Product listing: GBC Octiva LM Textured Satin 5mil 43" x 250' - GBC (9301584) to Lassco Wizer Cornerounder Manual Corner Cutter - Corner Rounders (CR-50)

Page
View by: Title (A-Z)  |  Title (Z-A)  |  Price (High-to-Low)  |  Price (Low-to-High)  |  Popularity  |  Best Sellers  |  Category  |  Product Number
  1. GBC Octiva LM Textured Satin 5mil 43" x 250' - GBC (9301584) - $784.59

      Film Type: GBC Octiva Lo-Melt Textured Satin Thickness: 5mil Roll Width: 43inch Roll Length: 250feet Film Finish: Textured Satin Core Size: 3inch GBC Part Number: 9301584 , G9301584
    Part #: 9301584

    $784.59

  2. Seybold 64" Dayton 6ZF-278B Replacement Blade (JH-50100) - $784.39

      Type of Blade: Standard Inlay Dimensions (L x W x T): 75.000inchx5.000inch x .495inch Holes/Slots: 36H Hole Size: 1/2inch -12
    Part #: JH-50100

    $784.39

  3. Akiles Diamond 6 and 7 Corner Rounding Machine 1/4" Radius Knife w/ Lower Blade Pad and Base - Corner Rounders (AKAD6/7-K6) - $784.00


      Replacement Knife for the Akiles Diamond 6 and 7 Corner Rounding Machine
      Includes 1/8" radius thick blade, lower blade pad and blade base.
      Maximum capacity of 1.97"
      Radius: 1/4"
      Part Number: AD6/7-K6
      Replacement Knife for the Akiles Diamond 6 and 7 Corner Rounding Machine
      Includes 1/4" radius thick blade, lower blade pad and blade base.
      Maximum capacity of 1.97"
      Radius: 1/4" ßÃЊ“Á
    Part #: AKAD6/7-K6

    $784.00

  4. Akiles Diamond 6 and 7 Corner Rounding Machine 1/8" Radius Knife w/ Lower Blade Pad and Base - Corner Rounders (AKAD6/7-K3.5) - $784


      Replacement Knife for the Akiles Diamond 6 and 7 Corner Rounding Machine
      Includes 1/8" radius thick blade, lower blade pad and blade base.
      Maximum capacity of 1.97"
      Radius: 1/8"
      Part Number: AKAD6/7-K3.5
      Replacement Knife for the Akiles Diamond 6 and 7 Corner Rounding Machine
      Includes 1/8" radius thick blade, lower blade pad and blade base.
      Radius: 1/8"
      Part Number: AKAD6/7-K3.5 ßÃЊ“Á
    Part #: AKAD6/7-K3.5

    $784.00

  5. Akiles Diamond 6 and 7 Corner Rounding Machine 3/8" Radius Knife w/ Lower Blade Pad and Base - Corner Rounders (AKAD6/7-K10) - $784


      Replacement Knife for the Akiles Diamond 6 and 7 Corner Rounding Machine
      Includes 3/8" radius thick blade, lower blade pad and blade base.
      Maximum capacity of 1.97"
      Radius: 3/8"
      Part Number: AD6/7-K10
      Replacement Knife for the Akiles Diamond 6 and 7 Corner Rounding Machine
      Includes 3/8" radius thick blade, lower blade pad and blade base.
      Maximum capacity of 1.97"
      Radius: 3/8" ßÃЊ“Á
    Part #: AKAD6/7-K10

    $784.00

  6. Akiles Diamond 6 and 7 Corner Rounding Machine 5/8" Radius Knife w/ Lower Blade Pad and Base - Corner Rounders (AKAD6/7-K16) - $784


      Product Type: Akiles Knife Thick Blade with Pad - Base
      Knife Radius: 5/8"
      Cutting Capacity: 2" of material
      Compatibility: Akiles Diamond 6 or 7 Corner Rounder
      Part Number: AKAD6/7-K16
      Product Type: Akiles Knife Thick Blade with Pad - Base
      Knife Radius: 5/8"
      Cutting Capacity: 2" of material
      Compatibility: Akiles Diamond 6 or 7 Corner Rounder ßÃЊ“Á
    Part #: AKAD6/7-K16

