Product listing: James Burn Lhermite DocuPunch 2:1 Square Hole Wire Die Set (04DOCUPUN21S) to Swingline CX22-44 TAA Compliant Cross-Cut Shredder - 1758582B (SWI-1758582)

Page
View by: Title (A-Z)  |  Title (Z-A)  |  Price (High-to-Low)  |  Price (Low-to-High)  |  Popularity  |  Best Sellers  |  Category  |  Product Number
  1. James Burn Lhermite DocuPunch 2:1 Square Hole Wire Die Set (04DOCUPUN21S) - $3100

    • Type: DocuPunch Interchangeable Die Set
    • Punching Pattern : 2:1 Pitch
    • Hole Shape: Square
    • Hole Size: 6mm
    • Part Number: 04DOCUPUN21S
    Part #: 04DOCUPUN21S

    $3100.00

  2. Xyron 4400 44" Wide Format Cold Process Laminator (XRN4400) - $3089.89

    • Aggressive adhesive, coupled with high pressure rollers, improves both transfer and bonding qualities
    • Patented supplies allow quick and easy application changes
    • Even, edge-to-edge adhesive application
    • Environmentally safe
    • Footprint: 51" x 19" x 17" (130cm x 49cm x 44cm)
    Part #: XRN4400

    $3089.89

  3. Swingline Stack-and-Shred 600M Auto-Feed Micro Cut Shredder (SWI-1758577) - $3075.81

    • Spend less time shredding versus a traditional shredder - just stack, shut and you're done
    • Micro-cut shredder meets high security needs (Level P-5)
    • Shred up to 600 sheets with automatic shredding and up to 9 sheets at a time during manual feed shredding
    • 21-gallon pull-out waste bin with bin full indicator
    • Continuous duty run time lets you shred more paper faster
    Part #: SWI-1758577

    $3075.81

  4. GBC AP2 Ultra VeloBind Die Set (0177499400) - $3057.69

    • Type: GBC AP2 Ultra Die Set
    • Manufacturer: GBC (General Binding Corporation)
    • Punching Pattern: GBC Velobind
    • Pitch: 1" On Center
    • Hole Shape: Round
    Part #: 0177499400

    $3057.69

  5. Foster On-A-Roll Lifter Low Profile Grande Apex (61598) - $3055.5

    • Designed to handle heavy rolls that require lower clearances.
    • The front caster wheels are fixed to allow the front to fit under tight areas.
    • Pair of heavy-duty rear swivel casters with easy step-on locking brake.
    • Specially designed tray for easy loading and unloading rolls.
    • Reduces on-the-job injuries and enables all workers to move heavy rolls.
    Part #: 61598

    $3055.50

  6. SealerSales 20" Retractable Nozzle Vacuum Sealer w/ Self-Contained Compressor (CAVS-20) - $3053.71

    • 100% maintenance free venture vacuum pumps.
    • Intuitive design.
    • Extensive safety features.
    • Rust-treated and powder-coated steel chassis.
    • Clean-room compatible.
    Part #: CAVS-20

    $3053.71

  7. James Burn Lhermite AlphaDoc MK4 14" Punch - 2:1 Square Hole Wire Die Set (04ALPHAMK421S) - $3050

    • Type: Alpha-Doc MK4 Interchangeable Die Set
    • Punching Pattern : 2:1 Pitch
    • Hole Shape: Square
    • Hole Size: 6mm
    • Part Number: 04ALPHAMK421S
    Part #: 04ALPHAMK421S

    $3050.00

  8. GBC AP2 Ultra 2-4 Round Hole 1/4" Looseleaf Die Set (0177498800) - $3035.99

    • Type: GBC AP2 Ultra Die Set
    • Manufacturer: GBC (General Binding Corporation)
    • Punching Pattern: 2-4 hole 1/4"
    • Pitch: n/a
    • Hole Shape: Round
    Part #: 0177498800

