Product listing: Ledco Econocraft 44" Laminator Roll Applicator (2044102U) to SEAL 65 EL-1 65" Wide Format Cold Roll Laminator (SEAL-65EL-1)

Page
View by: Title (A-Z)  |  Title (Z-A)  |  Price (High-to-Low)  |  Price (Low-to-High)  |  Popularity  |  Best Sellers  |  Category  |  Product Number
  1. Ledco Econocraft 44" Laminator Roll Applicator (2044102U) - $9698.99

    • A scrap rewind with an adjustable clutch takes up the release liner found on many pressure sensitive films.
    • Roller bearings, alloy construction and high quality motors insure a long and trouble-free life for these machines.
    • The laminating roller opening is adjustable in seconds and allows operators to work with different thickness materials.
    • A variable speed motor control allows operators to apply different materials to different substrates.
    • Interchangeable rubber rollers help keep maintenance costs down.
    Part #: 2044102U

    $9698.99

  2. Ledco Signmaster 44" Hot Roll Laminator & Mounter 110V (2044110) - $9698.99

    • A release liner take-up with an adjustable clutch, takes up the release liner found on most pressure-sensitive films.
    • Roller bearings, alloy construction and high quality motors insure a long and trouble-free life for these machines.
    • A variable speed motor control allows operators to apply different materials to different substrates. A preset 3-function switch allows operation in variable speed mode, a preset film speed mode and a preset pouch speed mode.
    • The feed tray is non-ferrous, so magnetic materials may be applied.
    • The supply roll tension knobs are important, because without some supply roll tension, most films and tapes will wrinkle during application.
    Part #: 2044110

    $9698.99

  3. Deluxe Stitcher 1/4" Wire Stitcher With Two 26D Heads (M1726D-AST) - $9670

    • Designed to staple both flat and saddle work ranging in thickness from 2 sheets to 1/4"
    • Equipped with two heads standard, but can be operated with as many as ten 26D heads installed at one time.
    • Maximum center to enter distance is 18", minimum is approximately 1-7/8".
    • The recommended wire sizes are as follows: 21 - 28 gauge round and 21x25 flat
    • Easily adjusted from saddle work to flat work by means of tilting the 6-1/2" x 33" work table. An adjustable work guide and adjustable work stops are easily attached to work table and provide for accurate registering of flat work for uniform spacing of staples.
    Part #: M1726D-AST

    $9670.00

  4. YUL Programmable 19" Electric Paper Cutter with Wifi/3G Option (EPC019) - $9650

    • Performance:
    • Fully programmable up to 100 programs x 100 steps
    • English, French and Spanish user interface
    • Micro Glide Backgauge eliminates bottom sheet from slipping under
    • Backgauge extremities spaced for small formats
    Part #: EPC019

    $9650.00

  5. HSM V-Press 610 Vertical Baling Press (HSM6110) - $9611.12

    • Low installation height and surface.
    • Special retaining claws optimize the compression of the pressing material, increasing both the loading volume and bale output.
    • Quick and easy press assembly.
    • Mechanical bale ejector.
    • High process reliability due to HSM TCS (TorsionControlSystem).
    Part #: HSM6110

    $9611.12

  6. Therm-O-Type Manual Foil-Tech Foil Fuser (TOT-MFT) - $9598

    • Maximum Sheet Size: 14.5" W x 2' L
    • Maximum Foil Roll Size: 24" W x 2000' L
    • Adjustable Speed: Yes
    • Adjustable Temperature: Yes
    • Core Size: 1"
    Part #: TOT-MFT

    $9598.00

  7. Accufast P4 Tabletop Address Printer (ACCUFAST-P4) - $9558

    • Variable speed vacuum transport.
    • Open throat design to print large pieces.
    • Modular - can be used in systems.
    • 2 inches of print split into 1 inch imagers.
    • Windows print driver with USB interface.
    Part #: ACCUFAST-P4