    $784.00

  7. GBC Arctic Lo-Tack 1 Mil 51" x 150' (3" Core) - GBC (9300913A) - $782.49

      Film Type: GBC Arctic Lo-Tack Thickness: 1Mil Roll Width: 51inch Roll Length: 150feet Core Size: 3inch GBC Part Number: 9300913A
    Part #: 9300913A

    $782.49

  8. GBC MC12 12" Manual Twin Loop Wire Closer - Wire Binding (1770600) - $781.23


      Spine-size adjustment knobs.
      Durable, heavy-duty design.
      Non-slip rubber feet.
      Bind sheets up to 12".
      Fully compatible with both 2:1 Pitch and 3:1 Pitch Wire Binding Spines
      GBC Item number 1770600 , G1770600
      Warranty: 90 Day Manufacturer Warranty
      Spine-size adjustment knobs.
      Durable, heavy-duty design.
      Non-slip rubber feet.
      Bind sheets up to 12". ßÃЊ“Á
    Part #: 1770600

    $781.23

  9. Drytac JetMounter JM18 Electric 18 Inch Pressure Sensitive Cold Mount Laminator - Roll Laminators (DTJM18) - $780.95


      Max Laminating Width: 18.25 inches (464mm)
      Width: 25.5 inches (648mm)
      Depth: 11.75 inches (299mm)
      Height: 13 inches (330mm)
      Weight: 51 lbs (23 kg)
      Roller Diameter: 2.5 inches (63.5mm)
      Max Nip Opening: 0.75 inches (19mm)
      Warranty: 1 Year Manufacturer Warranty
      Power: 115 VAC 50/60 Hz 50w
      Speed Range: 2.5 - 18 fpm (76 - 305cm / minute)
      Speed Range: 2.5 - 18 fpm (76 - 305cm / minute)
      Max Laminate Width: 18.25"
      Laminating Thickness: 3/4"
      Hot or Cold: Cold ßÃЊ“Á
    Part #: DTJM18

    $780.95

  10. Keencut Javelin Series 2 44" Wide-Format Cutter Bar - Foster (60275) - $778.5


      Standard twist lifts provide a simple and convenient lift and hold solution.
      Unique Extrusion design for unparalleled cutting accuracy.
      Quick fit thread cap for easy accessory attachment.
      Blade locking thumb screw for safety and convenience.
      Rotating knob for ultra-fine blade depth adjustment.
      Two full length silicone grip cords to protect and easily clamp your materials.
      High-grade polymer bearing system for lasting accuracy.
      Accurate to within 0.008" for extreme cutting.
      Includes 10 Graphik Blades.
      5 Year general warranty on all parts (except blades).
      20 Year warranty on cutting bearings.
      Optional Textile Cutting Wheel for cutting fabric, thin film, and textiles.
      Works perfectly with the Big Bench or independent Surface Mounted Lift & Hold bracket.
      Standard twist lifts provide a simple and convenient lift and hold solution.
      Unique Extrusion design for unparalleled cutting accuracy.
      Quick fit thread cap for easy accessory attachment.
      Max Cut Length: 44" ßÃЊ“Á
    Part #: 60275

    $778.50

  11. Rotatrim 26" Technical Rotary Cutter - Foster Keencut (60300) - $778.24


      Sheffield tungsten steel self-sharpening cutting wheel and counterblade.
      Chromed 11/2" square stainless steel guide rail.
      Two way cutting option by removing cover plate.
      Transparent clamp strip and rubber gripper for firm positive clamping action.
      101/2" Precision rule and squaring arm for accurate cutting.
      Satin finish extruded aluminum baseboard with parallel indents.
      5 Year General Warranty (excludings blades & cutting wheel).
      Sheffield tungsten steel self-sharpening cutting wheel and counterblade.
      Chromed 1 1/2" square stainless steel guide rail.
      Satin finish extruded aluminum baseboard with parallel indents.
      Max Cut Length: 26" ßÃЊ“Á
    Part #: 60300

    $778.24

  12. Quartet 6' x 4' Radius Fabric 3 Door Enclosed Bulletin Board - Indoor Enclosed Boards (QRT-2367L) - $775.88

      Highly durable 6feet W x 4feet H enclosed gray fabric bulletin board backed by high-density fiberboard secures documents with push pins 3 locking shatterproof acrylic doors allow for posting, protecting and easily updating important messages Delivers quality performance when communication is needed in employee lounges and other high-traffic areas Self-healing surface eliminates unsightly pin holes and will not fade or crumble like traditional cork boards, even after years of use High-density backing for maximum pin-holding power, ensuring documents stay securely posted Easily mount board to wall with specially designed security lock system Durable aluminum cabinet with rounded corners, full-length hinges and contemporary graphite-finish frame draw all eyes to important displays Includes 1 key per lock Also 100% Satisfaction Guaranteed GBC Quartet Part Number: 2367L Primary UPC: 034138236734
    Part #: QRT-2367L

