Product listing: GFP 363TH 63" Top Heat Wide Format Roll Laminator (363-TH) to SealerSales High Profile Entry-Level Pallet Stretch Wrapper (SPW-981HP)
Part #: 363-TH
- Adds top heat for better overlamination, mounting, and board pre-coating
- Easy set-up and low maintenance with a top heat boost.
- Labor saving 3" Aluminum Quick-Grip film shafts.
- Integrated rear rewind for roll-to-roll apps.
- Swing-up feed table and 38" output height.
Part #: TPI-4900E
- Programmability: 100 programs x 96 settings.
- Micro Glide Back Gauge.
- 5" Touch Screen.
- Back Gauge Control Knob.
- Optical Cut Line.
Part #: FD8650HS
- Meets the requirements of NSA/CSS specification for Level 6 Security shredding.
- EvenFlow Internal AutoOiler automatically oils cutting blades as needed for long-lasting performance.
- LED control panel with digital load indicator.
- Compact design for under-desk operation.
- Auto Start/Stop for care-free use.
Part #: FC9000-140
- Stickers / Decals
- Window Signage
- Highway Signage
- Heat Transfer Apparel
Part #: PC-450
- Safety Sequence Circuitry & Safety Mechanism: The knife is actuated by two-hand throw in switches. So, if either one of the two switches is released in the middle of cutting, the machine instantaneously stops. Further, the knife automatically moves up to its home position even if the switches are released after the knife has reached its lower dead point.
- Cutter & Illuminated Cut-Line: The cutting knife made of special steel ensures consistently high standard cutting quality for a prolonged period of time. Further, the built in illuminated cut-line indicator helps you find easily the cut-line without identifying the cut-line each time.
- Precise Backgauge Travel: The precision-built backgauge lead-screw enables you to make a trim cut as fine as 0.5mm (0.019"). The backgauge is operated by the handcrank at the front-table and can be locked if necessary.
- Simple Operation: There are no complicated switch controls except the two-hand knife switches. You need only three steps to complete the cutting job: setting up the cut size, clamping the stock, and depressing the two-hand knife switches. That's all.
- Cutting Witdh: 17.5"
Packaging Products Preferred Pack Uniform Semi-Automatic Carton Sealer with Top and Side Drive Belts (PP-554TS) - $6385
Part #: PP-554TS
- Case Handling: Minimum is 6" x 7" x 4" (L x W x H) and Maximum is 20" x 20" (W x H)
- Tape Heads: 2" (3" is available at no extra charge if specified with order. )
- Throughput Speed : 75 feet/minute
- Electrical/Air Requirements: 110 VAC, 4 amp
- Part Number: PP-554TS
Part #: SS-SR5AACM
- 3 1/4 Hp, 15 amp industrial duty saw motor.
- 1 3/4 Hp, 11 amp industrial duty router motor.
- 10 ft. Welded steel frame.
- Chrome plated 1 3/4" guide tubes.
- 8 Nylatron roller bearing systems.
Part #: FMMH-31
- 21/2" Drilling Capacity.
- Powerful hydraulic lift with foot pedal activation.
- Sturdy adjustable back-gauge.
- Easy to adjust moveable head design.
- Adjustable hydraulic lift speed
Part #: 104-Squarefold
- Increases the value of your booklets by giving them a professional, perfect bound look with the security of a stapled finish.
- It can be used as a hand-fed unit attached to the BM60 and BM61 Bookletmakers or linked to a wide range of traditional and digital finishing devices.
- Added advantages of the Morgana 104 Squarefold are much less packaging capacity and the ability to print onto the spine of thicker booklets.
- Capacity: 24 sheets of 20lb bond
- Speed: Up to 1800 books/hour
Part #: SIGMONT-65H
- High Grade Silicone Rollers for Consistent Lamination.
- Rear Slitters for Inline Print Separation.
- Front Facing Roller Nip Adjustment Crank.
- Maximum Lamination Speed of 49 ft/min.
- Foot Pedal and Rear Remote Included.
Part #: DA20394
- NSA/CSS 02-01 Approved for Top Secret Data Destruction.
- Automatic EvenFlow Lubricator provides continuous oil across the cutting cylinders to maintain peak performance.
- Precision milled cutting cylinders offer strength and reliability.
- Automatic jam protection reverses motor in the event of an overfeed.
- German engineered machine offering trouble free operation and peace of mind.
Part #: TOT-FT15
- Maximum Sheet Size: 15" Wide
- Maximum Foil Roll Size: 500' long Foil Rolls on 1” Core
- Adjustable Speed: Yes
- Adjustable Temperature: Yes
- Core Size: 1"
Part #: PT320-CC
- Productive and profitable machine to produce 24up business cards.
- Produce 250 business cards in less than 2 monutes.
- Uses lead edge cut mark registration to compensate for image shift.
- Able to process coated, non-coated and laminated stock.
- Easy to use LCD panel with 6 job program memory.
Part #: CO0750
- Collates variety of paper stocks and weights at speeds up to 3,600 sets per hour
- 275 sheet bin capacity
- Touch-button control panel with LED 4 digit counter simplifies set-up and operation
- Programming modes include preset batch, insertion, and an alternate bin mode for continuous production
- Adjustable stacking table for straight or criss-cross stacking
Part #: ST-1812-28
- Ideal for a wide variety of applications: laying bottles down, using full length PVC shrink sleeves, shrinking pre-form shrink bands over containers, using regular cut shrink bands, using as curing or drying tunnel.
