Product listing: Truline Preferred Pack Semi Automatic Sleeve Wrapper with Attached Tunnel (SFE-1800SA) to Ledco Heavy Duty 60" Laminator with Stand (7060200)
-
Truline Preferred Pack Semi Automatic Sleeve Wrapper with Attached Tunnel (SFE-1800SA) - $44783
- Speed: 5 to 15 PPM (Depending on product size and film thickness.)
- Electrical: 220 Volt, 3 Phase, 80 Amp
- Seal Size: 68"
- Max Roll Width: 65"
- Max Package Length: 36"
Part #: SFE-1800SA -
Challenge Champion 370 TC 37" Programmable Paper Cutter (CH-370TC) - $44250
- Up to 24 cuts per minute.
- Virtually maintenance-free design.
- Fully-adjustable knife bar gibs (front and rear).
- Electronically-adjustable and programmable clamp pressure.
- Low-pressure pre-clamping protects operator from injury (less than 66 PSI).
Part #: CH-370TC -
HSM SP 5080 Level 3 Shredder Baler Combination (HSM-365520) - $43909.75
- Optimized cutting device technology destroys 500-550 sheets of paper, creating 150 particles per page;
- Compresses 4-9 bales per hour.
- Also shreds staples, paper clips, credit/store cards, CDs/DVDs, floppy disks, and USB sticks.
- Obliterates large quantities such as archives and bulk storage.
- Material feed via electronic conveyor belt.
Part #: HSM-365520 -
Intimus VZ14.00 2mm x 15mm Cross Cut Industrial Shredder with Baler (553904) - $43898.95
- Shredded material from the first stage drops directly onto a conveyor belt which takes it straight to the final stage cutting mechanism
- Cross-cut particles drop into the compacting chamber of the 8 ton hydraulic baler and are compressed into compact bales
- Audible "bale completed" signal
- The compressed bale is simply ejected from the compacting chamber by a push-button - directly into a heavy-duty plastic bag
- Shredded material from the first stage drops directly onto a conveyor belt which takes it straight to the final stage cutting mechanism
Part #: 553904 -
Truline Preferred Pack Right Angle Fully Automatic Sleeve Wrapper with Attached Tunnel (SFE-1100AU) - $43500
- Speed: 5 to 15 PPM (Depending on product size and film thickness.)
- Electrical: 220 Volt, 3 Phase, 60 Amp
- Seal Size: 41 3/4"
- Max Roll Width: 39"
- Max Package Length: 19.5"
Part #: SFE-1100AU -
Destroyit 5009 Level P-3 High Capacity Cross-cut Shredder (DSH0331) - $43159
- Dual high powered 3 phase motor rated for continuous operation
- Fully enclosed, dust-proof gearbox housing
- Large shred compartment with easy-access door located in back of machine
- Pull-out bag frame mechanism mounted on rollers for easy replacement of disposable shred bags
- 79 gallon bin capacity
Part #: DSH0331 -
Challenge CMT-130TC Book Trimmer (CMT-130BT) - $41600
- Trim up to 2" / 50.8 mm thick perfect-bound books.
- 10.5" Color Touch screen controller with graphical display of the system with live book location.
- Fully-automated size change in under 10 seconds with no tools required.
- Modular design – can be configured off-line, near-line, or in-line at any time.
- Integrated bar code reader automates size changes between jobs.
Part #: CMT-130BT -
Morgana DigiBook 200 Automatic PUR Perfect Binding Machine (DigiBook-200) - $39990
- Up to 200 books per hour.
- Touch screen operation with automatic set up.
- Binding length (spine) from 4.7" up to 14.9".
- Spine thickness from 0.07" to 1.96".
- Adjustable spine preparation by sophisticated milling and notching device.
Part #: DigiBook-200 -
Formax AutoSeal FD 2096 Mid-Volume Production Pressure Sealer (FD-2096) - $39495
- Variable Speed: Large jobs are processed quickly at speeds of up to 30,000 forms per hour.
- Top-Loading Bottom Air Feed: The air feed deck accurately feeds forms, while allowing for continuous top feeding, with no need to stop and reload.
- Resettable Counter: 6-digit LED counter provides maximum audit control.
- Noise Reduction: Covers and fold plates are insulated to reduce operating noise.
- Rugged Construction: Designed for mid-volume production environments.
Part #: FD-2096 -
Royal Sovereign 67" Calender Heat Transfer System W/ 10" Oil Drum and Work Table (PX-181) - $39378.57
- Extra-long infra-red quartz heated drum to ensure complete heat distribution and coverage.
- Finely tuned sensors to ensure consistent temperatures throughout the transfer process.
- Universal core adapters and shaft-less unwinding technology.
- Easy to reach front and rear facing emergency stops.
- Emergency Reverse.
Part #: PX-181 -
Destroyit MBM 5009 High Capacity Cross Cut Paper Shredder - DSH0329 (MB-5009) - $39029
- Extra large feed table with powered conveyor belt feed system.
