Product listing: Rhin-O-Tuff ONYX Heavy Duty Punch (4000PLUS) to Drylam School-Lam 27" School Laminator (DL-SL27)
-
Rhin-O-Tuff ONYX Heavy Duty Punch (4000PLUS) - $1848.85
- The OD ONYX 4000PLUS Punch Comes With An Auto Reversing Feature That Prevents Jams.
- All Dies for the ONYX 4000PLUS Feature Rhin-O-Tuff's Ingenious Patented Swing Away Die Pin Retainer System. Allows Quick Access to all Die Punch Pins while Holding them Firmly in Place. Easily Disengage Any Die Punch Pin.
- 12 Standard Interchangeable Die Patterns Available. Including dies for comb binding, wire binding, plastic coil binding, Velobind and 3 hole loose leaf
- Easy, "Paper to Pin" Sight Alignment, For Balanced Hole to Edge Margins on Odd-Sized Applications.
- Punching Capacity Rated up to 20 Sheets of 20 lb. or 80gsm. The Number of Sheets Depends on the Paper Weight and Punch Pattern Used.
Part #: 4000PLUS -
MBM AJ 700 Air-Feed Floor Model Jogger (MB-AJ700) - $1846.16
- Paper Size: 5" x 7 3/8" to 12 7/8" x 17 3/4"
- Sheet Capacity: 1,000
- Power Supply: 115v, 60Hz
- Max Horsepower: 1/2
- Dimensions: 17" x 22" x 45 1/4"
Part #: MB-AJ700 -
Count Tablematic Plus Tabletop Numbering Machine (CTABLEM) - $1845
- Full 11-1/2" x 16" work base
- Accommodates single sheets, crash numbers, and multipart forms up to 6 parts magnetic backstop and built-in side rails for positive registration
- Six digit numbering head
- Tablematic offers a user friendly attitude and flexability
- 14" wide unit is designed to do high-quality numbering
Part #: CTABLEM -
Challenge iJog Paper Jogger with Air Assist (CH-IJOGAIR) - $1832.5
- Robust, electro-mechanical jogging action
- Front-side loading
- Foot pedal control
- Adjustable air flow - dial from zero to 112 CFM
- Two jogging speeds
Part #: CH-IJOGAIR -
Destroyit 3104 Level P-4 Cross-Cut Paper Shredder - DSH0315 (MB-3104CC) - $1829
- Quiet and powerful single phase motor (1 maximum horsepower) rated for continuous operation
- Fully enclosed, dust proof gearbox housing
- High quality wooden cabinet mounted on casters
- Pull-out bag frame mechanism mounted on rollers for easy replacement of disposable shred bags
- 37 Gallon Bin Capacity
Part #: MB-3104CC -
Destroyit 3104 Level P-5 Micro-cut Shredder (DSH0316) - $1829
- Automatic start and stop controlled by photo cell
- ECC (Electronic Capacity Control) indicator helps prevent paper jams by indicating sheet capacity levels during the shredding process
- Wide, 12" feed opening
- High quality, hardened steel cutting shafts take staples, paper clips, credit cards, and CDs
- Lifetime warranty on the cutting shafts
Part #: DSH0316 -
Keencut Evolution3 84" SmartFold Cutter (61387) - $1827
- Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
- The Lift-and-Hover saves time and avoids mistakes allowing users to line up their cuts quicker and more accurately.
- Site line strip enables operators to see exactly where the cut line is.
- The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
- Swing-down under-bench storage to leave work surface clear.
Part #: 61387 -
Martin Yale Automatic Paper Folder (1811) - $1817.75
- Great to use in mailrooms, offices, churches, schools, businesses and associations.
- Handles paper weight from 16lb. bond to 135# Offset, 60 gsm to 240 gsm.
- Operates at a speed of up to 12,000 sheets per hour.
- Automatically feeds, folds and collects a stack of documents.
- Folds sheet sizes from 4.0" L x 4.0" W to 17.0" L x 11.0" W.
Part #: 1811 -
Lassco Wizer CR-55 Manual Corner Cutter with 1/4" and 3/8" Die & Blades (CR-55A) - $1814.45
- The Model CR-55 Corner Rounder floor model is for large operations, with a 2" cutting capacity.
- Featuring hands-free operation and hold-down clamping that secures the stock with each stroke.
- Comes with 1 die and 1/4" and 3/8" blades.
- Corner Rounder Weight 79lbs.