    $9558.00

  8. Count PerfMaster Air V3 18" Automatic Perforating and Scoring Machine (CPMASTERV3) - $9545

    • New and improved heavy-duty air feed eliminating marking and scuffing on documents
    • Interchangeable paper caliper used for open edge carbonless forms to heavy gauge glossy stock
    • 18" wide feed capacity
    • Quickly change from perfing to scoring in a matter of minutes
    • Simple to use one button operation speed control
    Part #: CPMASTERV3

    $9545.00

  9. Duplo Automatic Setting Bookletmaker with Corner and Side Staple Kit (DBM-150) - $9500

    • Connects to DSF-2200, DSC-10/20, and DFC-100
    • Isaberg Rapid stapler and staple cartridge
    • 16-job memory
    • Compact Size
    • Optional DBM-150T Trimmer
    Part #: DBM-150

    $9500.00

  10. SealerSales Heat Shrink Tunnel (18"W x 16"H x 44"L) (ST-1816-44) - $9496.89

    • Ideal for a wide variety of applications: laying bottles down, using full length PVC shrink sleeves, shrinking pre-form shrink bands over containers, using regular cut shrink bands, using as curing or drying tunnel.
    • Full Re-Circulating Shrink Tunnel.
    • Live Roller Rod Conveyor Provides Best Shrink Results.
    • Digital Temperature Control 0-400F.
    • Adjustable Air Velocity Control.
    Part #: ST-1816-44

    $9496.89

  11. Demo Pitney Bowes Relay 3000 Three Station Inserter (R4PIR30003S) - $9495.25

    • Versatile: The Relay 3000 inserting system gives you the flexibility to handle multiple fold types, page sizes, and outer envelope sizes.
    • Efficient: Load-on-the-fly sheet feeders and high capacity envelope feeder.
    • Stop manual folding: Manual feed on daily mail mode processes up to five pages stapled or unstapled.
    • Save time: Up to 20 common applications can be programmed.
    • Prevent costly errors: The built-in double-detection on all feeders auto stop clear deck and auto page separation.
    Part #: R4PIR30003S

    $9495.25

  12. Intimus 9000 Degausser for Hard Drive Shredder (349104) - $9475

    • NATO listed and NSM certified.
    • Clean and quiet solution to sanitize magnetic media.
    • Single Pass Pulse Technology.
    • Fast Slide Feeding Solution for single HDDs or batch mode.
    • Information Display.
    Part #: 349104

    $9475.00

  13. MBM Triumph 4850 18.625" Electric Paper Cutter with Digital Display (MBM-4850) - $9449

    • SCS (Safety Cutting System) package: hinged, transparent electronically controlled front safety guard; transparent safety cover on rear table; main switch and safety lock with key; electronically controlled, true two-hand operation; 24 volt controls (low voltage); patented IDEAL safety drive; automatic blade return from every position; automatic clamp return from every position; disc brake for instant blade stop; blade and cutting stick can be changed without removing covers; blade changing device covers cutting edge of blade; blade depth adjustment from outside of machine
    • Electric blade and clamp drive
    • Solingen steel blade
    • Solid steel bade carrier and adjustable blade guides
    • Automatic clamp is guided on both sides to apply even pressure along entire cutting width (can be lowered or raised independently from blade)
    Part #: MBM-4850

    $9449.00

  14. Graphic Whizard Wizard GW 6000 Number/Perf/Score/Slit Machine (GW6000) - $9425

    • 3,000 sheets per hour.
    • 1 number per head per sheet.
    • 1 or 2 Numbering Heads.
    • Tabletop model with automatic feed.
    • Crash numbering up to 10 part carbonless.
    Part #: GW6000

    $9425.00

  15. HSM 450.2cc Level P-4 Cross Cut Professional Paper Shredder (1503) - $9404.88

    • With its practical filling hopper, the HSM 450.2 is the answer if crumpled paper is frequently the material to be shredded.
    • Keypad for constant operation and reverse.
    • Auto stop when container is full or door is open.
    • Large filling hopper and integrated, rotating loading aid (security level 3 only).
    • Hardened steel cutters can handle occasional standard paper clips or staples.
    Part #: 1503