    $775.88

  13. Keencut Big Bench Xtra 73" Cutting Table Workstation - Foster (60930) - $774


      Position or remove your Javelin Xtra cutter in seconds without using a single tool.
      Lift & hold levers allow a single operator to feed, align and cut materials with ease.
      Aluminum base-plate with metric parallel indents and cut groove.
      Full length Metric & Imperial scale.
      Full-length grip strip for clamping.
      Base-plate leveling brackets make it possible to fine adjust leveling and gain optimum accuracy.
      Create the ideal bench surface using a variety of worktop fixings (worktop not included).
      Adjustable feet allow the Big Bench Xtra to stand on uneven floors without compromising accuracy.
      Unique leg to beam fixing brackets apply incredible strength to the Big Bench Xtra.
      The unique system allows for a wide variety of customisation options on any Big Bench Xtra.
      Surface Mount Lift & Hold turns your existing work surface into a precision cutting station.
      Bench Xtra includes an integral lift and hold mechanism on each side
      Constructed of strong anodised aluminum extrusions.
      5 year general warranty.
      Position or remove your Javelin Xtra cutter in seconds without using a single tool.
      Lift & hold levers allow a single operator to feed, align and cut materials with ease.
      Aluminum base-plate with metric parallel indents and cut groove.
      Max Cut Length: 73" ßÃЊ“Á
    Part #: 60930

    $774.00

  14. Schneider Senator 132 52" Cut Replacement Blade (JH-46800) - $773.79

      Type of Blade: Standard Inlay Dimensions (L x W x T): 61.653inchx5.669inch x .470inch Holes/Slots: 39H Hole Size: M12
    Part #: JH-46800

    $773.79

  15. Wilson Jones 1" Blue Casebound DublLock Ring Oversize Binders 12pk - Specialty Binders (W346-70NB) - $773.53


      1" binder size holds 175 sheets secure with heavy duty DublLock® round rings
      Durable vinyl covers
      Heavy weight interior chipboard material
      Binder holds 11" x 17" sheets
      Sheet Capacity: 175 Sheets
      Locking Rings: No
      Pockets: No
      Sheet Size: 11" x 17" ßÃЊ“Á
    Part #: W346-70NB

    $773.53

  16. Drytac MediaShield Deep Textured Canvastex UV 10mil 51" x 150' (CX51150) - $770.63

      MediaShield UV HeatSet (also referred to as a heat-assist) overlaminating films are often described as a hybrid between thermal and pressure sensitive films. MediaShield films bond well to inkjet output with high ink coverage - even on photo gloss paper and digital photo laser output (Lambda / Lightjet). The image can be trimmed flush, or even die-cut without fear of delamination. Due to its quick setup / curing time, MediaShield laminated graphics can be handled or rolled immediately after processing. Unlike most heat-activated films, MediaShield overlaminating films are protected by a release liner because the adhesive on these films is slightly tacky when cool. Tips For Applying MediaShield UV Heatset Films: MediaShield UV Heatset films are an excellent choice for laminating multiple images which have been mounted onto a single board or substrate because they minimize air entrapment around the edges of each image. To keep the film from stretching as it becomes soft and pliable when heated, apply only minimal brake tension to the unwind supply shaft and the release liner take-up. Mediashield and thermal overlaminating films can be combined when encapsulating a graphic. For example: MediaShield Emerytex on the front and MHL White Backing on the back of the image is an ideal combination for trade show applications. Adjust the take up shaft so that the release liner is removed just prior to entering the nip rollers. By reducing the adhesive's exposure to the air, there is less chance of picking up dust particles.
    Part #: CX51150

    $770.63

  17. Polar Prism Saber 137 Replacement Blade (JH-44900) - $768.49

      Compatible Models: Polar, Prism, Saber 137 Material: Standard Inlay Holes: 30 Length: 63.189inch Width: 6.299inch Thickness: 0.541inch Notes: OEM# 231127 Part Number: JH-44900 , 44900 , KN44900
    Part #: JH-44900