- Designed to cut paper and plastic
Part #: CR-55A -
GBC Octiva Cold Mount OC 51" x 250' 3" Core (9300896) - $1811.49
- Film Type: GBC Artctic Thermal Mount OC / Octiva Cold Mount
- Thickness: n/a
- Roll Width: 51"
- Roll Length: 250'
- Film Finish: Optically Clear
Part #: 9300896 -
Fellowes AeraMax Pro AM 4 PC PureView Professional Air Purifier (9573101) - $1799.99
- PureView shows the status of the current room air quality including percentage of particles captured and removed from the air.
- Cleans air 600 to 1400 square feet.
- Display Screen shows PM 2.5 and PM 10 air quality – making the invisible, visible!
- EnviroSmart 2.0 includes dual self-regulating laser particle counters, VOC, audio and motion sensors.
- VOC/odor level display.
Part #: 9573101 -
Akiles CoilMac EPI+ Electric Oval Hole Coil Binding Machine (CoilMac-EPI+) - $1799
- Fully Disengageable Punch Pins: For a clean punch with virtually any document length.
- Side Margin Control: Provides and evenly centered punch for all document sizes.
- Punching & Inserting Switch
- Electric Coil Inserter: Allows the operator the free working of both hands and complete control of roller. Drastically reduces time and costs by making the inserting surprisingly fast and easy.
- Foot Pedal Operated
Part #: CoilMac-EPI+ -
Martin Yale 930A Continuous Form Check Signer (MY930A) - $1799
- Locking security system with single key access
- Signs continuous form checks and document from 51/2" to 161/2" wide and either 31/2" or 7" long
- Handles up to 240 documents per minute
- Easy to use registration system
- Batch counter
Part #: MY930A -
Tamerica + 14" Two-Sided Thermal Roll Laminator and Foil Fuser (TCC-1400F+) - $1799
- Laminates from 1.5 – 5 mil at 8.8 fpm
- 14” Laminating Width
- Temperature conversion (C/F)
- Foil Fuser
- Mounts up to 3/16”
Part #: TCC-1400F+ -
Graphtec 24" Vinyl Cutter and Plotter with Stand (CE6000-60 Plus) - $1795
- 3.7 inch wide user-friendly LCD control Panel. Setting can be easily configured using the large LCD (3.7-inches, 240x128 dots) and tactile control panel. It is also icon driven and supports 10 languages..
- High adaptability to the operating environment. The design of the media feed system ensures that loaded media is acclimated to the ambient temperature and humidity before plotting or cutting. The user-selectable media pre-feed function sets two outer tracks, enhancing media handling. Together, these two media feed elements ensure reliable cutting and plotting quality within the desired operating environment.
- Easy to use in simple operation mode. Two set up menus: simple and normal are available an can be chosen by the operator as desired.
- Media brake on the media stocker. A brake system is incorporated to assist loading heavy rolls of media properly.
- Dual tool configuration and easy switching between cutting and plotting. The pen carriage holds both a plotting pen and a blade at the same time — to enable easy switching between plotting and cutting operations. Four sets of user-specified setup parameters are retained in memory for instantaneous recall. The pen is for plotting and detailing graded patterns with seams, text, notches, Grain direction, etc.
Part #: CE6000-60 Plus -
FuseFx 27" Variable Speed Desktop Roll Laminator (FX27) - $1791
- Use as a desktop system.
- Adjustable temperature with digital readout for precise heat control.
- Variable speed motor with electric reverse.
- Accepts film from 12"- 27".
- Runs laminates up to 3 mil thickness.
Part #: FX27 -
Keencut 40" Ultimat Gold Mat Cutter (61210) - $1791
- Sculpted precision cutting head for comfort and precise cutting.
- Bevel head with ejector and lock for quick blade changing.
- Unique 'clip on' margin guide and squaring arm allows for easy removal when not in use; no tools required maximum margin width is 19cm (7.5").
- Unique roller 'lift and hold' system raises or lowers the cutter bar and frees both hands.
- 75cm (30") clip on matguide extension kit complete with 60cm support arms.
Part #: 61210 -
GBC CC2700 Modular Electric Coil Inserter (7301080) - $1790.56
- Electrically winds coil elements from 5mm to 33mm, any pitch.
- Hand crimpers complete the binding process and can be stored in a built-in pocket in the CC2700.
- Bottom roller adjusts to 3 positions allowing for maximum roller contact for all coil sizes.
- Exclusive spine former helps shape the punched edge of the document to the coil curve, speeding up insertion.
- Modular design allows the CC2700 to be stacked on any GBC modular punch for space savings or separated for two-person workflow.
