challenge Spartan 185SA Replacement Blade - 63017 (JH-31660), MyBinding brand

    • Compatible With: Challenge Spartan 185SA Paper Cutter
    • Type of Blade: Standard Inlay
    • Dimensions (L x W x T): 22.500" x 2.630" x .375"
    • Holes/Slots: 6H
    • Hole Size: 5/16"-8
    Part #: JH-31660

    $190.79

  4. Challenge Spartan 185SA 18.5" Semi Automatic Electric Paper Cutter (CH-SPARTAN185SA), Challenge brand

    • Cutting: Powered by a 1-1/2 HP gear drive motor
    • Manual Clamping: The hand wheel design provides a strong clamping force resulting in high quality cuts.
    • Manual Backgauge Control: Hand Wheel Control
    • LED Digital Backgauge Position Indicator: With +/-0.01" (+/-0.1mm) backgauge accuracy - provides for easier operator interface, higher productivity, and easier repeatable accuracy than a hard to read indicator on a scale as is used with other brands.
    • Laser Red LED Cut Line Light: produces a bright easy to see cut line.
    Part #: CH-SPARTAN185SA

    $8995.00

  5. Challenge Spartan 185AEP 18.5' Electronic Programmable Cutter (CH-SPARTAN185AEP), Challenge brand

    • Electric Power Clamping: Generates over 3000 lbs (1,360 kg) of clamping force
    • Independent Clamping Function: Allows for a "clamp only" operation
    • Electric Powered Backgauge: Controlled by the electronic console with handwheel for micro adjustments
    • 3" Lighted LCD Display: Displays backguague location with +/-0.01" (+/-0.1mm) backgauge accuracy - provides for easier operator interface, higher productivity, and easier repeatable accuracy than a hard to read indicator on a scale as is used with other brands.
    • Programmable: Operator friendly software uses soft key menu prompts for easy programming. During a program the 3" LCD displays up to 5 consecutive cuts to aid the operator in navigating a job.
    Part #: CH-SPARTAN185AEP

    $11495.00

  6. Challenge Spartan 185A 18.5' Automatic Electric Paper Cutter (CH-SPARTAN185A), Challenge brand

    • Electric Power Clamping: Generates over 3000 lbs (1,360 kg) of clamping force
    • Independent Clamping Function: Allows for a "clamp only" operation
    • Manual Backgauge Control: Hand Wheel Control
    • LED Digital Backgauge Position Indicator: With +/-0.01" (+/-0.1mm) backgauge accuracy - provides for easier operator interface, higher productivity, and easier repeatable accuracy than a hard to read indicator on a scale as is used with other brands.
    • Laser Red LED Cut Line Light: produces a bright easy to see cut line.
    Part #: CH-SPARTAN185A

    $10395.00

  7. Challenge Spartan 150SA 15.75" Semi Automatic Electric Paper Cutter (CH-SPARTAN150SA), Challenge brand

    • Power Cutting: Electric power - 1/2HP Gear Drive Motor
    • Manual Clamping: Hand crank wheel system provides over 200% more clamping force than the lever clamping system. RESULT - a better cut.
    • Safety Guards: Safety covers over the front table (the cutting area) and rear table.
    • Safety Dual Cut Buttons: Requires the simultaneous use of both hands to operate.
    • Construction: Heavy Duty Steel, Cast Iron, and Cast Aluminum Construction gives it "Challenge durability". Hardened steel components and bronze bearings on most wear surfaces increase the life of the machine.
    Part #: CH-SPARTAN150SA

    $4745.00

  8. Challenge Spartan 150M 15.75" Manual Heavy-Duty Paper Cutter (CH-SPARTAN150M), Challenge brand

    • Cutting: Manual - Hand Lever Operation
    • Clamping: Manual - Hand-Crank. The hand-crank design for clamping creates a much higher clamping force than the lever design which results in a better quality cut.
    • LED Digital Backgauge Position Indicator with +/-0.01" (+/-0.1mm) Backgauge Accuracy - provides for easier operator interface, higher productivity, and easier repeatable accuracy than a hard to read indicator on a scale as is used in other brands.
    • Laser Red LED Cut Line Light - produces a very sharp, easy to see cut line without the replacement problems of incandescent bulbs.
    • Front Safety Shield interlocked with the cutting lever - provides protection for the operator during operation.
    Part #: CH-SPARTAN150M