    $3035.99

  9. GBC AP2 Ultra 2-4 Round Hole 5/16" Looseleaf Die Set (0177499600) - $3035.99

    • Type: GBC AP2 Ultra Die Set
    • Manufacturer: GBC (General Binding Corporation)
    • Punching Pattern: 2-4 hole 5/16"
    • Pitch: n/a
    • Hole Shape: Round
    Part #: 0177499600

    $3035.99

  10. Rhin-O-Tuff Large Office Electric Plastic Comb Binding System (4000PB) - $3035

    • Die with easy disengageable pins - Included
    • Manual Inserter ? Included
    • Mounting kit ? Included
    • Automatic and Manual Reverse feature to reduce jamming in the punch
    • Punches up to 20 sheets of 20 lb paper
    Part #: 4000PB

    $3035.00

  11. SealerSales Free-Standing Horizontal Dry Ink Coding Continuous Band Sealer (FRM-1120C) - $3030.69

    • Durable stainless steel construction.
    • Easy to operate - minimal operator training.
    • Fast warm up time.
    • Ideal for medium duty applications.
    • Tilting seal head which allows the machine to tilt up to 30 degrees.
    Part #: FRM-1120C

    $3030.69

  12. Drytac Visual Magnetics POLYeight Plus 13mil 60" x 300' Satin White Magnetic Receptive Print Media (VMP813-60300A) - $3013.33

    • Bright, white satin finish optimized for analog, latex and UV-Cured print devices.
    • Thicker, 13-mil polyester base.
    • Economical with quality "hand."
    • Water/ smudge resistant print surface.
    • 100% opaque – No show through.
    Part #: VMP813-60300A

    $3013.33

  13. GBC AP2 Ultra 3-5-7 Round Hole 5/16" Looseleaf Die Set (0177498000) - $3002.99

    • Type: GBC AP2 Ultra Die Set
    • Manufacturer: GBC (General Binding Corporation)
    • Punching Pattern: 3-5-7 Round 5/16"
    • Pitch: n/a
    • Hole Shape: Round
    Part #: 0177498000

    $3002.99

  14. Cubify CubeX Duo 3D Printer (3DS-401384) - $2999

    • Recyclable PLA or ABS plastic cartridges.
    • Print as big as a Basketball. Resolution: 100 microns
    • Design Software Included. Includes a free license of Cubify Invent Software and material to get you started.
    • Professional printability. Advanced settings to create inspiring prints.
    • Print in 18 colors of ABS and PLA.
    Part #: 3DS-401384

    $2999.00

  15. Tamerica VersaLam 2700-P 27" One Side / Two Side Roll Laminator (TP-VERSALAM2700P) - $2999

    • Variable Speed and Temperature control.
    • Accepts up to 10 mil films.
    • One sided and two sided laminating.
    • Laminating rollers made of top-grade silicon rubber.
    • Silicon Heated roller for easy clearing and scratch-free lamination.
    Part #: TP-VERSALAM2700P

    $2999.00

  16. HSM 411.2 OMDD High Security Paper Shredder (HSM1570) - $2998.62

    • Made in Germany: All HSM Classic & Securio Models are Made in Germany. Precision Engineering. TAA Compliant.
    • Solid Steel Cutting Cylinders: Cutting Heads are Manufactured from 100% Steel. Maintains High Cutting Capabilities While Using Less Energy. V-groove Technology Ensures Precise Cutting.
    • Anti-Jam Technology with Reverse Function: Prevents Jams When Machine is Overloaded. Increasing Productivity. Saves Unanticipated Repair Costs.
    • High Security EPL Listed: Meets D.O.D. and NSA/CSS 02-01 Mandatory Security Requirements. EPL Listed to Ensure that Sensitive Documents are Destroyed at the Highest Security Level.
    • Continuous Duty Motor: Allows for Continual Shredding with no Down Time. Longer Run Time Resulting in Reduced Labor Cost. Increasing Productivity.
    Part #: HSM1570

    $2998.62

  17. GBC Magnapunch Pro Interchangeable Die Punch (7705643) - $2998

    • Fast Performance
    • Half-second punch cycle
    • Efficient power system driven by flywheel technology that converts electric energy to kinetic energy, allowing for faster acceleration and punching.
    • Punches up to 49 sheets at a time (varies by punch pattern), and 49,000 sheets per hour
    • Punch activated by table top trigger or foot pedal to maximize throughput.
    Part #: 7705643