- Convenient centralized oiler for lubrication of the cutting shafts.
- Electronically controlled safety guard.
- Safety lock and key, main switch, and emergency stop button.
- Automatic power cut-off when cabinet is opened or shred bag is full.
Part #: MB-5009 -
Packaging Products Ultra-Scale Automatic Net-Weigh Single/Dual Head Scale (US-7000) - $38885
- All stainless steel contact surfaces.
- Programmable bulk & dribble setting.
- Three tray vibratory feed system.
- Nema 4 enclosure, microprocessor based controls.
- Standard 2 cubic foot supply hopper.
Part #: US-7000 -
Royal Sovereign Rollover Classic 65" x 315" Flatbed Applicator for Mounting and Laminating (10817) - $38718.57
- Key Features:
- Ideal for rigid panel application and laminating digital prints.
- Substrates up to 3.5 inches can be handled for perfectly flat applications without bubbles or creases.
- Applying digital prints and other self-adhesive applications on rigid panels such as composite board, acrylic, aluminum etc., is just one of the areas where Rollover Classic reveals its excellent properties in results and operations.
- Being able to comfortably operate the laminator with one hand while having free access to roller, media and tabletop, results in smooth and effective handling.
Part #: 10817 -
HSM HDS 230-2 Hard Drive & Back Up Media Dual Stage Shredder (HSM1777) - $38536.49
- Cutting type: Cross Cut
- Security level (DIN 66399): O-3 / T-3 / E-2 / H-5
- Cutting width: 0.39 in
- Particle length: 1 - 1.18 in
- Intake width: 5 x 1.5 x 8.25 in
Part #: HSM1777 -
Brackett 19" High-Speed Automated Circular Padder with Conveyor (CP-19) - $38435
- Slash padding coss 80%. 6-9 times faster than manual methods.
- A clean, efficient method of producing professional pads and multiple pad strips – up to one-inch thick (25.4mm) and 19 inches (482.6mm) long.
- Stacks of paper sheets (usually with chipboard stiffeners) are bonded together by a thin application of hot melt adhesive.
- Proven, trouble-free low maintenance operation.
- Performs flawlessly every day in shops worldwide. It’s a unique automated system using heavy duty materials that resist wear and corrosion.
Part #: CP-19 -
Morgana DigiFold Pro 385 High Speed Automatic Creaser and Folder with Deep Pile Feeder (DigiFold-Pro-385) - $37995
- Crease and fold sheets up to 0.02" without cracking.
- Intuitive SmartScreen touch screen control.
- Suction fed top feeder.
- Deep pile 17.72" capacity feeder.
- SmartStep table drop.
Part #: DigiFold-Pro-385 -
Proton PDS 105 HD/SSD Multimedia Shredder (PDS105) - $37850
- Destroys hard drives, solid state drives, credit/store cards, CDs/DVDs, floppy disks, USB sticks and magnetic tapes.
- Continuous operation with optional conveyor belt.
- Automatic stop and reverse to clear jams.
- Multi-function control panel for operation status and usability.
- Shreds to .39" (.99 cm) particle size.
Part #: PDS105 -
Ledco B64 64" Wide Format Hot Roll Laminator and Mounter (B640220A) - $37634.62
- Common Applications Include:
- Transfer tape applications.
- Vinyl application to sign blanks.
- Mounting and over-laminating using thermal mounting pouches.
- One sided over lamination using pressure sensitive films.
Part #: B640220A -
Formax 6608 Series Mid-Volume Folder and Inserter (FD6608) - $37495
- Full-Color Touchscreen: 10" touchscreen display features graphic icons for simple, intuitive use.
- Modular Flexibility: Configurations are available with up to 7 fully-automatic feed stations.
- AutoSetTM: Load envelopes and documents and the 6608 Series will adjust all settings automatically.
- Paper & Envelope Presence Sensors: Control panel displays which feeders need to be refilled.
- Mid-Volume Processing Speed: Processes up to 4,300 envelopes per hour.
Part #: FD6608 -
James Burn Lhermite AlphaDoc MK4 Automatic Binding Punch (04ALPHADOC) - $37350
- High Productivity: With a top speed of 90 cycles / minute, it can punch up to 94,200 sheets per hour without the constant presence of the operator required.
- Large capacity: The high pile feeder and reception trays will accomidate up to 6 reams of paper.
- Versatility: The Alpha-Doc MK4 can punch a wide variety of paper stock and covers including tab cut sheets and wall calendars with thumbcut, in virtually any size from 5.4" x 5.4" up to 14" x 13".
- Easy-to-Use: Just load the tray and push a button, no special training is required.
- Simple Formating: Just follow the instructions on the conversational touch screen and, with pre-set standard formats, size change-over can be done in less than 2 minutes.