Part #: 7301080 -
Marlon 350E Double Head Spiral Coil Electric Crimper (MARLON350E) - $1788.99
- Crimps 6mm through 50mm coil
- Minimum binding edge is 3 1/2 inches
- Coil waste chute
- 50 cycles per minute
- Interchangeable cutter blades (A Size for 6mm - 7mm, B Size for 8mm to 25mm, C Size for 12mm to 50mm)
Part #: MARLON350E -
Drylam 27" Professional Series Roll Laminator (DL-27STA) - $1786.9
- Laminates up to 27" wide.
- Up to 9.5' per minute
- User defined Preset save speed and temperature settings
- Usage counter with reset
- Hand held slitter with convenient storage on the machine
Part #: DL-27STA -
Renz DTP 340A Round Hole 3:1 Ring Wire Die Set with Thumbcut (RZ340A31RDT) - $1781
- Pitch Pattern: 3:1
- Hole Shape: Round
- Hole Size: 4mm
- Thumbcut: Yes
- Part Number: RZ340A31RDT
Part #: RZ340A31RDT -
Renz DTP 340A Square Hole 3:1 Ring Wire Die Set with Thumbcut (RZ340A31SQT) - $1781
- Pitch Pattern: 3:1
- Hole Shape: Square
- Hole Size: 4mm x 4mm
- Thumbcut: Yes
- Part Number: RZ340A31SQT
Part #: RZ340A31SQT -
Renz DTP 340M Round Hole 3:1 Ring Wire Die Set with Thumbcut (RZ340M31RDT) - $1781
- Pitch Pattern: 3:1
- Hole Shape: Round
- Hole Size: 4mm
- Thumbcut: Yes
- Part Number: RZ340M31RDT
Part #: RZ340M31RDT -
Renz DTP 340M Square Hole 3:1 Ring Wire Die Set with Thumbcut (RZ340M31SQT) - $1781
- Pitch Pattern: 3:1
- Hole Shape: Square
- Hole Size: 4mm x 4mm
- Thumbcut: Yes
- Part Number: RZ340M31SQT
Part #: RZ340M31SQT -
Graphic Whizard PT 4x4 Storage Cart (GW-PT4X4) - $1777.5
- 16 Heavy Duty shelves standard.
- Optional shelf extension allows for paper sizes up to 14" x 25" to be stored.
- Heavy Duty Casters.
- Side handles for ease of movement.
- Capacity: Up to 13" x 19" (and Beyond)
Part #: GW-PT4X4 -
Keencut Evolution3 124" BenchTop Cutter (61289) - $1777.5
- Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
- The Lift-and-Hover saves time and avoids mistakes allowing users to line up their cuts quicker and more accurately.
- Site line strip enables operators to see exactly where the cut line is.
- The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
- Anti-sag system holds the cutter bar level for accurate line-up.
Part #: 61289 -
Keencut Evolution3 142" BenchTop Cutter (61290) - $1777.5
- Evolution3 is guaranteed to cut within .008" of a straight line for the length of the cut.
- The Lift-and-Hover saves time and avoids mistakes allowing users to line up their cuts quicker and more accurately.
- Site line strip enables operators to see exactly where the cut line is.
- The stainless steel slideway track and rollers on the QuikSwap tool heads provide a very strong and steady movement up and down the machine, with very little sideways motion that could misalign the cut.
- Anti-sag system holds the cutter bar level for accurate line-up.
Part #: 61290 -
Fellowes AeraMax Pro AM 4S Stainless Professional Air Purifier with Stand (9451201) - $1775.49
- Large room commercial air purifier cleans the air in 600-1400 square feet spaces including classrooms, locker rooms and cafeterias.
- True HEPA filter captures 99.97% of airborne contaminants including viruses and allergens.
- Activated carbon filter reduces odors and VOCs.
- Patented EnviroSmart technology detects the environment and automatically adjusts performance.
- Includes floor stand.
Part #: 9451201 -
HSM Securio B32 Level P-7 High Security Cross-cut Shredder (HSM18244) - $1770.38
- Optimized cutting device technology destroys 7-9 sheets of paper, creating 12,065 cross-cut / confetti-cut particles per page
- Solid Steel Cutting Cylinder made from 100% solid steel for high cutting capacities
- Anti-Jam Technology prevents jams when paper shredder is overloaded
- Continuous Duty Operation saves your time
- Saves energy consumption by up to 90%
Part #: HSM18244 -
Drylam School-Lam 27" School Laminator (DL-SL27) - $1770.36
- Laminates up to 27" wide.
- Fixed speed at 5' per minute
- Uses School Grade Laminating Films , 1.5 mil and 3.0 mil
- Hand held slitter with convenient storage on the machine
- Adjustable Feedguide for precision lamination
Part #: DL-SL27