    $2745.00

  9. Challenge Spartan 150A 15.75" Automatic Electric Paper Cutter w/ Power Clamp (CH-SPARTAN150A), Challenge brand

    • Power Cutting: Electric power - 1/2HP Gear Drive Motor
    • Automatic Power Clamping: Automatic power clamping improves productivity and makes cutting simple. All you need to do is lower the safety shield and press the two cutting buttons..
    • Safety Guards: Safety covers over the front table (the cutting area) and rear table.
    • Safety Dual Cut Buttons: Requires the simultaneous use of both hands to operate.
    • Construction: Heavy Duty Steel, Cast Iron, and Cast Aluminum Construction gives it "Challenge durability". Hardened steel components and bronze bearings on most wear surfaces increase the life of the machine.
    Part #: CH-SPARTAN150A

    $5245.00

  10. Challenge Spartan 150 Replacement Blade (JH31460), MyBinding brand

    • Compatible Models: Challenge Spartan 150
    • Material: Standard Inlay
    • Holes: 6
    • Length: 18.25"
    • With: 1.625"
    Part #: JH31460

    $164.29

  11. Challenge Spartan 150 HSS Replacement Blade (JH31460HSS), MyBinding brand

    • Compatible Models: Challenge Spartan 150
    • Material: High Speed Steel
    • Holes: 6
    • Length: 18.25"
    • With: 1.625"
    Part #: JH31460HSS

    $243.79

  12. Challenge PowerLift I Stack Lifter (CH-POWERLIFT1), Challenge brand

    • Handles a pallet up to 21.75” x 22”.
    • Lifts and Lowers up to 2,500 pounds.
    • Lifts to meet cutter table heights up to 36-1/2”.
    • Hydraulic Lifting Power
    • Welded Steel Frame Construction.
    Part #: CH-POWERLIFT1

    $6964.29

  13. Challenge Pak Rak XL Heavy Duty Paper Stock Truck (CH-PAK-RAK-XL), Challenge brand

    • Holds 14" x 20" Stock - Inward slant on each shelf keeps your stock tight to the corner for a square stack - even when moving between locations.
    • 12 shelf surface's to stack separate jobs. Another 4 shelves can be added.
    • 500 lb/227 kg Total Capacity
    • Portable - Four 5" hard rubber industrial casters and two side handles make these units easy to control and easy to roll from place to place.
    • Solid Construction - Shipped to you in one piece, the PAK-RAK-XL is constructed of heavy gauge, welded steel.
    Part #: CH-PAK-RAK-XL

    $12950.00

  14. Challenge Pak Rak Heavy Duty Paper Stock Truck (CH-PAK-RAK), Challenge brand

    • Holds 11" x 17"/28 x 43 cm Stock - Inward slant on each shelf keeps your stock tight to the corner for a square stack - even when moving between locations.
    • 12 shelf surface's to stack separate jobs. Another 4 shelves can be added.
    • 500 lb/227 kg Total Capacity
    • Portable - Four 5" hard rubber industrial casters and two side handles make these units easy to control and easy to roll from place to place.
    • Solid Construction - Shipped to you in one piece, the PAK-RAK is constructed of heavy gauge, welded steel.
    Part #: CH-PAK-RAK

    $994.00

  15. Challenge Paddy Wagon Heavy Duty Padding Press (CH-PADDYWAGON), Challenge brand

    • High Capacity: Holds up to 31" of paper for production padding environments
    • Simple 1-2-3 Operation: Ease of operations turns padding service into a value-added profit center.
    • Tilt & Load: With the double doors locked, tilt the PADDY WAGON back. The 30 Degrees table slant allows gravity to do all the work of aligning stock and keeping it square. Load up to 15,000 8 1/2" x 11" sheets of 20# bond - even more with smaller sheets.
    • Clamp: After loading is complete, aligned stacks are clamped in just seconds. Place the clamping bar on top or your paper, slide the self-locking, quick-release clamps down to the bar and tighten the screws.
    • Tilt & Pad: Tilt the PADDY WAGON back to the upright position, lift the doors to unlock and swing them open for complete access to your padding surface.
    Part #: CH-PADDYWAGON