    $768.49

  18. GBC Octiva LM Textured Satin 5mil 51" x 250' - GBC (9301585) - $767.99

      Film Type: GBC Octiva Lo-Melt Textured Satin Thickness: 5mil Roll Width: 51inch Roll Length: 250feet Film Finish: Textured Satin Core Size: 3inch GBC Part Number: 9301585 , G9301585
    Part #: 9301585

    $767.99

  19. GBC Arctic Dura Mount 51" x 300' (3" Core) - GBC (9300858) - $765.89

      Film Type: GBC Arctic Dura Mount Thickness: n/a Roll Width: 51inch Roll Length: 300feet Film Finish: n/a Core Size: 3inch GBC Part Number: 93008588
    Part #: 9300858

    $765.89

  20. GBC Arctic Removable 38" x 150' (3" Core) - GBC (9300866) - $765.89

      Film Type: GBC Arctic Removable Thickness: n/a Roll Width: 38inch Roll Length: 150feet Film Finish: n/a Core Size: 3inch GBC Part Number: 9300866 , G9300866
    Part #: 9300866

    $765.89

  21. Graphic Whizard CreaseMaster PT-MCP Manual Scoring Machine - Scoring Equipment (GW-MCP) - $762.5


      Channel crease die system to eliminate cracking.
      Easy to use handle operation.
      Simple switch from creasing to perfing.
      Adjustable backstops for accuracy.
      Built in ruler for accurate size adjustments.
      High quality "burr-free" perf.
      Quick set up time.
      Small footprint.
      Optional crease widths to accomodate varying stock.
      Width can accomodate a 12x18" digital sheet landscape.
      Feeding System: Manual stock placement with back guides
      Max.Speed (Impact crease): 750/hour (operator dependent)
      Stock Weight: Maximum 450 gsm
      Width can accomodate a 12x18" digital sheet landscape. ßÃЊ“Á
    Part #: GW-MCP

    $762.50

  22. GBC Arctic White Mount 38" x 300' (3" Core) - GBC (9300904) - $761.79

      Film Type: GBC Arctic White Mount Thickness: n/a Roll Width: 38inch Roll Length: 300feet Film Finish: n/a Core Size: 3inch GBC Part Number: 9300904
    Part #: 9300904

    $761.79

  23. Akiles Electric Plastic Comb Binding Machine (ALPHABIND-CE) - $759.00

      Electric Punching, Manual Binding: The AlphaBind-CE includes a heavy duty electric punch and a manual plastic comb opener. Foot Pedal operated: The convenient foot pedal punch control allows you to hold your document with both hands during punching. Punching Length : Twelve inch punching length with an open throat design for punching legal size or longer documents. High-Volume Punch Capacity : With its unique punching mechanism, you can punch up to 20sheets of 20# paper per lift. Binding Capacity : The AlphaBind-CE can handle all sizes of plastic combs up to 2inch in diameter. Die Disengagement Pins : Allows punching of all paper sizes without any partially punched holes. Depth Margin Control : Adjustable depth margins (4 settings) offers the best margin distance for each book size. Large Waste Compartment : Easily accessible from the front of the machine. Heavy Duty Design : All metal construction. Weight : 61 Lbs 1Year Manufacturer Warranty
    Part #: ALPHABIND-CE

    $759.00

  24. Swingline DX20-19 Jam Free Departmental Cross-Cut Shredder - 1758605B - Security Level (SWI-1758605) - $754

      Number of Users: 5-10 Model: DX20-19 Swingline Item Number: 1758605Cut Style/security level: Cross-cut/3 perfect for confidential and strategic documents Sheet Capacity: 20 Waste Capacity: 19 gallons Entry Width: 10inch Max run time/cool down: Continuous Shreds per 8.5inchx11inch sheet: 335 Shred Speed (feet per minute): 16fpm Cut Size: .25inchx1.75inch Shreds CD/credit cards: Yes Bin full indicator: Yes Anti-Jam Technology: AUTO+ Super Quiet: Yes Sound level: 60db Self-cleaning cutters: Yes Automatic oiling: Yes Eco Friendly: Yes Finger safe/ Safety Agency: Yes/CSAus Machine Dimensions: 29inch H x 19inch W x 14inch D Weight: 80lbs Manufacturer limited warranty (cutters/machine): Lifetime/2yrs Plastic waste bag item number: 1765010 Oil item number: 1760049
    Part #: SWI-1758605