Part #: 04ALPHADOC -
Intimus 16.86 Smartshred 10mm x 70mm Level P-2 Cross-Cut Industrial Shredder with Baler (656144+475901) - $37328.24
- Features:
- Shredder features see Model 16.50 SmartShred.
- Electronic compacting chamber level monitoring.
- Shredder loading can be continued while baler is compressing the material.
- Pushbutton control for bale ejection.
Part #: 656144+475901 -
Intimus 16.86 Smartshred 6mm x 50mm Level P-3 Cross-Cut Industrial Shredder with Baler (656124+475901) - $37328.24
- Features:
- Shredder features see Model 16.50 SmartShred.
- Electronic compacting chamber level monitoring.
- Shredder loading can be continued while baler is compressing the material.
- Pushbutton control for bale ejection.
Part #: 656124+475901 -
HSM FA500.3 Level P-5 Cross-cut Industrial Shredder (HSM1993) - $36248.75
- Order number: HSM1993
- EAN Code: 4026631033213
- Shredder material: Paper, CD/DVD, Floppy Disk, USB Stick, Paper Clip and Credit/Store Cards
- Cutting type: Cross Cut
- Security level (DIN 66399): P-5 (Old Level 4)
Part #: HSM1993 -
Truline Preferred Pack Right Angle Fully Automatic Sleeve Wrapper with Attached Tunnel (SFE-800AU) - $35588
- Speed: 5 to 15 PPM (Depending on product size and film thickness.)
- Electrical: 220 Volt, 3 Phase, 50 Amp
- Seal Size: 29.5"
- Max Roll Width: 27"
- Max Package Length: 19.5"
Part #: SFE-800AU -
Vivid Matrix 20" Pneumatic Dual Sided Roll Laminator (MX-530DP) - $35485
- Pneumatic pressure.
- Laminate both sides at the same time.
- Retrofits to the MX-530.
- Easy-to-use control panel.
- Anti-curl technology.
Part #: MX-530DP -
Truline Preferred Pack Inline Fully Automatic Sleeve Wrapper with Attached Tunnel (SFE-1100NF) - $35388
- Speed: 5 to 20 PPM (Depending on product size and film thickness.)
- Electrical: 220 Volt, 3 Phase, 70 Amp
- Seal Size: 41 3/4"
- Max Roll Width: 39"
- Max Package Height: 17"
Part #: SFE-1100NF -
MBM Aerocut Velocity Complete Air Feed Paper Slitter-Cutter-Creaser-Perforator Digital Finisher (Aerocut-Velocity) - $34999
- The touch screen allows operators to set job programs and run the machine intuitively and instantly.
- Flex mode allows operators to cut multiple size of cards from a page and add desired numbers of creases on these. It enables designers and printers to create new aspects of applications.
- The patented "Tri-Suction Feeding Mechanism" reduces risks of double feeds and mis-feeds drastically, therefore it prevents paper jam inside and enhances productivity.
- The self-sharpening slitter and blade unit allows the machine to cut up to 400 gsm with no wear.
- The Velocity can change jobs instantly and is the ideal solution for finishing digitally printed applications, such as business cards, post cards, invitations, greeting cards, leaflets, tickets and more.
Part #: Aerocut-Velocity -
Formax Atlas C300 High-Speed Automatic Creaser and Folder (Atlas-C300) - $34995
- Color touchscreen control panel.
- Fully automatic setup.
- Processes up to 6,000 sheets per hour.
- Handles sheets up to 27.5" x 15.1".
- Contoured floating knives prevent marking of digital prints.
Part #: Atlas-C300 -
HSM FA500.3c Cross-cut Industrial Shredder (HSM1991) - $34678.71
- Order number: HSM1991
- EAN Code: 4026631033206
- Shredder material: Paper, CD/DVD, Floppy Disk, USB Stick, Paper Clip and Credit/Store Cards
- Cutting type: Cross Cut
- Security level (DIN 66399): P-3 (Old level 2)
Part #: HSM1991 -
Ledco Heavy Duty 60" Laminator with Stand (7060200) - $34675.29
- Intelligent heat controllers display both the set temperature and the actual temperature. The microprocessor in the control quickly learns to anticipate the heat demand of each job and keeps the actual temperature within a few degrees of the set temperature.
- Laminating and pull rollers are covered with quality silicone rubber for superior release quality, higher lamination quality and easier cleaning. The laminating rollers and pull rollers are interchangeable to help keep maintenance costs down.
- Pneumatic power opens or closes the laminating and pull rollers and gives you a precise and independent control of roll pressure. A compressor is built in so that shop air is not required.
- Removable heat shoes are Teflon coated to reduce film abrasion. They are easily unplugged and removed to clean or replace the laminating rollers.
- Built-in retractable slitters save an enormous amount of cutting time by trimming away side scrap during the lamination process. The two heads can be adjusted independently with great precision.
Part #: 7060200