    $2998.00

  18. Challenge Manual Single Cornering Machine (CH-RCM) - $2995

    • 6 sizes of cornering knives
    • Handles any size sheet
    • 2"/ 5 cm lift capacity
    • Manual operation
    • Precise cutting action
    Part #: CH-RCM

    $2995.00

  19. Challenge Refurbished Spartan 150SA Semi Automatic Electric Paper Cutter (MY150SA) - $2995

    • Power Cutting: Electric power - 1/2HP Gear Drive Motor
    • Manual Clamping: Hand crank wheel system provides over 200% more clamping force than the lever clamping system. RESULT - a better cut.
    • Safety Guards: Safety covers over the front table (the cutting area) and rear table.
    • Safety Dual Cut Buttons: Requires the simultaneous use of both hands to operate.
    • Construction: Heavy Duty Steel, Cast Iron, and Cast Aluminum Construction gives it "Challenge durability". Hardened steel components and bronze bearings on most wear surfaces increase the life of the machine.
    Part #: MY150SA

    $2995.00

  20. Fastbind BooXTer Trio Semi-Automatic Binder (FBBXDTRE) - $2995

    • Semi-Automatic Operation. The semi-automatic operation of BooXTer Trio simplifies your finishing process, making it ideal for serial production. Just place the paper block in the machine and press the start button. BooXTer Trio™ recognizes the sheet format automatically and accurately places staples based on the selected program (manual, single-sided, double side).
    • Ergonomic and compact design.
    • Binds any format up to SRA3.
    • Compatible with: Fastbind Case Makers, Fastbind Creasers, Fastbind Presso.
    • Cover Setter (Not Included). The BooXTer Trio can be expanded with the optional Fastbind Cover Setter. A positioning tool for adding hard covers to your paper blocks. The Fastbind Cover Setter can be mounted to BooXTer Trio™ or used as a standalone unit.
    Part #: FBBXDTRE

    $2995.00

  21. Rhin-O-Tuff 4:1 Coil Oversized Oval 47-Hole Die Set For Tornado Autopunch EX (T0247) - $2995

    • Recommended Paper Sizes: A4/A5
    • Punching Pattern: 4:1 Coil Oversized Oval, 47-Holes
    • Pitch: .2475" Pitch (Center-to-Center Hole Spacing)
    • Hole Size: .188" x .156"
    • Edge Margin: .188"
    Part #: T0247

    $2995.00

  22. Rhin-O-Tuff 4:1 Coil Oversized Oval 48-Hole Die Set For Tornado Autopunch EX (T0248) - $1995

    • Recommended Paper Sizes: LTR/Half LTR/12"
    • Punching Pattern: 4:1 Coil Oversized Oval, 48-Holes
    • Pitch: .2475" Pitch (Center-to-Center Hole Spacing)
    • Hole Size: .188" x .156"
    • Edge Margin: .188"
    Part #: T0248

    $1995.00

  23. SealerSales Semi-Automatic Uniform Carton Sealer w/ Bottom Drive Belts (CS-19517) - $2995

    • Easy Manual Carton Size Adjustment
    • A"Patented" Tape Head with "Easy Thread Design".
    • Interchangeable Tape Heads.
    • Side Pressure Rollers to Close Box Top.
    • 2 Bottom Drive Belts - Positive Feed.
    Part #: CS-19517

    $2995.00

  24. Safety Speed H6 Full-Sized 74" Vertical Panel Saw (SS-H6) - $2990.12

    • 3 1/4 Hp, 15 amp industrial duty saw motor.
    • Zinc plated 1 3/4" steel guide tubes.
    • 4 Nylatron roller bearing systems.
    • Adjustable vertical and horizontal rulers.
    • Quick change from vertical to horizontal cutting.
    Part #: SS-H6