    $9404.88

  16. MBM Sprint 5000 Booklet Maker (MB-5000) - $9399

    • Jogs, staples, and folds in one operation
    • Quick and easy set-up and adjustment
    • Variable speed
    • Produces booklets up to 88 pages (off-line)*
    • On-line saddle, corner, and side stapling capability
    Part #: MB-5000

    $9399.00

  17. Rhin-O-Tuff Wide Format Electric 2:1 Wire Binding System (7500HW2) - $9265

    • Die with easy disengageable pins - Included
    • Inserter/Closer - Included
    • Automatic and Manual Reverse feature to reduce jamming in the punch
    • Punches up to 40 sheets or up to 80 pages of 20 lb paper
    • Rate of 25 cycles per minute
    Part #: 7500HW2

    $9265.00

  18. Stago HM-15/2 Twin-Head Heavy-Duty Electric Flat and Saddle Stapler (STGHM15/2) - $9240

    • Robust construction.
    • Two stapling head.
    • Processes flat or loop staples.
    • Support table with adjustable stops.
    • Compact ergonomic design.
    Part #: STGHM15/2

    $9240.00

  19. Rotatrim 118" PowerTech Electric Rotary Cutter (60460) - $9175

    • Chromed 1-1/2" square steel guide rail and all metal construction eliminates distortion.
    • Self-sharpening Sheffield tungsten steel cutting wheel and counterblade.
    • Two way cutting option by removing cover plate.
    • Transparent clamp strip and rubber gripper for firm positive clamping action.
    • A 10-1/2" rule and squaring arm is factory installed onto an all-metal base.
    Part #: 60460

    $9175.00

  20. Deluxe Stitcher M30-AST 7/8" Single Head Wire Stitcher (M30-AST-78) - $9030

    • A stitch capacity from 2 sheets up to 7/8"[22 mm] standard.
    • The ability to run flat, saddle, or corner stitched jobs.
    • Stab stitch capability up to 2" (51mm).
    • Wire Sizes: 20-28 gauge round or 19 x 21-1/2, 20x24 and 21x25 flat.
    • Clinch: moveable clincher for flat stitching and adjustable table height for stab stitching.
    Part #: M30-AST-78

    $9030.00

  21. Challenge Spartan 185SA 18.5" Semi Automatic Electric Paper Cutter (CH-SPARTAN185SA) - $8995

    • Cutting: Powered by a 1-1/2 HP gear drive motor
    • Manual Clamping: The hand wheel design provides a strong clamping force resulting in high quality cuts.
    • Manual Backgauge Control: Hand Wheel Control
    • LED Digital Backgauge Position Indicator: With +/-0.01" (+/-0.1mm) backgauge accuracy - provides for easier operator interface, higher productivity, and easier repeatable accuracy than a hard to read indicator on a scale as is used with other brands.
    • Laser Red LED Cut Line Light: produces a bright easy to see cut line.
    Part #: CH-SPARTAN185SA

    $8995.00

  22. NeuraLabel 600e High-Volume Full Color Laser Label Printer (HW-600e-120V) - $8995

    • Overview of the NeuraLabel 600e
    • Durable, commercial-grade printer, ideal for longer runs of 50, 500, or 5,000+ labels.
    • High Definition (HD) Color Printing technology provides sharp detail and rich, dramatic colors, while giving you control over your printing costs.
    • Single Pass Color Digital technology prints on media up to 140 lb. (220 gsm).
    • The industry‚Äôs most advanced multilevel LED printhead and unique microfine toner technology provide exceptional speed and image clarity.
    Part #: HW-600e-120V

    $8995.00

  23. Truline Preferred Pack Fully Adjustable Combination L' Sealer with Attached Shrink Tunnel (PP-1622MK) - $8995

    • L' Sealer Features
    • "Micro-Knife" Band Ribbon.
    • Power Belted Discharge Conveyor.
    • Dual Manet Clamping.
    • Pin Perf. Hole Punch.
    Part #: PP-1622MK