    $744.00

  16. Challenge MS-5 Multi-Spindle Paper Drill (CH-MS5), Challenge brand

    • Side guide adjustment.
    • Backgauge adjustment.
    • Easy drill length adjustment.
    • 2"/ 5.1 cm hollow drill bits available in 13 sizes.
    • 2-1/2"/ 6.4 cm hollow drill bits available in 4 sizes.
    Part #: CH-MS5

    $12120.00

  17. Challenge Mini Padder Portable Padding Press (CH-MINIPADDER), Challenge brand

    • Portable, Compact & Economical
    • Load up to 5" high and up to 11" x 17" sized sheets
    • The Mini-Padder is just one in the line of Challenge products engineered to make your job easier.
    • Maximum Lift Height 5" / 12.7 cm
    • Maximum Lift Width: 17-1/2" / 44 cm
    Part #: CH-MINIPADDER

    $188.00

  18. Challenge Manual Single Cornering Machine (CH-RCM), Challenge brand

    • 6 sizes of cornering knives
    • Handles any size sheet
    • 2"/ 5 cm lift capacity
    • Manual operation
    • Precise cutting action
    Part #: CH-RCM

    $2995.00

  19. Challenge JF Single Spindle Paper Drill (CH-JFPAPERDRILL), Challenge brand

    • Convenient Foot Pedal Operation
    • 2" Drilling Capacity: Drills up to 2" lifts of stock in a single stroke.
    • 13 Hollow Drill Bit Sizes: Hole sizes range from 1/8" to 1/2" diameters.
    • Auto - Trip Side Guide: For muliple hole patterns, the versatile backguage offers up to four adjustable stop locations (additonal adjustable stops sold separately). The auto-trip feature automatically releases the paper guide to advance to the next stop setting upon the completion of each stroke cycle.
    • Adjustable Margins: Thumb screws easily lock the backgauge to the drill table. To adjust your margins simply loosen the screws and line up the gauge with the dual scales located on the drill table. Hole locations can be drilled up to a 4" margin from the edge of the paper.
    Part #: CH-JFPAPERDRILL

    $2450.00

  20. Challenge iJog Paper Jogger with Air Assist (CH-IJOGAIR), Challenge brand

    • Robust, electro-mechanical jogging action
    • Front-side loading
    • Foot pedal control
    • Adjustable air flow - dial from zero to 112 CFM
    • Two jogging speeds
    Part #: CH-IJOGAIR

    $1849.00

  21. Challenge Hydraulic Single Cornering Machine (CH-RCH), Challenge brand

    • 6 sizes of cornering knives
    • Handles any size sheet
    • 4"/ 10 cm lift capacity
    • Hydraulic powered
    • Precise cutting action
    Part #: CH-RCH

    $5995.00

  22. Challenge Handy-Jog Paper Jogger with Standard Tray (CH-HANDYJOGST), Challenge brand

    • Front Side Loading
    • Three Trays to Choose from - Standard (8.5" x 11"), Check Tray (9.5" x 12") and Large Tray (11" x 17")
    • Up to 11" x 17" stock tray
    • Powerful jogging action
    • Quiet operation
    Part #: CH-HANDYJOGST

    $494.00

  23. Challenge Handy-Jog Paper Jogger with LargeTray (CH-HANDYJOGXL), Challenge brand

    • Front Side Loading
    • Three Trays to Choose from - Standard (8.5" x 11"), Check Tray (9.5" x 12") and Large Tray (11" x 17")
    • Up to 11" x 17" stock tray
    • Powerful jogging action
    • Quiet operation
    Part #: CH-HANDYJOGXL

    $524.00

  24. Challenge Handy-Jog Paper Jogger with Check Tray (CH-HANDYJOGCH), Challenge brand

    • Front Side Loading
    • Three Trays to Choose from - Standard (8.5" x 11"), Check Tray (9.5" x 12") and Large Tray (11" x 17")
    • Up to 11" x 17" stock tray
    • Powerful jogging action
    • Quiet operation
    Part #: CH-HANDYJOGCH