    $2990.12

  25. Morgana ElectroCreaser 52 Semi-Automatic 20.5" Creasing Machine (ElectroCreaser-52) - $2990

    • Fast & easy to setup.
    • Semi-automatic.
    • Foot switch operation.
    • Takes stock up to 0.015" (approx 150lb cover)*.
    • Rule and matrix guaranteed for life.
    Part #: ElectroCreaser-52

    $2990.00

  26. GBC ColorCoil .250 Round Hole USP13 Die Set (0314150000) - $2986.89

    • Type: GBC / Sickinger USP13 Die Set
    • Manufacturer: GBC (General Binding Corporation)
    • Punching Pattern: GBC ColorCoil
    • Pitch: 4:1 Pitch (0.250)
    • Hole Shape: Round
    Part #: 0314150000

    $2986.89

  27. Fletcher-Terry F3100 63" Multi-Material Cutter (Fletcher-F3100) - $2986.5

    • Wall-Mounted (stand accessory available seperately)
    • Cuts foamboard, PVC and corrugated plastics up to 1/2" (12.7mm) thick
    • Cuts hardboard (MDF) up to 3/32" (2.4mm)
    • Scores glass and plastic up to 1/4" (6.35mm)
    • Spring loaded cutting head assembly with interchangeable pillar post.
    Part #: Fletcher-F3100

    $2986.50

  28. Swingline Stack-and-Shred 750X Auto Feed Cross-Cut Shredder with SmarTech (SWI-1757578) - $2982.93

    • Time-saving shredder with SmarTech lets you shred faster than ever – just stack, shut and walk away with peace of mind that your job will be completed.
    • SmarTech functionality sends real-time shredding status updates to your phone via the Smartech Shredder App. Notifications include “Shredding”, “Paper Jam”, “Job Complete” and more.
    • Features easy setup with no IT required; simply download the app from iTunes or the Google Play Store and pair your device.
    • Administrators can manage multiple shredders at once. Real time status updates indicate if shredders are jammed, bins are full, or oil is low. The app also allows for quick reordering of supplies to simplify maintenance.
    • Super cross-cut shred style has added security (Level P-4) for sensitive documents. PIN protected lockable paper chamber keeps documents secure while jobs are in progress.
    Part #: SWI-1757578

    $2982.93

  29. Ledco Premier 4 25" Roll Laminator 110V - 4025100C (4025110-A) - $2978.99

    • Variable Speed. Operates at any speed up to 10 feet per minute. Thicker films are generally applied better at mid-range to lower speeds, while 1.5 mil film should be applied at mid-range to higher speeds.
    • Digital thermometer and temperature control. Makes it easy to set and maintain the right temperature. The digital indicator light flashes as the machine warms up. At set temperature the indicator light stops flashing and a ready light comes on.
    • Simple controls. Membrane switches provide a compact, reliable control pad. Icons and international symbols are used for controls and safety warnings so that understanding operation of the laminator is "intuitive" and not language dependent.
    • Slitters. Experts know the value of slitters for laminating a quantity of same-size sheets. The slitters remove the side scrap from both sides of each sheet as it goes through the laminator. This greatly reduces the amount of time required for trimming.
    • Glitch-proof threading. Threading can be the most difficult aspect of using a laminator, so the Premier 4 has built-in threading aids. The top idler is guarded from the top heat shoe for safety and easy threading. The bottom idler is attached to the feed tray. Once the upper and lower webs of film have been run through the machine, bottom idler threading is automatic when the operator puts the feed tray on the machine.
    Part #: 4025110-A

    $2978.99

  30. Swingline CX22-44 TAA Compliant Cross-Cut Shredder - 1758582B (SWI-1758582) - $2976

    • TAA Compliant; made in Germany
    • Cross-cut shredder meets everyday security needs (Level P-3)
    • Shreds up to 22 sheets at a time
    • 44-gallon pull-out waste bin with bin full indicator
    • Extra-wide 15" paper entry facilitates shredding of large format sheets
    Part #: SWI-1758582

    $2976.00

Items 1-15 of 22

Display Type List Grid
Page:   1   10   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   50   60   70   80   90   100   110   120   200   300   400   500   600   700   800   900   1,000   1,105