    $8995.00

  24. Formax FD 2036 AutoSeal High-Volume Tabletop Pressure Sealer (FD2036) - $8950

    • Operating Features:
    • Color Touchscreen Control Panel: Graphics-based and designed for easy, walk-up use.
    • Drop-In Feed System: A drop-in three roller feed system produces dependable feeding of forms with no paper fanning required.
    • Hopper Capacity: Up to 350 forms.
    • Fold Plates: Easy to adjust, with fine tune knobs for precision.
    Part #: FD2036

    $8950.00

  25. Martin Yale Mark VII Pro Series Air Feed Paper Folder (MK7000A) - $8919

    • Adjustable fold rollers.
    • Continuous bottom feed system.
    • Manual adjust sheet separator.
    • Manual paper guide and skew adjustments.
    • Removable cartridges for perforation and/or scoring.
    Part #: MK7000A

    $8919.00

  26. PostMark 3078 High Speed Automatic Letter Opener (P-3078) - $8874

    • High Speed. Opens up to 40,000 envelopes per hour. Opens mixed mail - from the smallest to the largest - completely. Opens up to 8 mm (1/3") thick envelopes. Entire system built to handle large flats and envelopes.
    • Reverse Flow Conveyor. Allows operator to stand in one place to both feed and to remove opened envelopes. This increases the production rate by approx. 50%.
    • Heavy Duty. Solid metal construction throughout. Made of steel using the highest quality components. Has 3 motors for better performance and longer life.
    • Simple and reliable. High degree of operational reliability.
    • High Speed. Opens up to 40,000 envelopes per hour. Opens mixed mail - from the smallest to the largest - completely. Opens up to 8 mm (1/3") thick envelopes. Entire system built to handle large flats and envelopes.
    Part #: P-3078

    $8874.00

  27. SealerSales Heat Shrink Tunnel (18"W x 12"H x 44"L) (ST-1812-44) - $7428.57

    • Ideal for a wide variety of applications: laying bottles down, using full length PVC shrink sleeves, shrinking pre-form shrink bands over containers, using regular cut shrink bands, using as curing or drying tunnel.
    • Full Re-Circulating Shrink Tunnel.
    • Live Roller Rod Conveyor Provides Best Shrink Results.
    • Digital Temperature Control 0-400F.
    • Adjustable Air Velocity Control.
    Part #: ST-1812-44

    $7428.57

  28. Royal Sovereign 65 Inch Wide Format Roll Laminator (RSH-1651) - $8820.95

    • Fast - Laminates pressure sensitive and thermal film up to 65" wide at a rate of 9.8' per minute.
    • Quality - Digital controls for temperature and speed help deliver a perfect finish.
    • Versatility - Designed for mounting, laminating & encapsulating individual of multiple copies of posters prints, POP signs, training aids, rigid or flexible signage floor graphics, trade show displays and much more.
    • Easy To Use - Simple one button operation plus remote control and foot pedal allow hands-free operation. Auto-Grip Hubs for easy replacement of film rolls
    • Convenient - Nine job memory setting feature for frequently used settings. Auto-grip film shafts for easy material handling. High quality silicone rubber rollers for both thermal or cold lamination applications.
    Part #: RSH-1651

    $8820.95

  29. Morgana DigiCreaser 33 Automatic Creasing Machine (775821) - $8750

    • Fast & easy to setup.
    • Fully automatic after feeding.
    • Bench top with small footprint.
    • Takes stock up to 0.015" (approx 150lb cover)*.
    • Rule and matrix guaranteed for life.
    Part #: 775821

    $8750.00

  30. SEAL 65 EL-1 65" Wide Format Cold Roll Laminator (SEAL-65EL-1) - $8742.03

    • Cold roll laminator confidently finishes a variety of applications.
    • Laminates graphics up to 65" wide.
    • Capable of laminating at speeds up to 14 feet/minute.
    • Manual nip adjustment up to 1" for handling of most substrates.
    • Durable uniframe construction requires no assembly and minimal maintenance.
    Part #: SEAL-65EL-1

    $8742.03

Items 1-15 of 22

Display Type List Grid
Page:   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   40   50   60   70   80   90   100   110   200   300   400   500   600   700   800   900   1,000   1,105