- Full Re-Circulating Shrink Tunnel.
- Live Roller Rod Conveyor Provides Best Shrink Results.
- Digital Temperature Control 0-400F.
- Adjustable Air Velocity Control.
Part #: 60440
- Chromed 1-1/2" square steel guide rail and all metal construction eliminates distortion.
- Self-sharpening Sheffield tungsten steel cutting wheel and counterblade.
- Two way cutting option by removing cover plate.
- Transparent clamp strip and rubber gripper for firm positive clamping action.
- A 10-1/2" rule and squaring arm is factory installed onto an all-metal base.
Part #: 60383
- Vertical cutting length of 98" (250cm).
- 3 Turn and lock ready mounted tools for instant action.
- All three blades cut on the same line.
- Full length extra-grip clamping system.
- Integral counterbalance. The counterbalance eliminates the load from the cutting head. , and because operators are not lifting the full weight of the head, they can concentrate solely on cutting the material. Thus, increasing their output productivity and decreasing the time spent.
SealerSales 21" Tabletop Chamber Vacuum Sealer w/ Electric Cut-Off 3mm Seal Width (TC-520F) - $6077.49
Part #: TC-520F
- PD-01 basic digital control panel.
- Stainless steel construction.
- Clear see-through lid.
- Water resistant electrical box (IP-56).
- Bladder activated sealing.
Part #: 7000C4
- Coil Die with easy disengageable pins - Included
- Electric Coil Inserter and Crimpers - Included
- Attachment kit for mounting coil inserter on top of punch - Included
- Automatic and Manual Reverse feature to reduce jamming in the punch
- Punches up to 31 Sheets of 20 lb paper
Part #: PROTONPDS-100
- Compact and rugged design is portable and easily deployable.
- Automatic cycle provides fast, safe and reliable hard drive destruction in 10 seconds or less.
- Can operate with or without power (manually for emergency situations).
- Hard drives are bent approximately 90 degrees, which bends/breaks the platters and damges the heads, motor and circuit board.
- Maintenance free and completely self-contained. No messy fuilds or external components to deal with and no adjustments or calibration necessary.
Part #: V-590
- Speed. Processes up to 2,640 sheets per hour
- Usability. User-friendly, interactive control panel provides helpful prompts for effective and efficient operation
- Accuracy. Guide rollers prevent stock from curling, and new transport rollers and fine paper control enhance accuracy
- Miss, double, out-of-paper, jam, and interlock safety cover detection system
- Pre-programmed for cutting six popular paper sizes including: 8.5" into 1, 2, or 3 even cuts or 11" into 1, 2, 3, or 4 even cuts or 14" into 1, 2, 3, 4, or 5 even cuts
Part #: 04CBCUBE
- Bind one document every second.
- Up to 45 times faster than traditional methods.
- Greater strength and quality for your documents.
- Offline, automated thermal binding.
- Features additional upgrades including increased quality and strength of the bound documents as well as improved appearance of the machine
Part #: XM6300
- Convenient refills allow for quick and easy changes between applications.
- Apply laminate and high tack adhesive from edge-to-edge.
- Aggressive adhesive, coupled with high pressure rollers, improves both transfer and bonding qualities.
- Cold lamination will allow for trimming right up to and even through documents without any peeling or lifting.
- Pro Machines do not come preloaded to allow users to configure units to best suit their needs.
Part #: CH-RCH
- 6 sizes of cornering knives
- Handles any size sheet
- 4"/ 10 cm lift capacity
- Hydraulic powered
- Precise cutting action
Part #: ELXT110
- Multiple Types of Bind: Hard Cover Binding, Soft Cover Binding, Strip Binding, Tear-Off Pads
- Affordable, compact and fully featured.
- Dust free spine roughening. Features the exclusive Paper Grain Opening (“PGO”) system that opens the paper grain with very little noise and there is no paper dust
- No set-up times or book format adjustments needed.
- Self adjusts for book thickness from 2 to 400 pages
Part #: FD6104
- 5" Color Touchscreen: Graphical interface provides quick, easy setup, with job list on home screen
- Versatile: 2 1/2 stations insert 1-2 sheets plus BREs/small inserts
- Speed: Produces up to 1,350 filled envelopes per hour
- 15 Programmable Jobs: Handy for recurring or frequently processed applications
- Dedicated BRE/Insert Feeder: Fold and/or insert sheets and BREs
Part #: PP-1519ECMC
- Tunnel Features
- Fully Re-Circulating Air Chambers.
- AC Variable Speed Drive, 0-60 FPM.
- Live Roller Rod Conveyor.
- Automatic Cool Down with Shut Off.
Part #: PP1808-44
- Fully Re-Circulating Chamber.
- 4 Directional Air Flow.
- State-of-the-Art AC Varaible.
- Automatic Tunnel Cool Down with Shut Off.
- Thermal Overload Protection on All Motors.
Part #: HDP0101
- Punches a hole completely through the hard drive, making it unreadable
- Suitable for 2 1/2" and 3 1/2" drives (single feed)
- Adjustable feed chute made of high quality steel
- Handy slide lever for easy selection of hard drive size
- Punching die made of hardened, nickel-plated steel
Part #: SPW-981HP
- Can be loaded by forklift only. Ramp not included.
- Mechanical break stretch @ 100%.
- 3,000lb load capacity.
- Soft start, fixed speed turntable at 10RPM.
- Can accommodate pallet loads up to 85" high.