    $754.00

  25. Dahle Model 448S 51-1/8" Premium LF Rolling Trimmer with Stand - Rotary Trimmers (DAH448S) - $753.97


      Ground steel blade is encased in a protective housing for safety
      Cuts up to 20 sheets of paper at a time
      Bidirectional blade is self-sharpening and maintains a perfectly honed edge
      German engineered for precision and accuracy
      Automatic paper clamp holds work securely
      Sturdy metal base with preprinted guides
      Includes stand to provide optimal height for trimming and maximize floor space
      Cut Length: 51-1/8"
      Cut Type: Rotary
      Cut Capacity: 20 Sheets
      Paper Clamp: Yes ßÃЊ“Á
    Part #: DAH448S

    $753.97

  26. 10mil Gloss Digital Ultra Grip Laminating Film - 36" x 500' (CBDUG1036500G-03) - $752.19

      Film Type: Digital Ultra Grip Laminating Film Thickness: 10Mil Roll Width: 36inch Roll Length: 500feet Film Finish: Gloss Core Size: 3inch Part Number: CBDUG1036500G-03
    Part #: CBDUG1036500G-03

    $752.19

  27. Quartet 70" x 70" Electric Projection Screen - Audio Visual (QRT-770S) - $752.07

      High-resolution 70inchx70inch electric screen enhances impact of important presentations Matte white surface with black border provides a crisp, precise image Easy-to-use in-line switch raises and lowers screen between 3 fixed positions Hangs from wall with optional wall bracket (AW6Q) or ceiling and blends into any interior Ideal for multimedia, video and overhead projections Flame retardant and mildew resistant for long-term value Sleek, durable carrying case allows for safe, easy portability 100% Satisfaction Guaranteed GBC Quartet Part Number: 770S Primary UPC: 034138770801
    Part #: QRT-770S

    $752.07

  28. White 3/16" Gator Foam Mounting Boards 40" x 60" - 10pk (SGP-WG4060) - $751.39

      Board Type: Gator Foam Mounting Boards (Uncoated) Board Thickness: 3/16inch Board Size: 40inchx60inch Board Color: White Quantity: 10 Per Box Part Number: SGP-WG4060
    Part #: SGP-WG4060

    $751.39

  29. Martin Yale 501 Stackwagon - Bindery Accessories (MY501) - $751.05

      Conveniently transfers volumes of paper in mail-rooms, offices, print shops, copy centers, schools and hospitals Center-slope design ensures that paper rests against the inner stacking walls Heavy-duty steel construction Some assembly required Maximum Sheet Size: 11inchx11inch Dimensions: 20inchx32inch x 44inch Weight: 91 lbs. UPC Code: 11991050103 Warranty: 1Year Manufacturer Warranty
    Part #: MY501

    $751.05

  30. Lassco Wizer Cornerounder Manual Corner Cutter - Corner Rounders (CR-50) - $750.5


      The Model CR-50 Corner Rounder floor model is for large operations.
      Featuring hands-free operation and hold-down clamping that secures the stock with each stroke.
      Comes with choice of a standard cutting unit (1/8", 1/4", 3/8", or 1/2") and can easily be adaptable for using large radii up to 1-1/2".
      Corner Rounder Weight 50 lbs.
      Designed to cut paper and plastic
      Conveniently located foot pedal for fast and economical corner cutting
      Accepts Standard, Special and Large size Cutting Units
      Table Dimensions: 15" x 15"
      Shipping Weight: 70lbs Dimensional
      Shipping Dimensions: 17" x 17" x 42"
      Warranty: 1 Year on all parts and labor excluding consumables
      The Model CR-50 Corner Rounder floor model is for large operations.
      Featuring hands-free operation and hold-down clamping that secures the stock with each stroke.
      Comes with choice of a standard cutting unit (1/8", 1/4", 3/8", or 1/2") and can easily be adaptable for using large radii up to 1-1/2".
      Designed to cut paper and plastic ßÃЊ“Á
    Part #: CR-50

    $750.50

Items 1-15 of 22

Display Type List Grid
Page:   1   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   40   50   60   70   80   90   100   110   200   300   304