    $539.00

  25. Challenge Handy-Drill Single Spindle Paper Drill (CH-HANDYDRILL), Challenge brand

    • 2-1/2" lift capacity in 4 different drill bit sizes (1/4", 5/16", 3/8", 1/2"). Machine can be converted to a 2" maximum lift capacity for a wider range of available hole sizes (1/8" to 1/2").
    • Safe to operate - Spindle motor automatically turns on when the pull-down lever is moved and automatically switches off when the lever returns to the up position.
    • Conveniently located chip collector cups - Located around the spindle, they include a sight gauge to signify when the cups are full and need to be emptied. The cups also serve as safety covers with interlock switches. When removed to change the drill bit or to empty the paper chips, power to the motor is locked out until the cups are replaced.
    • Adjustable backgauge stops - The backgauge includes 4 adjustable stops for drilling multiple hole pattern jobs. Just flip the switch and move your pile to the next setting.
    • Adjustable Margins: Thumb screws easily lock the backguage to the drill table. To adjust the margins, simply loosen the screws and line-up the gauge with the dual scales located on the drill table. Hole locations can be drilled up to 2.5" margin from the edge of the paper.
    Part #: CH-HANDYDRILL

    $1445.00

  26. Challenge Handy Padder Portable Padding Press (CH-HANDYPADDER), Challenge brand

    • Portable/Compact & Economical: Put away your bricks, blocks, and boards. The Challenge Handy-Padder design provides a portable and compact table-top padding device for the right price. The convenient turn style base of the Handy-Padder allows the operator to load, clamp and pad from a single position.
    • Stabilized Base: The Handy-Padder has an extended sheet metal stabilizer designed to eliminate tipping problems when loaded with stock.
    • Simple 1-2-3 Operation: Ease of operations turns padding service into a value-added profit center.
    • Lock & Load: Lock the removable plate in place. The 8 Degrees table slant allows gravity to do all the work of aligning stock and keeping it square. Load up to 8,000 8-1/2" x 11" sheets of 20# bond - even more with smaller sheets.
    • Clamp: After loading is complete, aligned stacks are clamped in just seconds. Place the clamping bar on top of your paper, slide the self-locking, quick-release clamps down to the bar and tighten the screws.
    Part #: CH-HANDYPADDER

    $479.00

  27. Challenge Handy Cart Paper Stock Truck (CH-HANDYCART), Challenge brand

    • Mobility & Control: Four 5" hard rubber swivel casters and four handles make your Handy-Cart easy to control and easy to roll from place to place.
    • Keeping Stock Square : Inward slant on each shelf keeps your stock tight to the corner for a square stack - even when moving between locations.
    • Solid Construction - Shipped to you in one piece, the HANDY-CART is constructed of heavy gauge, welded steel.
    • Products Working for You: The Handy-Cart is another great product value from Challenge! All of our products are engineered to make your job easier.
    • Full-size lower shelf with a lip to prevent items from sliding off.
    Part #: CH-HANDYCART

    $644.00

  28. Challenge EH-3 Hydraulic Three Spindle Paper Drill (CH-EH3), Challenge brand

    • Features:
    • Powerful hydraulic operation
    • 2-1/2"/ 6.4 cm drilling depth
    • Fast and easy drill head adjustments
    • Adjustable backgauge
    Part #: CH-EH3

    $7395.00

  29. Challenge CMT-130TC Book Trimmer (CMT-130BT), Challenge brand

    • Trim up to 2" / 50.8 mm thick perfect-bound books.
    • 10.5" Color Touch screen controller with graphical display of the system with live book location.
    • Fully-automated size change in under 10 seconds with no tools required.
    • Modular design – can be configured off-line, near-line, or in-line at any time.
    • Integrated bar code reader automates size changes between jobs.
    Part #: CMT-130BT

    $41600.00

  30. Challenge CMT 330 3-Knife High Speed Steel Replacement Blade (JH-31470HSS), MyBinding brand

    • Type of Blade: High Speed Steel
    • Dimensions (L x W x T): 14.500" x 2.750" x .375"
    • Holes/Slots: 6H
    • Hole Size: 3/8"-16
    • Type of Blade: High Speed Steel
    Part #: JH-31470HSS

    $325.39

Items 1-15 of 22

Display Type List Grid
Page:   1   100   200   300   400   500   630   640   650   660   670   680   690   700   710   722   723   724   725   726   727   728   729   730   731   732   733   734   735   736   737   738   739   740   741   742   743   744   745   746   747   748   749   750   751   760   770   780   790   800   810   820   830   900   1,000   1,091